United States Court of Appeals
for the Federal Circuit
______________________
E.I. DU PONT DE NEMOURS & COMPANY,
Plaintiff-Appellee
v.
UNIFRAX I LLC,
Defendant-Appellant
______________________
2017-2575
______________________
Appeal from the United States District Court for the
District of Delaware in No. 1:14-cv-01250-RGA, Judge
Richard G. Andrews.
______________________
Decided: April 17, 2019
______________________
CHRISTOPHER LANDGRAFF, Bartlit Beck LLP, Chicago,
IL, argued for plaintiff-appellee. Also represented by
SHARON DESH, MARK LESLIE LEVINE.
JACOB M. HOLDREITH, Robins Kaplan LLP, Minneap-
olis, MN, argued for defendant-appellant. Also repre-
sented by BRENDA L. JOLY, DAVID ALLEN PRANGE.
______________________
Before O’MALLEY, REYNA, and HUGHES, Circuit Judges.
2 E.I. DU PONT DE NEMOURS & CO. v. UNIFRAX I LLC
Opinion for the court filed by Circuit Judge REYNA.
Dissenting opinion filed by Circuit Judge O’MALLEY.
REYNA, Circuit Judge.
This appeal arises from a patent infringement suit filed
in the U.S. District Court for the District of Delaware. De-
fendant-Appellant Unifrax I LLC appeals from the district
court’s claim construction and denial of its motions for
judgment of non-infringement and invalidity as a matter of
law after a jury found that Unifrax I LLC’s flame barrier
product infringed the asserted patent and that Unifrax I
LLC failed to prove the asserted patent was invalid. Be-
cause the district court correctly construed “100% by
weight” and substantial evidence supports the jury’s ver-
dict, we affirm.
BACKGROUND
I. The Asserted Patent
U.S. Patent No. 8,607,926 (“the ’926 patent”), entitled
“Composite Flame Barrier Laminate for a Thermal and
Acoustic Insulation Blanket,” issued on December 17,
2013. The ’926 patent claims composite laminates that are
incorporated into thermal-acoustic blankets installed on
the interior of the fuselage in aircraft to shield passengers
from flames and reduce noise. The laminates claimed in
the ’926 patent have three layers of materials: (1) a poly-
meric film layer; (2) an inorganic refractory layer; and (3)
an adhesive layer between the film and refractory layer.
’926 patent col. 1 ll. 48–51; col. 9, ll. 6–17 (claim 1); Fig. 1.
The ’926 patent lists Drs. Llewellyn Bentley (“Ley”) Rich-
ardson, III, and Darisuz Wlodzimierz Kawka of E.I. du
Pont de Nemours & Company (“DuPont”) as inventors.
The application that led to the ’926 patent was filed on
December 14, 2011, as a continuation-in-part of the appli-
cation that led to U.S. Patent No. 8,292,027 (“the ’027 pa-
tent”). The parent ’027 patent claims a polymeric film layer
E.I. DU PONT DE NEMOURS & CO. v. UNIFRAX I LLC 3
and an inorganic refractory layer but not an adhesive layer.
The ’027 patent also names Dr. Richardson as an inventor
but does not name Dr. Kawka.
The primary dispute in this case concerns the “inor-
ganic refractory layer,” which generally consists of “vermic-
ulite platelets” that come from the natural mineral
vermiculite. Claim 1 of the ’926 patent—the only inde-
pendent claim at issue—recites the following:
1. A multilayer laminate for use as a flame barrier
layer for an aircraft comprising in order (i) a poly-
meric film layer capable of withstanding a temper-
ature of at least 200 C for at least 10 min[;]
(ii) an adhesive layer having an areal
weight of from 2 to 40 gsm capable of
activation at a temperature of from 75
to 200 degrees C[;] and
(iii) an inorganic refractory layer;
wherein the inorganic refractory layer
of (iii) comprises platelets in an amount
of 100% by weight with a dry areal
weight of 15 to 50 gsm and a residual
moisture content of no greater than 10
percent by weight.
Id. col. 9 ll. 6–17 (emphasis added). The three layers com-
prising the claimed multilayer laminate are depicted in the
’926 patent in Figure 1:
E.I. DU PONT DE NEMOURS & CO. v. UNIFRAX I LLC 5
The jury found that the Combi-Film 3G11 product in-
fringes the ’926 patent and that the asserted claims were
not invalid. Unifrax moved for judgment of non-infringe-
ment and invalidity as a matter of law. The court denied
Unifrax’s motions, finding that legally sufficient evidence
supported the jury’s verdicts of infringement and no antic-
ipation or obviousness. J.A. 41–43.
A central issue in this appeal is the court’s construction
of the term in claim 1, “100% by weight.” During claim
construction proceedings, DuPont proposed that “100% by
weight” means “[t]here is no carrier material such as resin,
adhesive, cloth or paper in addition to the inorganic plate-
lets. There may be some residual dispersant arising from
incomplete drying of the platelet dispersion.” E.I. du Pont
de Nemours & Co. v. Unifrax I LLC, No. 1:14-CV-1250,
2016 WL 158031, at *5–6 (D. Del. Jan. 13, 2016) (“Claim
Construction Order”). Unifrax proposed that “100% by
weight” be given its “[p]lain meaning—no construction is
necessary.” Id. According to the district court, “the parties’
dispute boils down to whether the platelets are 100% of the
inorganic refractory layer or 100% relative to carrier mate-
rial in the inorganic refractory layer.” Id. at *6.
The district court adopted DuPont’s proposed construc-
tion. In reaching its conclusion, the district court cited the
’926 patent’s specification, which states:
The refractory layer comprises platelets. Prefera-
bly at least 85% of the layer comprises platelets,
more preferably at least 90% and most preferably
at least 95%. In some embodiments, platelets com-
prise 100% of the layer. The refractory layer may
comprise some residual dispersant arising from in-
complete drying of the platelet dispersion during
manufacture.
’926 patent col. 3 ll. 21–26. The district court stated that
“[t]he grammatical and most natural reading of this pas-
sage is that ‘[t]he refractory layer may comprise residual
6 E.I. DU PONT DE NEMOURS & CO. v. UNIFRAX I LLC
dispersant’ refers to all the embodiments mentioned in the
paragraph, including the embodiment in which platelets
comprise 100% of the layer.” Claim Construction Order,
2016 WL 158031, at *7. Therefore, the specification sup-
ported a construction of “100% by weight” permitting some
residual dispersant.
The district court also looked to the specification of the
parent ’027 patent, which it considered as intrinsic evi-
dence, that states “[i]n one embodiment of this invention,
the inorganic platelet layer contains 100% platelets, i.e.
there is no carrier material such as resin, adhesive, cloth
or paper. However, there may be some residual dispersant
arising from incomplete drying of the platelet dispersion.”
’027 patent col. 2 ll. 32–36. The district court noted that,
although the ’027 patent and the ’926 patent did not share
the disputed “100%” claim term, both patents “claim inven-
tions that comprise a layer that comprises platelets” and
the ’027 patent “illuminate[s] the meaning of ‘100%’ as it
pertains to such a layer because the “statement relates to
common subject matter.” Claim Construction Order, 2016
WL 158031, at *8. The district court concluded that the
intrinsic evidence supports the construction that “100% by
weight” platelets refers to “the quantity of platelets rela-
tive to carrier material,” which allows for residual disper-
sant in the inorganic refractory layer. Id. at *9.
The district court also considered whether during pros-
ecution of the ’926 patent, the patentees disclaimed refrac-
tory layers that contain less than 100% by weight platelets
to overcome a rejection in view of the prior art—U.S. Pa-
tent No. 6,670,291 (“Tompkins”). The examiner rejected
the application that led to the ’926 patent over Tompkins
because Tompkins taught a refractory layer with a platelet
concentration of less than 100%. Id. The patentees
amended the claim to add language reciting that the inor-
ganic refractory layer comprises platelets in the amount of
“100% by weight.” Id. According to the district court,
DuPont did not dispute that this resulted in disclaimer of
E.I. DU PONT DE NEMOURS & CO. v. UNIFRAX I LLC 7
at least “embodiments comprising an inorganic refractory
layer containing platelets in an amount less than 100% by
weight.” Id.
The district court further considered whether the pa-
tentees disclaimed inorganic refractory layers that con-
tained residual dispersant. Noting that the amended
language recited “platelets in the amount of 100% by
weight . . . and a residual moisture content,” the district
court found that the patentees had not disclaimed “refrac-
tory layers that contain anything at all other than plate-
lets” and that the disclaimer had no effect on the
permissibility of non-carrier materials such as residual dis-
persants or moisture in the refractory layer. Id. In the
district court’s view, the disclaimer limited the scope of the
claimed layers to those containing no carrier material such
as a resin or an adhesive. Id.
III. The Accused Product
Unifrax produces the accused Combi-Film 3G11 prod-
uct. The “vermiculite coating” layer shown in the figure
below 1 is the layer that DuPont contends meets the claimed
“inorganic refractory layer” limitation in this appeal.
1 Despite the visible “Unifrax Confidential” designa-
tion, this figure appears in DuPont’s non-confidential re-
sponse brief.
8 E.I. DU PONT DE NEMOURS & CO. v. UNIFRAX I LLC
Appellee Br. 10; J.A. 8033. The refractory layer in Combi-
Film 3G11 consists of an HTS-SE vermiculite dispersion
containing vermiculite, a material known as DEHESIVE
480, tetrasodium pyrophosphate, and water.
DISCUSSION
We review the district court’s ultimate determination
on claim construction de novo, while any underlying factual
findings related to extrinsic evidence are reviewed for clear
error. CardSoft, LLC v. VeriFone, Inc., 807 F.3d 1346,
1348, 1349–50 (Fed. Cir. 2015).
Review of the district court’s denial of judgment as a
matter of law is governed by the law of the regional circuit,
here the Third Circuit. See Transocean Offshore Deepwater
Drilling, Inc. v. Maersk Drilling USA, Inc., 699 F.3d 1340,
1346–47 (Fed. Cir. 2012). The Third Circuit reviews de
novo a district court’s ruling on a motion for judgment as
E.I. DU PONT DE NEMOURS & CO. v. UNIFRAX I LLC 9
matter of law. Intellectual Ventures I LLC v. Motorola Mo-
bility LLC, 870 F.3d 1320, 1324 (Fed. Cir. 2017); McKenna
v. City of Philadelphia, 582 F.3d 447, 460 (3d Cir. 2009).
Judgment as matter of law is appropriate if “the court
finds that a reasonable jury would not have a legally suffi-
cient evidentiary basis to find for [a] party.” Fed. R. Civ.
P. 50(a)(1). Judgment as a matter of law is “sparingly in-
voked” and “granted only if, viewing the evidence in the
light most favorable to the nonmovant and giving it the ad-
vantage of every fair and reasonable inference, there is in-
sufficient evidence from which a jury reasonably could
find” for the nonmovant. Marra v. Phila. Hous. Auth., 497
F.3d 286, 300 (3d Cir. 2007) (internal quotation marks
omitted). “The question is not whether there is literally no
evidence supporting the party against whom the motion is
directed but whether there is evidence upon which the jury
could properly find a verdict for that party.” Becton, Dick-
inson & Co. v. Tyco Healthcare Grp., LP, 616 F.3d 1249,
1253 (Fed. Cir. 2010) (quoting Lightning Lube, Inc. v. Witco
Corp., 4 F.3d 1153, 1166 (3d Cir. 1993)).
Infringement is a question of fact, reviewed for sub-
stantial evidence when tried to a jury. ACCO Brands, Inc.
v. ABA Locks Mfrs. Co., 501 F.3d 1307, 1311 (Fed. Cir.
2007). Similarly, anticipation under 35 U.S.C. § 102 is a
question of fact, reviewed for substantial evidence when
tried to a jury. TI Grp. Auto. Sys. (N. Am.), Inc. v. VDO N.
Am., L.L.C., 375 F.3d 1126, 1133 (Fed. Cir. 2004). “Prior-
ity, conception, and reduction to practice are questions of
law which are based on subsidiary factual findings.”
Cooper v. Goldfarb, 154 F.3d 1321, 1327 (Fed. Cir. 1998).
We have treated the question of whether inventor testi-
mony asserting priority is sufficiently corroborated as a
question of fact. See NFC Tech., LLC v. Matal, 871 F.3d
1367, 1371 (Fed. Cir. 2017) (citing Fleming v. Escort Inc.,
774 F.3d 1371, 1377 (Fed. Cir. 2014)).
10 E.I. DU PONT DE NEMOURS & CO. v. UNIFRAX I LLC
I. Claim Construction
We review the district court’s ultimate determination
on claim construction de novo. CardSoft, 807 F.3d at 1349–
50. The parties dispute whether the district court correctly
construed the claim term “100% by weight.” The first step
in the patent infringement analysis requires the court to
construe the scope and meaning of the asserted claims. See
Markman v. Westview Instruments, Inc., 517 U.S. 370,
372–74 (1996). The purpose of claim construction is to give
meaning to the claim terms according to how a person of
ordinary skill in the art would have understood them at the
time of the invention in light of the entire patent, including
the claims in which the terms appear and the specification.
Phillips v. AWH Corp., 415 F.3d 1303, 1312–14 (Fed. Cir.
2005) (en banc). “We cannot look at the ordinary meaning
of [a] term . . . in a vacuum” but must consider “the context
of the written description and the prosecution history.”
Medrad, Inc. v. MRI Devices Corp., 401 F.3d 1313, 1319
(Fed. Cir. 2005). “When the specification ‘makes clear that
the invention does not include a particular feature, that
feature is deemed to be outside the reach of the claims of
the patent, even though the language of the claims, read
without reference to the specification, might be considered
broad enough to encompass the feature in question.’” Mi-
crosoft Corp. v. Multi-Tech Sys., Inc., 357 F.3d 1340, 1347
(Fed. Cir. 2004) (quoting SciMed Life Sys., Inc. v. Advanced
Cardiovascular Sys., Inc., 242 F.3d 1337, 1341 (Fed. Cir.
2001)).
Although the court may consider extrinsic evidence,
“[i]t is well-settled that, in interpreting an asserted claim,
the court should look first to the intrinsic evidence of rec-
ord.” Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576,
1582 (Fed. Cir. 1996). We have designated the prosecution
history as part of the intrinsic evidence, including “the
prior art cited during the examination of the patent.” Phil-
lips, 415 F.3d at 1317; Powell v. Home Depot U.S.A., Inc.,
663 F.3d 1221, 1230–31 (Fed. Cir. 2011). The prosecution
E.I. DU PONT DE NEMOURS & CO. v. UNIFRAX I LLC 11
history “contains the entire record of the proceedings in the
Patent Office from the first application papers to the issued
patent.” Autogiro Co. of Am. v. United States, 384 F.2d 391,
398 (Ct. Cl. 1967); see also Phillips, 415 F.3d at 1317.
Unifrax argues that the “100% by weight” term does
not allow for any amount of organic additives in the refrac-
tory layer. According to Unifrax, “‘100%’ means one hun-
dred percent.” Appellant Br. 35. We must consider
whether the context of the entire patent and other intrinsic
evidence supports such an interpretation. We hold that it
does not.
We begin our analysis with the claim language itself.
Claim 1 of the ’926 patent recites that “the inorganic re-
fractory layer of (iii) comprises platelets in an amount of
100% by weight with a dry areal weight of 15 to 50 gsm and
a residual moisture content of no greater than 10 percent
by weight.” ’926 patent col. 9 ll. 14–17. That claim 1 recites
a residual moisture content of up to “[10%] by weight” in
addition to “100% by weight” platelets in the refractory
layer undercuts Unifrax’s plain meaning argument that
“‘100%’ means one hundred percent.” Unifrax’s position
would require that the term “100% by weight” be consid-
ered alone, without reference to the surrounding claim lan-
guage. The claim’s reference to both “100% by weight”
platelets and 10% residual moisture, however, supports the
conclusion that “100% by weight” is relative to carrier ma-
terial. It would be nonsensical if the total percentage of
components comprising the inorganic refractory layer ex-
ceeded 100%. As the district court noted, this claim lan-
guage does not suggest that “100%” excludes all refractory
layers containing “anything at all other than platelets”
from the claim scope. Claim Construction Order, 2016 WL
158031, at *9.
We next look at the specification. The specification pro-
vides that “[t]he refractory layer comprises platelets. Pref-
erably at least 85% of the layer comprises platelets, more
12 E.I. DU PONT DE NEMOURS & CO. v. UNIFRAX I LLC
preferably at least 90% and most preferably at least 95%.
In some embodiments, platelets comprise 100% of the
layer. The refractory layer may comprise some residual
dispersant.” ’926 patent col. 3 ll. 21–25. This language
supports the district court’s conclusion that the disclosed
embodiments, including the 100% platelet embodiment, all
allow for some amount of residual dispersant. Like the lan-
guage of claim 1, this passage further supports that “100%
by weight” is relative to carrier material in the refractory
layer.
Unifrax contends that all twenty-four examples of the
refractory layer in the laminates shown in the specification
have 100% by weight inorganic platelets with no residual
dispersant. Appellant Br. 5. Indeed, the specification
states that all laminate examples are based on the use of a
single commercial vermiculite product known as Micro-
Lite 963 for the refractory layer that has 0% organic mate-
rial. ’926 patent col. 4 ll. 62–67; J.A. 7617–20. But the ’926
patent also lists other “suitable materials” (e.g., MicroLite
HTS-XE) that contain a residual dispersant, and thus, less
than 100% inorganic material, for the refractory layer. ’926
patent col. 3 ll. 47–50; J.A. 7617–26 (stating that MicroLite
HTS-XE may contain organic additives).
Unifrax also argues that the district court erred by
treating the ’027 patent’s specification as intrinsic evidence
in construing “100% by weight.” We disagree. This court’s
precedent supports treating the specification of the ’027 pa-
tent as intrinsic evidence in construing claims in the ’926
patent, which issued from a continuation-in-part of the ap-
plication for the ’027 patent, because “the subject matter is
common to the continuation-in-part application.” Wang
Labs., Inc. v. Am. Online, Inc., 197 F.3d 1377, 1384 (Fed.
Cir. 1999) (applying statements from prosecution of a par-
ent application where subject matter was common to the
continuation-in-part application); see also Jonsson v. Stan-
ley Works, 903 F.2d 812, 818 (Fed. Cir. 1990) (affirming
claim construction relying on “arguments and remarks”
E.I. DU PONT DE NEMOURS & CO. v. UNIFRAX I LLC 13
made during the prosecution of a parent application for
claim terms in a patent resulting from a continuation-in-
part application despite recognizing the claims used differ-
ent language).
The district court’s construction of “100% by weight”
comes directly from language in the parent ’027 patent and
its application:
In one embodiment of this invention, the inor-
ganic platelet layer contains 100% platelets i.e.
there is no carrier material such as resin, adhesive,
cloth or paper. However, there may be some resid-
ual dispersant arising from incomplete drying of
the platelet dispersion.
’027 patent col. 2 ll. 32–36. We agree with the district court
that this passage relates to common subject matter and in-
forms the meaning of the “100% by weight” claim term as
it is used in the ’926 patent by clarifying what is not in-
cluded in the refractory layer—a carrier material such as
resin, adhesive, cloth, or paper.
Unifrax cites Advanced Cardiovascular Systems, Inc. v.
Medtronic, Inc., 265 F.3d 1294, 1305–06 (Fed. Cir. 2001),
to assert that considering the ’027 patent specification was
improper. Advanced Cardiovascular provides one example
of circumstances when it is plainly appropriate to treat a
parent application as intrinsic evidence: when considering
two related patents with identical claim terms. Id. (“The
prosecution history of a related patent can be relevant if,
for example, it addresses a limitation in common with the
patent in suit.”). We do not read Advanced Cardiovascular
to create a strict requirement that to consider a parent pa-
tent as intrinsic evidence, the exact claim term at issue in
the child patent must appear in the parent patent’s claims.
Id. In Advanced Cardiovascular, we declined to import a
limitation into the child patent claims based on the prose-
cution history of the parent application where “[t]he pa-
tentee’s whole point in filing the [child application] was to
14 E.I. DU PONT DE NEMOURS & CO. v. UNIFRAX I LLC
secure broader claims” by removing a claim term. Id.
Thus, Advanced Cardiovascular concerned the “absence of
a claim term[,]” not merely “no common claim terms in dis-
pute.” Id. That is not the case here.
Other cases set forth additional circumstances where
familial patents inform the construction of a claim term
and are appropriately treated as intrinsic evidence. When
a parent application includes statements involving “com-
mon subject matter” with the terms at issue, those state-
ments are relevant to construction of the terms in the child
patent. See Wang Labs, 197 F.3d at 1384; Jonsson 903 F.2d
at 818; see also, e.g., Ormco Corp. v. Align Tech., Inc., 498
F.3d 1307, 1314 (Fed. Cir. 2007). Such is the case in this
action.
The ’027 and ’926 patents have a familial relationship:
the ’926 patent issued from a continuation-in-part of the
application that issued as the ’027 patent. See ’926 patent
col. 1 ll. 5–8; id., Related U.S. Application Data. Accord-
ingly, as a continuation-in-part, the ’926 patent “disclos[es]
all or a substantial part of the subject-matter of the prior
application,” i.e., the application that led to the ’027 patent.
U.S. Water Servs., Inc. v. Novozymes A/S, 843 F.3d 1345,
1348 n.1 (Fed. Cir. 2016). In addition to the familial rela-
tionship, the application that led to the ’027 patent is listed
on the face of the ’926 patent as a prior art reference cited
during prosecution. ’926 patent, References Cited.
Both patents claim composite laminates that are used
as flame barriers comprised of a polymeric film layer and
an inorganic refractory layer that itself comprises plate-
lets. Both specifications disclose 100% platelet refractory
layer embodiments that also allow for “residual dispersant”
in the 100% platelet layer. Given the familial relationship,
citation during prosecution, and common subject matter,
the district court’s treatment of the ’027 patent as intrinsic
E.I. DU PONT DE NEMOURS & CO. v. UNIFRAX I LLC 15
evidence 2 was consistent with our precedent. See Wang
Labs, 197 F.3d at 1384; Powell, 663 F.3d at 1230–31.
We also find it persuasive that the patentees did not
delete the definition of “100% platelet” from the ’027 patent
specification and substantially copy the remaining lan-
guage into the ’926 patent specification. Had they done so,
one could reasonably infer that they intended to change the
meaning of “100%” in the ’926 patent specification. But as
the district court correctly observed, the “patentees wrote
a new specification for the ’926 patent, drawing from the
’027 patent more in substance than in language.” Claim
Construction Order, 2016 WL 158031, at *8. The patentees
demonstrated in the ’926 patent the same understanding
of 100% that we set forth here; it is relative to certain other
materials in an embodiment where “platelets comprise
100% of the layer” while also comprising “residual disper-
sant.” The revised language of the ’926 patent omits only
the clarification that the 100% platelet layer contains “no
carrier material.” The ’027 patent explicitly clarified that
a dispersant and a carrier are distinct.
The language in the ’926 patent specification is con-
sistent with the understanding of the 100% platelet layer
described in the ’027 patent specification. As such, there is
no reason to infer that the patentees intended to change
2 The dissent implies that statements in a parent pa-
tent’s specification may somehow have less relevance than
“certain statements made during the prosecution history”
for the claim construction of a child patent. Dissent Op. 9–
10. The prosecution history of the parent patent, here the
’027 patent, however, encompasses its “first application pa-
pers” to the “issued patent,” including the specification.
Autogiro Co. of Am., 384 F.2d at 398. Thus, statements in
the issued ’027 patent have no less relevance than other
statements in its prosecution history in construing the
claims of the child patent, here the ’926 patent.
16 E.I. DU PONT DE NEMOURS & CO. v. UNIFRAX I LLC
the meaning of the term or that a person of ordinary skill
in the art would understand “100%” differently in the con-
text of the ’926 patent. Thus, the ’027 patent specification
illuminates the meaning of “100% by weight” to a person of
ordinary skill in the art, who would understand that the
term is used in the same way in the ’926 patent, relative to
carrier material, and that while the claimed “100% by
weight” platelet refractory layer may comprise residual
dispersant, “there is no carrier material.”
Next, we must consider the ’926 patent’s prosecution
history to determine whether the patentees “limited the in-
vention in the course of prosecution, making the claim
scope narrower than it would otherwise be.” Phillips, 415
F.3d at 1317. Unifrax argues that the patentees disclaimed
a refractory layer with any other material at all, including
residual dispersants, to overcome the rejection based on
Tompkins. DuPont does not dispute that the patentees dis-
claimed refractory layers comprising less than “100% by
weight” platelets but contends that the disclaimer did not
exclude refractory layers containing residual dispersant
from the scope of the claim. J.A. 25. The question is
whether, to get around Tompkins, the patentees’ dis-
claimer went so far as to also exclude embodiments with a
refractory layer containing any non-carrier materials such
as a residual dispersant. See Chimie v. PPG Indus.,
Inc., 402 F.3d 1371, 1384 (Fed. Cir. 2005). It did not.
During prosecution of the application for the ’926 pa-
tent, DuPont argued that the Tompkins reference cited by
the examiner disclosed a laminate with a 70% by weight
platelet concentration secured to a fiber carrier (i.e., the
“second layer”). J.A. 373; J.A. 525 col. 7 ll. 6–9; J.A. 528
col. 14 ll. 20–24. The patentees amended the claim lan-
guage and explained that they had found a solution with a
platelet concentration of 100% platelets, not requiring a
carrier, while also clarifying that the refractory layer re-
quired “a defined areal weight and a defined residual mois-
ture content.” J.A. 372–73 (emphasis added). The
E.I. DU PONT DE NEMOURS & CO. v. UNIFRAX I LLC 17
patentees overcame the deficiency in Tompkins where
more platelets made the refractory layer too brittle or too
heavy. Id. In adding a platelet percentage term to the
claim language to overcome the rejection based on the
platelet percentage disclosed in Tompkins, the ’926 patent-
ees understood the claimed percentage as relative to car-
rier material in the same way that Tompkins used the
term. That the ’926 patent specification identifies Tomp-
kins as one of only two references in the Background of the
Invention section further suggests that the patentees had
the same understanding of the platelet percentage terms.
See ’926 patent col. 1 l. 22. Thus, the patentees’ amend-
ment does not disclaim embodiments with a refractory
layer containing moisture from “dispersant arising from in-
complete drying of the platelet dispersion,” i.e., non-carrier
materials. Id. col. 3 ll. 21–26.
The dissent concludes that “100% by weight” permits
residual moisture but no other ingredients (such as a dis-
persant). Dissent Op. 7. This conclusion contradicts the
undisputed fact that the accused Unifrax vermiculite layer
contains a dispersant, tetrasodium pyrophosphate
(“TSPP”). Appellant Br. 15 n.2. (“The specific function of
TSPP is to be a dispersant.”) Unifrax has never contended
the presence of TSPP avoids infringement, even under the
plain meaning of “100% by weight.” See id. at 46–47 (argu-
ing instead that Combi-Film 3G11 does not infringe under
the plain meaning of “100% by weight” because of the pres-
ence of an organosilicon material, polydimethylsiloxane);
J.A. 6016 (“Q. Now, you mentioned that there are the two
additives in the Unifrax vermiculite layer, TSPP and
dehesive 480. Is there any dispute about what TSPP is? A.
No, sir. Q. Okay. Is that a dispersant? A. It is a dispersant,
sir.”). Thus, Unifrax’s own arguments oppose the dissent’s
conclusion.
Further, the history of this case and statements made
by Unifrax during claim construction belie the dissent’s as-
sertions that “[t]here is no ambiguity in [the claim]
18 E.I. DU PONT DE NEMOURS & CO. v. UNIFRAX I LLC
language” and “[t]here is perhaps no clearer or simpler way
the patentee could have conveyed such a requirement.”
Dissent Op. 2. At claim construction, Unifrax argued that
the claim language was indefinite because “[n]othing in the
specification or the claims informs one how the inorganic
refractory layer may contain 100% by weight platelets and
also include additional amounts of material to exceed 100%
by weight . . . to accommodate some percentage of other
content.” J.A. 797–98. Thus, Unifrax previously argued
that the claim language contained unresolvable ambigui-
ties, contrary to the dissent’s assertions.
We discern no error in the district court’s construction
of “100% by weight” to mean “[t]here is no carrier material
such as resin, adhesive, cloth, or paper in addition to the
inorganic platelets. There may be some residual disper-
sant arising from incomplete drying of the platelet disper-
sion.”
II. Infringement
We review the jury’s infringement verdict for substan-
tial evidence. ACCO Brands, 501 F.3d at 1311. An in-
fringement analysis requires a comparison of the claims to
the accused device. Mas-Hamilton Grp. v. LaGard, Inc.,
156 F.3d 1206, 1211 (Fed. Cir. 1998). For literal infringe-
ment, the patentee must prove that the accused product
meets all the limitations of the asserted claims; if even one
limitation is not met, there is no literal infringement. Id.
Unifrax argues that the district court erred in denying
judgment of non-infringement as a matter of law because
DuPont did not prove that Combi-Film 3G11 met the
“platelets in an amount of 100% by weight” claim limitation
by showing the absence of a carrier material such as an ad-
hesive or resin in the refractory layer. Unifrax makes two
alternative non-infringement arguments. First, Unifrax
argues that the 5% polydimethylsiloxane (“PDMS”) in
Combi-Film 3G11 functions as an adhesive. Second,
Unifrax argues that silane—another material present in
E.I. DU PONT DE NEMOURS & CO. v. UNIFRAX I LLC 19
Combi-Film 3G11—is a carrier material in the refractory
layer.
Unifrax’s non-infringement arguments rely on the
premises that the DEHESIVE 480 material (which is com-
prised of PDMS) used in Combi-Film 3G11 is a carrier, or
alternatively, that silane is both included in the refractory
layer and is a carrier. If either DEHESIVE 480 or silane
constitutes a carrier present in the refractory layer, the ac-
cused Combi-Film 3G11 does not meet all the limitations
of the asserted claims, and there is no literal infringement.
See Mas-Hamilton Grp., 156 F.3d at 1211. We must deter-
mine whether substantial evidence supports a jury finding
that DEHESIVE 480 is not a carrier and that silane is ei-
ther not in the refractory layer or is not a carrier.
A. DEHESIVE 480
We agree with the district court that substantial evi-
dence supports the jury’s finding that DEHESIVE 480 is
not a carrier. Unifrax’s expert, Dr. Nosker, testified that a
carrier is something that helps the platelets stick together
in the refractory layer. J.A. 6667. DuPont’s expert, Dr.
Morgan, agreed. J.A. 6080–81. The question therefore is
whether DEHESIVE 480 helps platelets stick together and
thus, is a carrier.
Unifrax points to trial testimony in support of its as-
sertion that silicones like PDMS can serve different func-
tions in different applications and environments depending
on how they are formulated, including functioning as an
adhesive. The product data sheet from the manufacturer
of DEHESIVE 480 refers to it repeatedly as a “release coat-
ing.” J.A. 8109–11. Dr. Haber, another Unifrax expert,
admitted that the DEHESIVE 480 product data sheet
states that it has anti-adhesive qualities. E.g., J.A. 6882.
Dr. Nosker also admitted that the PDMS in Microlite HTS-
SE is sold as a dispersant, i.e., not a carrier or binder. J.A.
6640–41.
20 E.I. DU PONT DE NEMOURS & CO. v. UNIFRAX I LLC
Both the DEHESIVE 480 product data sheet and
DuPont’s expert testimony show that a “crosslinker” could
be added to DEHESIVE 480 to improve adhesion, which
could make it then act as a “carrier.” J.A. 8109–11; J.A.
6096–98. But it is undisputed that no crosslinker is added
to the accused Unifrax products. Thus, the jury’s conclu-
sion that DEHESIVE 480 is not a carrier is supported by
substantial evidence.
B. Silane
Substantial evidence also supports that silane is not in
the refractory layer, and that silane is not a carrier.
DuPont’s expert testified that the vermiculite plates pre-
vent silane from impregnating the refractory layer.
J.A. 6036–37. In Unifrax’s schematic of the accused prod-
uct, Combi-Film 3G11 (shown above), silane is shown as a
separate layer from the vermiculite layer. J.A. 8033. An-
other Unifrax document similarly shows silane separately
from the vermiculite layer, referring to it as the “3g coat-
ing.” J.A. 8102; see J.A. 8103. In an internal email,
Unifrax’s manager of the Combi-Film product team called
silane an “overlayer coating” and “not the binder.”
J.A. 6467–68; J.A. 8482. There was also testimony that
silane is not added until after the vermiculite is dry, and
thus, it would not be part of the refractory layer. Addition-
ally, Unifrax’s expert, Dr. Nosker, admitted that he had no
direct evidence that silane impregnates the vermiculite
layer. Accordingly, there was substantial evidence to sup-
port the jury’s conclusion that silane was not part of the
refractory layer.
DuPont’s expert also testified that even if silane did im-
pregnate the refractory layer, it would not be a carrier.
J.A. 6036–37. This testimony is supported by the above-
referenced email from Unifrax’s Combi-Film team man-
ager, stating that silane was “not the binder” in Combi-
Film 3G11. Consistent with the manufacturer’s product
data sheet for silane, Unifrax’s expert testified that it could
E.I. DU PONT DE NEMOURS & CO. v. UNIFRAX I LLC 21
be used as an additive to improve binding between an or-
ganic binder and an inorganic binder. Unifrax’s expert’s
argument that silane functioned as a binder or carrier in
Combi-Film 3G11 assumed that the PDMS in DEHESIVE
480 was itself the organic binder. As discussed above,
DuPont presented substantial evidence to support the
jury’s conclusion that the PDMS in Combi-Film 3G11 is not
a binder. As such, we conclude that substantial evidence
supports the jury’s conclusion that silane is not a carrier in
Combi-Film 3G11.
Accordingly, because the jury’s infringement verdict is
supported by legally sufficient evidence, we affirm the dis-
trict court’s denial of Unifrax’s motion for judgment of non-
infringement as a matter of law.
III. Invalidity
A. Mormont
We review the jury’s verdict on anticipation for sub-
stantial evidence. TI Grp. Auto. Sys, 375 F.3d at 1133.
Unifrax asserts that U.S. Patent Application Publication
No. 2003/0170418 (“Mormont”) anticipates the asserted
claims of the ’926 patent. To prove anticipation, Unifrax
must show that Mormont teaches each limitation of the as-
serted claims. See ClearValue, Inc. v. Pearl River Polymers,
Inc., 668 F.3d 1340, 1344 (Fed. Cir. 2012). The dispute over
anticipation by Mormont turns on whether, despite de-
scribing methyl silicone as a resin, Mormont discloses a sil-
icon material in the refractory layer that is essentially the
same as the PDMS in DEHESIVE 480 in the infringing
Combi-Film 3G11 product.
Mormont discloses a fireproofing barrier laminate ma-
terial for aircraft with a polymeric film, adhesive, and a
“mica paper” layer. J.A. 8726–30. Unifrax points to Exam-
ple 2 in the Mormont reference that discloses mica paper
as a refractory layer consisting of platelets reinforced by a
methyl silicone material such as the “resin Wacker K.”
22 E.I. DU PONT DE NEMOURS & CO. v. UNIFRAX I LLC
J.A. 8729. Wacker K (also referred to in the briefing and
record as “Silres K”) is manufactured by Wacker, the same
company that produces the DEHESIVE 480 material com-
prised of PDMS in Combi-Film 3G11. J.A. 8729. Unifrax
argues that the methyl silicone in Wacker K is the same as
the PDMS in DEHESIVE 480 in the refractory layer in
Combi-Film 3G11. Unifrax points to its expert’s testimony
detailing how Mormont disclosed each limitation of claim 1
of the ’926 patent. Unifrax asserts that DuPont failed to
rebut that testimony by not putting up its own expert on
anticipation by Mormont.
The Wacker K manufacturer’s product data sheet re-
peatedly refers to Wacker K as a “methyl silicon resin” and
as an ideal “binder” with “high binding strength.”
J.A. 8218. Unifrax’s expert opined that the methyl silicone
in Mormont and the PDMS in Combi-Film 3G11 were the
same, yet he also admitted that (1) there are different types
of silicones that serve different functions; (2) that Wacker
K serves as a resin in Mormont and is a different chemical
than the DEHESIVE 480 in Combi-Film 3G11; and
(3) Mormont requires 5% to 25% binder or resin.
J.A. 6878–84. Unifrax’s expert also conceded that silicone
can function as a release agent and that the Wacker data
sheets distinguish between silicon release agents and sili-
cone resins. In contrast to Wacker K, the product data
sheet for DEHESIVE 480 refers to it as a release agent
with anti-adhesive, i.e., non-binding, properties. Although
DuPont did not call an expert to testify as to the differences
between Mormont and the asserted claims, there was sub-
stantial documentary evidence and cross-examination tes-
timony from Unifrax’s expert for the jury to conclude that
the silicones in Combi-Film 3G11 and Mormont were dis-
tinct and that DEHESIVE 480 was not a resin or carrier.
Thus, substantial evidence supports the jury verdict that
Mormont does not anticipate the asserted claims of the ’926
patent.
E.I. DU PONT DE NEMOURS & CO. v. UNIFRAX I LLC 23
B. Antedating 3G7
We review subsidiary factual findings related to prior-
ity, conception, and reduction to practice, including
whether the evidence sufficiently corroborates inventor
testimony, for substantial evidence. See NFC Tech., LLC,
871 F.3d at 1371; Singh v. Brake, 317 F.3d 1334, 1340 (Fed.
Cir. 2003). Unifrax contends that its FyreWrap® Combi-
Film 3G7 (“3G7”) product—a predecessor flame barrier
product to Combi-Film 3G11—anticipates the asserted
claims of the ’926 patent. DuPont does not dispute that
3G7 describes each limitation of claim 1 and was known
and in public use on May 17, 2011, before the December
2011 filing date of the application that led to the ’926 pa-
tent. DuPont, however, argues that the inventors con-
ceived of the invention of the ’926 patent and reduced it to
practice prior to 3G7’s May 2011 public use date. The ques-
tion is one of priority of invention. We consider whether
DuPont presented substantial evidence to support the
jury’s implicit finding that the asserted claims of the ’926
patent antedated the public use of 3G7.
“[P]riority of invention ‘goes to the first party to reduce
an invention to practice unless the other party can show
that it was the first to conceive the invention and that it
exercised reasonable diligence in later reducing that inven-
tion to practice.’” Mahurkar, 79 F.3d at 1577 (quoting Price
v. Symsek, 988 F.2d 1187, 1190 (Fed. Cir. 1993)). Concep-
tion requires formation of a “definite and permanent idea
of the complete and operative invention” in the mind of the
inventor. Id. To establish an actual reduction to practice,
as opposed to the constructive reduction to practice that oc-
curs when a patent application is filed, “the inventor must
prove that: (1) he constructed an embodiment or performed
a process that met all the limitations [of the claim]; and
(2) he determined that the invention would work for its in-
tended purpose.” Cooper, 154 F.3d at 1327.
24 E.I. DU PONT DE NEMOURS & CO. v. UNIFRAX I LLC
Dr. Richardson testified that he and Dr. Kawka—the
named inventors of the ’926 patent—conceived of a “lami-
nate with this combination of a vermiculite layer, adhesive
layer, and polymer film layer” in November or December
2009 while working at DuPont. J.A. 5675. Yet an inven-
tor’s testimony alone is insufficient to prove conception;
some corroborating evidence is required. See Price, 988
F.2d at 1194. An inventor’s testimony on conception can be
corroborated through several pieces of evidence, even
though no one piece of evidence independently proves con-
ception, and even circumstantial evidence, so long as the
evidence supports that the “inventor’s story is credible.”
NFC Tech, 871 F.3d at 1372. “There is no particular for-
mula” required for corroboration, and instead, a “rule of
reason” analysis applies to the evaluation of all pertinent
evidence. Singh, 317 F.3d at 1341. The same requirement
for evidence that corroborates inventor testimony on con-
ception also applies to the reduction to practice determina-
tion. See Cooper, 154 F.3d at 1330; see also Holmwood v.
Sugavanam, 948 F.2d 1236, 1238–39 (Fed. Cir. 1991) (stat-
ing that the court must apply a “‘rule of reason’ standard”
and evaluate all pertinent evidence “when weighing the
credibility of an inventor’s story” as to reduction to prac-
tice).
In this case, the question of entitlement to a priority
date before the May 2011 public use date for the ’926 patent
turns on whether DuPont offered corroborating evidence
that, when considered in its totality and applying a “rule of
reason” analysis, supports the credibility of Dr. Richardson
and Dr. Kawka’s story of prior invention. See NFC Tech,
871 F.3d at 1372. We conclude that it does.
In 2008 and 2009, Dr. Richardson was working on de-
veloping a new refractory layer for composite laminates.
J.A. 8276–77. Dr. Richardson’s work led to the ’027 patent
that disclosed a refractory layer comprised of vermiculite
platelets, including MicroLite 963 and MicroLite HTS-XE.
See e.g., ’027 patent col. 2 l. 50–col. 3 l. 6, col. 8 ll. 5–7. As
E.I. DU PONT DE NEMOURS & CO. v. UNIFRAX I LLC 25
noted above, the ’027 patent claims a polymeric film layer
and an inorganic refractory layer but not the adhesive
layer claimed by the ’926 patent. It is against this back-
drop that he began collaborating with Dr. Kawka on work
that led to the ’926 patent.
Emails from December 2009 reflect Dr. Richardson and
Dr. Kawka discussing plans for a new three-layer DuPont
composite film including a polymeric film layer, a vermicu-
lite layer, and a new adhesive layer and their efforts to
begin developing and testing the three-layer composite
laminate. Testimony and evidence also showed that
DuPont began developing and testing the three-layer lam-
inate shortly thereafter, culminating in a successful
burnthrough test at a Federal Aviation Administration
(“FAA”) facility in August 2010.
We next consider the specific testimony and record ev-
idence as to each laminate layer and the claimed limita-
tions in turn. As to the film layer, both inventors testified
that the polymeric film layer capable of withstanding at
least 200° C for 10 minutes claimed in the ’926 patent was
based on known attributes of materials, such as “PEEK”
and “Tedlar,” used by DuPont in 2009 and 2010. Product
data sheets for those materials and documents showing the
use of those materials in August 2010 FAA testing corrob-
orated this testimony. Internal DuPont documents reflect
that DuPont used PEEK in the August 2010 FAA testing.
As to the adhesive layer, Dr. Kawka testified that in
2009, he conceived of an adhesive layer between the poly-
meric film layer and refractory layer with the weight range
of 2 to 40 gsm and an activation temperature range from
75 to 200° C and that such an adhesive layer was used in
the August 2010 FAA testing. Documentary evidence, in-
cluding a 2009 email sent by Dr. Kawka describing an ad-
hesive layer with “0.3 osy,” or approximately 10 gsm,
corroborated Dr. Kawka’s testimony. J.A. 8291. Other doc-
umentary evidence showed DuPont developed and tested
26 E.I. DU PONT DE NEMOURS & CO. v. UNIFRAX I LLC
laminates with adhesive weights between 5 gsm and 30
gsm in 2010, including in the August 2010 FAA testing.
Evidence also showed adhesive activation temperature
ranges between 75 and 200° C, including a May 2010 email
to a contractor disclosing an activation temperature of 200°
C; another May 2010 email identifying activation temper-
atures across the entire claimed range; and a July 2010
email showing that the activation temperature for the ad-
hesive to be used in the August 2010 FAA test was within
the claimed range.
As to the refractory layer, Dr. Richardson testified that
he began using 100% vermiculite films in the laminates in
2008 and successfully tested vermiculite dispersions of Mi-
croLite 963 and MicroLite HTS-XE by 2009. Dr. Richard-
son also testified that he conceived of the weight range of
15 to 50 gsm for the inorganic refractory layer in 2009 and
began trying to get the moisture content below 10%. Dr.
Kawka testified that DuPont’s vermiculite films had a re-
sidual moisture content of 3% to 5%.
Dr. Richardson’s testimony about his work with Micro-
Lite 963 and MicroLite HTS-XE was corroborated by docu-
ments related to his work on the ’027 patent and a 2010
presentation that showed successful testing of a vermicu-
lite refractory layer. Dr. Richardson’s testimony regarding
the claimed weight range was corroborated by DuPont
emails, progress reports, and an internal presentation be-
tween October 2009 and February 2010 showing the devel-
opment and testing of laminates with the refractory layer
at various weights between 17 and 53 gsm. Evidence
showed that the August 2010 FAA testing used a vermicu-
lite layer of 37.2 gsm. An October 2009 progress report re-
flects that Dr. Richardson and Dr. Kawka were working
together on a laminate with a refractory layer using ver-
miculite films with the claimed 10% or less residual mois-
ture content.
E.I. DU PONT DE NEMOURS & CO. v. UNIFRAX I LLC 27
Unifrax asserts that independent of the inventors’ tes-
timony, the documentary evidence does not disclose the
conception or reduction to practice of the exact material at-
tribute ranges (e.g., “a dry areal weight of 15 to 50 gsm”)
claimed in the ’926 patent for the laminate components.
But our case law does not require that evidence have a
source independent of the inventors on every aspect of con-
ception and reduction to practice; “such a standard is the
antithesis of the rule of reason.” Cooper, 154 F.3d at 1331
(quoting Knorr v. Pearson, 671 F.2d 1368, 1374 (CCPA
1982)). Here, the law requires only that the corroborative
evidence, including circumstantial evidence, support the
credibility of the inventors’ story. NFC Tech, 871 F.3d at
1372.
Notably, Unifrax does not point to any evidence that
contradicts or calls the credibility of the inventors’ testi-
mony into question. Applying the “rule of reason” analysis,
we conclude that the corroborative evidence supports the
credibility of Dr. Richardson and Dr. Kawka’s story.
The documents from 2009 and 2010 related to the re-
fractory layer support Dr. Richardson’s testimony. For ex-
ample, these documents show refractory layer weights
between 17 and 53 gsm and support his testimony that he
conceived of the claimed 15 to 50 gsm weight range in 2009,
and at least before May 2011. Even though no single inde-
pendent document precisely shows the entire claimed
range, these documents sufficiently support the credibility
of his account. See Fleming v. Escort Inc., 774 F.3d 1371,
1377 (Fed. Cir. 2014) (finding sufficient corroboration alt-
hough “none of the corroborating evidence constitute[d] de-
finitive proof of [the inventor’s] account or disclose[d] each
claim limitation as written” because “the corroboration re-
quirement has never been so demanding”). Documents
also corroborated Dr. Kawka’s testimony that the 37.2 gsm
vermiculite layer used in the August 2010 FAA testing met
the claimed limitations for the refractory layer. For each
aspect of the claimed limitations, other corroborating
28 E.I. DU PONT DE NEMOURS & CO. v. UNIFRAX I LLC
evidence similarly supported the credibility of the inven-
tors’ story of conception of the claimed ranges and reduc-
tion to practice of an embodiment meeting the limitations.
Under the “rule of reason” analysis, the evidence in its
totality supports the jury’s finding that the inventors’ tes-
timony was sufficiently corroborated. Therefore, substan-
tial evidence supports the inventors’ story of a conception
date and reduction to practice before the May 17, 2011 pub-
lic use date of 3G7, and, therefore, 3G7 is not anticipatory
prior art.
Accordingly, because the jury’s verdict of no-invalidity
is supported by legally sufficient evidence, we affirm the
district court’s denial of Unifrax’s motion for judgment of
invalidity as a matter of law.
CONCLUSION
We have considered Unifrax’s other arguments and
find them unpersuasive. For the foregoing reasons, the de-
cisions of the district court are affirmed.
AFFIRMED
COSTS
No costs.
United States Court of Appeals
for the Federal Circuit
______________________
E.I. DUPONT DE NEMOURS & COMPANY,
Plaintiff-Appellee
v.
UNIFRAX I LLC,
Defendant-Appellant
______________________
2017-2575
______________________
Appeal from the United States District Court for the
District of Delaware in No. 1:14-cv-01250-RGA, Judge
Richard G. Andrews.
______________________
O’MALLEY, Circuit Judge, dissenting.
I respectfully dissent from the majority’s ruling affirm-
ing the district court’s denial of JMOL on noninfringement.
That ruling is predicated on an erroneous construction of
“100% by weight” that ignores the plain meaning of “100%”
and introduces more ambiguity than it resolves. Because
this construction led the jury down the wrong path en route
to its infringement verdict, the construction should be va-
cated and the noninfringement JMOL ruling reversed.
I. THE ’926 PATENT CLAIMS AND SPECIFICATION SUPPORT
UNIFRAX’S PLAIN AND ORDINARY MEANING CONSTRUCTION
The ’926 patent claims recite “an inorganic refractory
layer” that “comprises platelets in an amount of 100% by
2 E.I. DUPONT DE NEMOURS & CO. v. UNIFRAX I LLC
weight with a dry areal weight of 15 to 50 gsm and a resid-
ual moisture content of no greater than 10 percent by
weight.” ’926 patent, col. 9, ll. 13–17 (emphases added).
There is no ambiguity in this language. The “platelets”
must be present in the refractory layer “in an amount of
100% by weight.” The “100% by weight” language, coupled
with the requirement that the platelets exist in an “inor-
ganic refractory layer,” clearly contemplates that the plate-
lets—i.e., inorganic material—constitute the entirety of the
refractory layer. 1 That leaves no room for other organic
additives. There is perhaps no clearer or simpler way the
patentee could have conveyed such a requirement.
See Phillips v. AWH Corp., 415 F.3d 1303, 1314 (Fed. Cir.
2005) (en banc) (“In some cases, the ordinary meaning of
claim language as understood by a person of skill in the art
may be readily apparent even to lay judges, and claim con-
struction in such cases involves little more than the appli-
cation of the widely accepted meaning of commonly
understood words.”); Takeda Pharm. Co. v. Zydus Pharm.
USA, Inc., 743 F.3d 1359, 1363–64 (Fed. Cir. 2014)
(“[T]here is no indication in the claim that 400 µm was in-
tended to mean anything other than exactly 400 µm.”).
In short, the claims “mean precisely what they say,” Cent.
Admixture Pharmacy Servs., Inc. v. Advanced Cardiac
Sols., P.C., 482 F.3d 1347, 1355 (Fed. Cir. 2007), and we
should construe them accordingly.
1 Unifrax does not appear to dispute that “100% by
weight” could encompass the presence of minor impurities.
See E.I. du Pont de Nemours & Co. v. Unifrax I LLC, No.
14-1250-RGA, 2016 WL 158031, at *6 (D. Del. Jan. 13,
2006) (noting Unifrax’s argument that “the plain and ordi-
nary meaning of ‘100%’ would not necessarily preclude the
presence of impurities or ‘one particle of dust, [or] one drop-
let of moisture, [or] one molecule of a residual dispersant’”).
E.I. DUPONT DE NEMOURS & CO. v. UNIFRAX I LLC 3
The majority finds ambiguity in “100%” because the
claims allow the refractory layer to comprise “a residual
moisture content of no greater than 10 percent by weight.”
The majority suggests that, if one were to adopt the plain
and ordinary meaning of “100% by weight,” the compo-
nents of the refractory layer would add up to 110%. Major-
ity Op. at 11 (“It would be nonsensical if the total
percentage of components comprising the inorganic refrac-
tory layer exceeded 100%.”). But this purported ambiguity
is easily resolved by viewing “residual moisture” in context.
The claims refer to a “dry areal weight of 15 to 50 gsm,”
which implies that the “100% by weight” requirement ap-
plies when the refractory layer is dry. The “residual mois-
ture” language, by contrast, clarifies that there can be
moisture present after the remaining steps of the manufac-
turing process are carried out. For example, the ’926 pa-
tent describes experiments in which the refractory layer is
immersed in a cation-rich solution and then dried in an
oven until the laminate contains “about 3% moisture con-
tent.” ’926 patent, col. 8, ll. 49–58 (“Once dried to about 3%
moisture content, the cation treated material was removed
from the oven.”). 2
2 Other portions of the specification confirm this un-
derstanding. For example, the specification states that the
refractory layer can have “some residual dispersant arising
from incomplete drying of the platelet dispersion during
manufacture.” ’926 patent, col. 3, ll. 24–26 (emphasis
added). The ’926 patent also states that “[v]ermiculite typ-
ically comprises by (dry) weight, on a theoretical oxide ba-
sis, about 38–46% SiO2, about 16–24% MgO, about 11–16%
Al2O3, about 8–13% Fe2O3 and the remainder generally ox-
ides of K, Ca, Ti, Mn, Cr, Na, and Ba.” Id. at col. 3, ll. 40–
44 (emphasis added). These passages imply that the re-
fractory layer is a 100%-platelet composition dispersed in
4 E.I. DUPONT DE NEMOURS & CO. v. UNIFRAX I LLC
Put simply, the claim language says that the refractory
layer initially comprises a 100%-platelet composition and
then it also allows the refractory layer to retain up to 10%
“residual moisture” after drying. DuPont’s counsel con-
ceded as much before the district court. See J.A. 819 at
63:13–64:25 (The Court: “[T]he ‘100% by weight of plate-
lets,’ is that ‘100% by weight,’ itself, 15 to 50 gsm?”
DuPont: “Yes. The dry aerial [sic] weight.” . . . The Court:
“And that 10% by weight is relative to what?” DuPont: “To
the total weight of the layer when it’s not dry. . . . [T]he
dry weight would be without the water, and the residual
moisture is with.”).
The majority also relies on a passage in the ’926 pa-
tent’s specification referring to “residual dispersant”:
Preferably at least 85% of the layer comprises
platelets, more preferably at least 90% and most
preferably at least 95%. In some embodiments,
platelets comprise 100% of the layer. The refrac-
tory layer may comprise some residual dispersant
arising from incomplete drying of the platelet dis-
persion during manufacture.
’926 patent, col. 3, ll. 21–26. But this passage does not jus-
tify a construction that deviates from the plain language of
the claim. As an initial matter, the claims recite “residual
moisture” and not “residual dispersant.” In any event, this
passage supports Unifrax’s reading. It suggests that the
refractory layer should contain source material comprised
of 100% dry platelets dispersed in water using a “disper-
sant,” and that, “during manufacture,” the water is dried
(and therefore evaporated). Some “residual dispersant”
can remain in the layer—just as residual moisture can re-
main—if the layer is not completely dried. Id. (permitting
an aqueous solution and dried during the manufacturing
process (leaving some residual moisture behind).
E.I. DUPONT DE NEMOURS & CO. v. UNIFRAX I LLC 5
the refractory layer to contain residual dispersant “arising
from incomplete drying”). But, critically, the “100% by
weight” limitation focuses on the dried source material
(i.e., the platelets), not on the residual dispersant.
The majority asserts that a construction excluding dis-
persants goes further than Unifrax requests. Majority Op.
at 17. Our task, however, is to interpret the claims based
on their plain language in view of the intrinsic and extrin-
sic record. See, e.g., Exxon Chem. Patents, Inc. v. Lubrizol
Corp., 64 F.3d 1553, 1556 (Fed. Cir. 1995) (“[T]he judge’s
task is not to decide which of the adversaries is correct. In-
stead the judge must independently assess the claims, the
specification, and if necessary the prosecution history, and
relevant extrinsic evidence, and declare the meaning of the
claims.”). Regardless, Unifrax argued that the ’926 patent
claims, as amended, “claim[] embodiments where platelets
comprise 100% of the dried layer.” Appellant’s Br. at 40;
see also J.A. 779 (criticizing DuPont for shifting away from
its earlier position that “its inorganic refractory layer re-
quires 100% by weight platelets without qualification”).
It is irrelevant that Unifrax took a different position at
trial, where it could not challenge the district court’s con-
struction. Compare Majority Op. at 17 (citing statements
during trial), with O2 Micro Int’l Ltd. v. Beyond Innovation
Tech. Co., 521 F.3d 1351, 1359 (Fed. Cir. 2008) (“When the
claim construction is resolved pre-trial, and the patentee
presented the same position in the Markman proceeding as
is now pressed, a further objection to the district court’s
pre-trial ruling may indeed have been not only futile but
unnecessary.”).
The majority also rests its construction on the fact that
the ’926 patent mentions MicroLite HTS-XE as a “suitable
material[].” Majority Op. at 12. But the datasheet pub-
lished by the manufacturer of MicroLite—cited by the ma-
jority—distinguishes between “unformulated” and
“formulated” dispersions. J.A. 7617. The former category
includes products that “are 100% inorganic, consisting only
6 E.I. DUPONT DE NEMOURS & CO. v. UNIFRAX I LLC
of vermiculite and water.” J.A. 7617. The latter, by con-
trast, includes products, such as MicroLite HTS-XE, with
other “additives.” Id. That the claims recite the same lan-
guage this manufacturer used to describe unformulated
dispersions—100% inorganic—implies that DuPont
claimed those dispersions and not formulated ones. This is
particularly salient here because the “100% by weight” lan-
guage was specifically added to overcome prior art. 3 And
so, while the original claims may have been broad enough
to encompass a refractory layer made of MicroLite HTS-
XE, the amended claims are not. See, e.g., Elekta Instru-
ment S.A. v. O.U.R. Sci. Int’l, Inc., 214 F.3d 1302, 1308
(Fed. Cir. 2000) (noting that “the unambiguous language of
the amended claim controls over any contradictory lan-
guage in the written description” even when this means the
claims, as amended, no longer cover the “only embodiment
disclosed in the specification”). Besides MicroLite HTS-
XE, the majority acknowledges that “all twenty-four
3 Original claim 1 recited an “inorganic refractory
layer” without limitation as to the layer’s composition. See
J.A. 300. That claim was rejected over a prior art reference
(Tompkins) that taught a refractory layer having platelets
as the main component, up to 70% by weight. DuPont
amended the claim by adding the “100% by weight” limita-
tion at issue here. See J.A. 374. In so doing, DuPont dis-
tinguished Tompkins by noting that, while
“Tompkins . . . directly require[s] a platelet concentration
which is considerably less than 100%,” the amended claims
recite a multilayer structure in which “the platelet concen-
tration is 100%.” J.A. 373. At the very least, by distin-
guishing Tompkins based on its 70%-platelet
concentration, DuPont disclaimed platelet concentrations
considerably less than 100%. The majority’s contrary con-
clusion—that the refractory layer can include dispersants
because it has a defined moisture content—simply repeats
its misreading of the claim language. Majority Op. at 15.
E.I. DUPONT DE NEMOURS & CO. v. UNIFRAX I LLC 7
[other] examples of the refractory layer . . . shown in the
specification have 100% by weight inorganic platelets with
no residual dispersant.” Majority Op. at 12.
For these reasons, I would conclude that a proper read-
ing of “100% by weight” permits the refractory layer to con-
tain residual moisture but no other ingredients.
II. THE ’027 PARENT PATENT DOES NOT JUSTIFY
A CONTRARY CONSTRUCTION
Rather than giving “100%” its plain and ordinary
meaning, the majority concludes that “100% by weight”
means 100% “relative to carrier material in the refractory
layer.” See, e.g., Majority Op. at 12. But the ’926 patent
does not mention “carrier material” and neither party prof-
fered any expert testimony stating that a skilled artisan
would read the patent as describing such material. In-
stead, this term comes from the specification of the ’926 pa-
tent’s parent—the ’027 patent. The specification of that
patent includes the following passage:
In one embodiment of this invention, the inorganic
platelet layer contains 100% platelets i.e. there is no
carrier material such as resin, adhesive, cloth or pa-
per. However, there may be some residual disper-
sant arising from incomplete drying of the platelet
dispersion.
’027 patent, col. 2, ll. 32–36 (emphasis added). Both parties
agree—and the district court found—that this passage does
not rise to the level of lexicography. See E.I. du Pont, 2016
WL 158031, at *8 (“DuPont’s construction does not meet
the exacting standards for finding lexicography.”); Appellee
Br. 16 n.3 (DuPont agreeing that lexicography does not ap-
ply). Yet the district court’s construction imported this
passage from the ’027 patent into the ’926 patent claims
nearly verbatim. Majority Op. at 13 (“The district court’s
construction of ‘100% by weight’ comes directly from lan-
guage in the parent ’027 patent . . . .”). That is improper.
8 E.I. DUPONT DE NEMOURS & CO. v. UNIFRAX I LLC
See Meds. Co. v. Mylan, Inc., 853 F.3d 1296, 1306 (Fed. Cir.
2017) (rejecting the patentee’s attempt to take a statement
“verbatim” from the common specification where the state-
ment “lacks the clear expression of intent necessary for a
patentee to act as its own lexicographer”).
The majority treats the ’027 patent as persuasive, how-
ever, because the two patents purportedly share “common
subject matter” and “[t]he patentees demonstrated in the
’926 patent the same understanding of 100%” that is re-
flected in the ’027 patent. Majority Op. at 15. But the ’926
patent is a continuation-in-part of the ’027 patent with a
different specification. And the applicant chose to write
this new specification without mentioning “carrier mate-
rial” or incorporating the ’027 patent by reference, which
underscores the impropriety of importing that limitation
into the ’926 patent claims. See, e.g., Trading Techs. Int’l,
Inc. v. Open E Cry, LLC, 728 F.3d 1309, 1323 (Fed. Cir.
2013) (distinguishing between a patent and its continua-
tion-in-part parent for purposes of claim construction
where the former “include[d] extensive disclosures that
were not present” in the latter). It also indicates that the
subject matter of these patents is not common in the only
way that matters for interpreting these claims. The major-
ity, thus, relies on a commonality that does not exist.
Worse still, the ’027 patent does not contain a claim
limitation analogous to “100% by weight.” This difference
implies that the ’027 patent and the ’926 patent claims
were intended to have different scopes. The district court’s
and the majority’s heavy reliance on the ’027 patent is
therefore unjustified. See Advanced Cardiovascular Sys.,
Inc. v. Medtronic, Inc., 265 F.3d 1294, 1305–06 (Fed. Cir.
2001) (refusing to consider prosecution history of related
patent where there were “no common claim terms in dis-
pute” across the patents); ResQNet.com, Inc. v. Lansa, Inc.,
346 F.3d 1374, 1382 (Fed. Cir. 2003) (“These similarities
reflect the parentage of the ’608 patent, which is a contin-
uation-in-part (CIP) of the ’961 patent. Although the
E.I. DUPONT DE NEMOURS & CO. v. UNIFRAX I LLC 9
related patents are similar, their claims are not identi-
cal . . . This difference is significant. Therefore, this court
interprets the claim anew, without regard to the interpre-
tation of claim 1 of the ’961 patent.”).
Of course, a parent patent is relevant to claim construc-
tion issues involving its continuation-in-part child and
therefore ought to be considered for its probative value.
See, e.g., Jonsson v. Stanley Works, 903 F.2d 812, 818 (Fed.
Cir. 1990) (acknowledging it was “not disputed” that the
two patents contained similar limitations); Wang Labs.,
Inc. v. Am. Online, Inc., 197 F.3d 1377, 1383 (Fed. Cir.
1999) (concluding that the patents had common subject
matter); Ormco Corp. v. Align Tech., Inc., 498 F.3d 1307,
1314 (Fed. Cir. 2007) (noting that the specifications of the
parent and child patents “have the same content”).
But that value is limited where the two patents recite dif-
ferent claims based on different specifications using differ-
ent words. To be sure, Jonsson and its progeny emphasized
the value of certain statements made during the prosecu-
tion history of a parent patent. See Jonsson, 903 F.2d at
818 (discussing “arguments and remarks” offered during
prosecution of the parent patent to distinguish it from the
prior art); Wang, 197 F.3d at 1384 (considering arguments
made “during the prosecution of the parent application” to
distinguish the parent from a prior art reference); Ormco,
498 F.3d at 1314 (“When the application of prosecution dis-
claimer involves statements from prosecution of a familial
patent relating to the same subject matter as the claim lan-
guage at issue in the patent being construed, those state-
ments in the familial application are relevant in construing
the claims at issue.”). But, as noted above, the majority
imports a limitation from the parent patent’s specification
which was removed from the ’926 patent. 4 At the very
4 The parent patent’s specification is certainly part
of the child’s prosecution history. But statements from the
10 E.I. DUPONT DE NEMOURS & CO. v. UNIFRAX I LLC
least, it is improper to rely so heavily on a related patent’s
specification to drive the claim construction analysis of a
different patent, as the district court and majority appear
to have done here.
III. THE DISTRICT COURT’S CONSTRUCTION OF
“100% BY WEIGHT” LED THE JURY ASTRAY
The district court’s construction created confusion at
trial and distracted the jury from its infringement inquiry
because the construction shifted focus away from the con-
centration of platelets in the refractory layer. As a result,
the jury was asked to determine whether certain non-plate-
let additives count as “carriers” or “dispersants,” even
though neither term is mentioned in the claims. And those
terms were moving targets throughout the trial. For ex-
ample, the jury received competing definitions—as well as
permutations of similar definitions—from the parties.
See, e.g., J.A. 6080, 681:19–23 (DuPont’s expert testified
that “push[ing] materials apart or help[ing] them separate”
is “one of the things [a dispersant] can do” (emphasis
added)); J.A. 6081, 682:2–6 (DuPont’s expert testified that
a “[c]arrier can mean many things” and that “it’s kind of a
vague term”).
This confusion led the jury to conclude, improperly,
that Unifrax’s 95%-platelet refractory layer satisfies the
parent patent’s specification that fall short of lexicography
do not have the same force as arguments about claim scope
from the prosecution history. See Ormco, 498 F.3d at 1314
(“While all those statements by the inventors in the speci-
fication of the Ormco patents, standing alone, may not be
conclusive in showing that the claims require completely
automatic determination of final tooth positions, those in
the prosecution history make it even clearer.”).
E.I. DUPONT DE NEMOURS & CO. v. UNIFRAX I LLC 11
claims’ 100%-platelet requirement. 5 But that defies the
plain claim language, as well as common sense, and should
not be permitted to stand. See CytoLogix Corp. v. Ventana
Med. Sys., Inc., 424 F.3d 1168, 1173 (Fed. Cir. 2005) (“[I]t
appears that the conflicting expert views as to claim con-
struction created confusion and may have led to a verdict
of infringement with respect to the asserted claims of the
’061 patent that was not supported by substantial evi-
dence . . . .”).
For these reasons, I would vacate the district court’s
construction of “100% by weight” and adopt instead the
term’s plain meaning—i.e., that the refractory layer must
comprise a 100%-platelet composition when dry, and that,
only after the remaining steps of the manufacturing pro-
cess are completed may there be up to 10% of residual mois-
ture remaining. Because DuPont does not dispute that
5 The district court “acknowledge[d] the possibility
that [its] construction of ‘100% by weight’ may yield ques-
tions in the future regarding the meaning of other terms,”
E.I. du Pont, 2016 WL 158031, at *10, but the court de-
clined to subsequently construe those other terms. To be
clear, there is nothing inherently wrong in this decision.
District court judges are often faced with the difficult task
of avoiding the “O2 Micro trap” that inevitably arises when
ambiguous claims terms are left unconstrued, while simul-
taneously managing their patent cases to ensure efficient
and orderly resolution and to deter belated claim construc-
tion proposals. See Nobelbiz, Inc. v. Global Connect, L.L.C.,
876 F.3d 1326, 1328–29 (Fed. Cir. 2017) (O’Malley, J., dis-
senting from the denial of en banc rehearing). We should
generally defer to district court judges on such matters.
See id. Here, however, the district court’s construction cre-
ated ambiguity where there should have been none.
In such instances, district courts must be vigilant to re-
solve such ambiguities.
12 E.I. DUPONT DE NEMOURS & CO. v. UNIFRAX I LLC
Unifrax’s product does not infringe under that construc-
tion, I would reverse the district court’s denial of JMOL as
to noninfringement. See Finisar Corp. v. DirecTV Grp.,
Inc., 523 F.3d 1323, 1333 (Fed. Cir. 2008) (“If no reasonable
jury could have found infringement under the proper claim
construction, this court may reverse a district court’s de-
nial of JMOL without remand.”).