NOTE: Pursuant to Fed. Cir. R. 47.6, this disposition
is not citable as precedent. It is a public record.
United States Court of Appeals for the Federal Circuit
04-1163,-1164
JORE CORPORATION,
Plaintiff-Cross Appellant,
v.
KOUVATO, INC.,
Defendant/Third Party Plaintiff-
Appellant,
v.
HOME DEPOT U.S.A., INC., THE STANLEY WORKS LIMITED,
THE STANLEY WORKS, STANLEY LOGISTICS, INC.,
and OLD JORE CORPORATION,
Third Party Defendants-
Appellees.
___________________________
DECIDED: January 7, 2005
___________________________
Before LOURIE, Circuit Judge, FRIEDMAN, Senior Circuit Judge, and BRYSON, Circuit
Judge.
BRYSON, Circuit Judge.
Appellant Kouvato, Inc., is the assignee of a design patent on a drill bit, U.S.
Design Patent No. 419,575 (“the ’575 patent”). Kouvato filed an action alleging
infringement of the ’575 patent by The Stanley Works Ltd.; The Stanley Works; Stanley
Works Logistics, Inc. (collectively, “the Stanley defendants”); Home Depot, U.S.A., Inc.;
and a company named, at that time, Jore Corporation (“Old Jore”). Old Jore filed a
separate action against Kouvato seeking a declaratory judgment that the ’575 patent
was invalid and unenforceable, and that Old Jore did not infringe the patent. Old Jore
subsequently filed for bankruptcy, and its assets and name were bought by the newly
organized company, Jore Corporation (“Jore”). The new Jore Corporation was then
joined as a plaintiff and counterclaim defendant. The cases were consolidated in the
United States District Court for the District of Montana, CV 01-181-M-DWM.
The district court subsequently granted summary judgment of non-infringement
for the Stanley defendants. The remainder of the case went to trial before a jury.
Following the trial, the jury found that the ’575 patent was valid and enforceable but not
infringed. Jore and Home Depot moved for judgment as a matter of law on the issues
of patent invalidity and unenforceability. Kouvato filed a motion for a new trial. The
district court denied Jore and Home Depot’s motion for judgment as a matter of law and
Kouvato’s motion for a new trial. The court then awarded Home Depot its costs, but it
denied costs to Jore because the court concluded that Jore was not a prevailing party.
Kouvato appeals the determination of noninfringement. Jore cross-appeals the ruling
that the patent is valid and enforceable and also challenges the district court’s finding
that the corporation is not a prevailing party for purposes of awarding costs.
During trial, Jore presented two pieces of prior art, which the company claimed
rendered the ’575 patent obvious. The first piece was a high speed, reduced-shank
steel helical drill bit made by the Triumph Twist Drill Co. For purposes of its argument
that the ’575 patent would be obvious, Jore designated the Triumph bit as the “primary
04-1163,-1164 2
reference” in the prior art, “the design characteristics of which are basically the same as
the claimed design.” In re Rosen, 673 F.2d 388, 391 (CCPA 1982). A piece of prior art
cannot serve as the primary reference if major modification would be required to make
the reference look like the claimed design. In re Harvey, 12 F.3d 1061, 1063 (Fed. Cir.
1993). An examination of the Triumph bit and Figure 2 of the ’575 patent makes clear
that the two bits are almost identical:
Figure 2 of the ’575 design patent
Triumph prior art bit
The sole difference between the two bits is that the Triumph bit has a cylindrical shaft,
whereas the ’575 patent discloses a hexagonal shaft with a narrow groove at the end.
Both parties apparently agree on that point, and therefore the Triumph bit may serve as
the primary reference.
Once a primary reference is identified, the party asserting obviousness may then
present a secondary reference in an effort to show that the primary and secondary prior
art references make the claimed design obvious to one of skill in the art. In re Borden,
90 F.3d 1570, 1574 (Fed. Cir. 1996). For secondary references to be considered,
04-1163,-1164 3
however, there must be some suggestion in the prior art to modify the basic design with
features from the secondary references. L.A. Gear, Inc. v. Thom McAn Shoe Co., 988
F.2d 1117, 1124 (Fed Cir. 1993). In this case, Jore argues that U.S. Patent No.
4,818,157 (“the ’157 patent”) teaches that a hexagonal shaft with a narrow groove at the
end may be placed on the end of a drill bit or any other such tool that is driven by rotary
power. Id. at col. 3, ll. 5-7, 15-20. Furthermore, Jore contends that Figure 1 and Figure
4 of the ’157 patent depict a drill bit having a standard-sized hexagonal shaft with a
narrow groove in the shaft:
Figure 1 and Figure 4 of the ’157 patent
As Jore argues, the ’157 patent clearly contemplates that any drill bit “or other such tool”
can receive a standard-sized hexagonal shaft with narrow groove. Id. at col. 2, line 2;
id. at col. 3, ll. 15-20. Therefore, the ’157 patent itself contains an express motivation to
combine the ’157 patent with a design such as that disclosed in the Triumph drill bit.
Kouvato counters that combining the Triumph bit with the teaching of the ’157
patent would not have rendered its patent obvious. Kouvato first argues that unlike the
04-1163,-1164 4
’575 patent, the ’157 patent does not show a hexagonal shaft that is reduced in
diameter compared to the helical “working portion” of the drill bit. For that reason,
Kouvato contends that the ’575 patent would not have been obvious in light of the ’157
patent. That argument fails, however, because the Triumph drill bit itself contains a
reduced shaft. Therefore, there is no need for the ’157 patent to teach that feature as
well.
In the alternative, Kouvato contends that even if the ’157 patent and the Triumph
bit teach a bit containing a reduced, hexagonal shaft, there is no indication in either
piece of prior art of how to combine that shaft with the cylindrical working portion of the
bit. Kouvato maintains that the manner in which the shaft joins the larger working
portion is a design choice. Kouvato supports that argument with testimony from its
expert, Professor Ralph Barnett, who stated that other prior art “taught away” from
simply joining the shaft with the working portion to create a 90 degree transition
between the two. Specifically, Professor Barnett stated that a particular bit sold by a
company known as Insty Bit showed a transition from shaft to working portion that
consisted of a “collar” that was thicker than either the shaft or the working portion of the
bit. According to Professor Barnett, the Insty Bit collar therefore “taught away” from
simply adjoining the hexagonal shaft with the working portion of the bit.
What a piece of prior art teaches is a question of fact. Tec Air, Inc. v. Denso Mfg.
Mich. Inc., 192 F.3d 1353, 1359 (Fed. Cir. 1999). However, Professor Barnett’s
assertion that the Insty Bit design “taught away” from the ’575 patent was based on a
legal misconception. Simply because a piece of prior art contains a feature that is not
present in the patent does not mean that the prior art teaches away from the patent.
04-1163,-1164 5
Para-Ordnance Mfg., Inc. v. SGS Imps. Int’l, Inc., 73 F.3d 1085, 1090 (Fed. Cir. 1995).
A reference teaches away only when a person of ordinary skill, upon examining the
reference, would be discouraged from following the path set out in the reference, or
would be led in a direction different from the path that was taken by the applicant. In re
Gurley, 27 F.3d 551, 553 (Fed. Cir. 1994).
Nothing in the evidence in this case suggests that the Insty Bit design would lead
persons of skill in the art to join a smaller shaft and larger working portion of the bit only
by using a collar. To the contrary, Professor Barnett admitted that there was an entire
class of bits that did not use a collar as a transition between a smaller shaft and larger
working portion. Furthermore, the president of Insty Bit testified at trial that other Insty
Bit brand drill bits did not use a collar, and the evidence included many pieces of prior
art, including the Triumph bit itself, that used a direct 90 degree transition between a
smaller shaft and larger working portion. Most damaging of all, the inventor of the ’575
patent admitted that the drill bit shown in the ’157 patent would look like his claimed drill
bit if the working portion of the drill bit in the ’157 patent had a larger diameter.
In denying Jore’s motion for judgment notwithstanding the verdict on the issue of
invalidity, the district court relied on two pieces of evidence to uphold the jury’s verdict of
nonobviousness. The court relied on Professor Barnett’s conclusion that the Insty Bit
taught away from the patented design and that there was a long-felt need for the
design. See Graham v. John Deere Co., 383 U.S. 1 (1966). As we discussed above,
the prior art did not actually teach away from the ’575 patent. Moreover, the “long-felt
need” to which the district court referred was based on the fact that, according to
Professor Barnett, reduced hexagonal shafts had been “around forever” but the exact
04-1163,-1164 6
configuration of the ’575 patent was new. That testimony, however, does not
demonstrate a long-felt need. If the fact of a new design in an old art field demonstrated
a long-felt need for the new design, long-felt need would not be a meaningful indicator
of nonobviousness but would merely be another way of saying that a particular design is
novel.
Kouvato also introduced a press release that Jore had sent out regarding the
accused device. The press release described the accused bit as being among its
“exciting new products.” Kouvato argues that the press release demonstrates that there
was a long-felt need for the patented design. However, the fact that Jore touted the
accused bit as one of its “new products” does not suggest that the design of the bit was
novel, and it certainly does not prove that there was any long-felt need for the patented
design.
There was no other evidence to indicate that the ’575 patent would not have
been obvious. On appeal, Kouvato suggests that Old Jore copied the ’575 patent’s
design. There is no evidence in the record to support that allegation, however. The
evidence presented at trial showed that Old Jore was designing and selling the accused
drill bit at least five months before anyone at the company became aware of the ’575
patent. In sum, Jore showed by clear and convincing evidence that the ’575 patent
would have been obvious, and that showing went unrebutted at trial. While we give
considerable deference to a jury’s factual findings, Markman v. Westview Instruments,
Inc., 52 F.3d 967, 975 (Fed. Cir. 1995), we must still determine “if those findings support
the legal conclusion drawn by the jury in reaching its verdict,” Georgia-Pacific Corp. v.
United States Gypsum Co., 195 F.3d 1322, 1329 (Fed. Cir. 1999). In this case, the
04-1163,-1164 7
ultimate determination of obviousness is a question of law, which Jore proved by
unrefuted clear and convincing evidence. Golden Blount, Inc. v. Robert H. Peterson
Co., 365 F.3d 1054, 1058 (Fed. Cir. 2004). Therefore, the district court should have
granted Jore’s motion for a judgment of invalidity notwithstanding the verdict.
In light of our determination that the ’575 patent is invalid, it is unnecessary for us
to address the questions of infringement or unenforceability. We therefore affirm the
judgment of the district court, albeit on a different ground. However, because Jore is
plainly a prevailing party, we vacate the district court’s denial of an award of costs to
Jore; on remand the trial court should revisit the question of costs.
04-1163,-1164 8