CONDITIONALLY GRANT; and Opinion Filed August 6, 2014.
S In The
Court of Appeals
Fifth District of Texas at Dallas
No. 05-14-00529-CV
IN RE THE GOODYEAR TIRE & RUBBER COMPANY, Relator
Original Proceeding from the 95th Judicial District Court
Dallas County, Texas
Trial Court Cause No. DC-12-07666
OPINION
Before Justices Moseley, Fillmore, and Evans
Opinion by Justice Fillmore
Relator, Goodyear Tire & Rubber Company (Goodyear), filed this petition for writ of
mandamus challenging the trial court’s order requiring Goodyear to grant plaintiffs’ counsel,
expert witness, and videographer access to its plant in North Carolina to demonstrate and
videotape the manufacture of two types of tires. We conditionally grant relief.
FACTUAL AND PROCEDURAL CONTEXT
This mandamus proceeding arises in a wrongful death case following an automobile
accident the plaintiffs contend was caused by a defective tire manufactured by Goodyear. The
plaintiffs maintain that Goodyear was grossly negligent with respect to its tire manufacturing
practices at its Fayetteville, North Carolina plant at the time the tire was produced and that the
design of the tire was defective because it failed to include a nylon cap ply, which the plaintiffs
contend is a safer design. The tire that is the subject of this lawsuit was a P265/75R16 114S
Kelly Safari Trex SL OWL manufactured in March 2007.
The plaintiffs initially sought a four-hour tour of large sections of the plant, but
subsequently limited their request. The plaintiffs explained that instead of being allowed to tour
and videotape any part of the plant where any component of the tire at issue had been processed,
they wished to view and record the operation of only the “first stage” and “second stage” tire
manufacturing machines “because those are the two machines that were used to build our tire.”
They stated that if the actual machine used to manufacture the tire at issue was not available for
this purpose, they would agree to view “a substantially similar tire building machine.” They
further explained that they believed anomalies their tire expert had identified in the tire at issue
“were caused by the person or equipment that was involved in that process” and that they hoped
to use their recording of the tire manufacturing demonstration to “try to prove the correlation
between what was going on in the plant when our tire was made and why it failed later on due to
these defects.” They also requested to view the manufacture of a nylon cap ply tire because it is
one of the designs that the plaintiffs consider safer. The plaintiffs contend this demonstration
will allow them to “prove the extreme simplicity of adding this cost-efficient safety component
to the tire.”
The trial court ordered Goodyear to allow plaintiff’s counsel, expert witness, and
videographer to enter the facility where the tire was manufactured for a period of one hour to
document the manufacturing process. According to the trial court’s order:
The inspection may only include the inspection, photography and videography of
the tire building machines used to place the inner liner on the tire building drum
and to assemble the 1st and 2nd steel belts into the pre-cured tire (sometimes
referred to as the first and second stage tire building machines) on which the
subject tire was manufactured, or in the alternative, inspection of the most similar
tire building machines to be identified by Goodyear at the time of the inspection,
if the specific tire building machines on which the subject . . . tire . . .
manufactured in the 12th week of 2007, cannot be identified;
–2–
The trial court’s order divided the demonstration into two thirty-minute segments. During the
first segment, Goodyear was required to permit observation and recording of a “tire building
machine that manufactures tires of the same size as the subject tire with a nylon overlay or ‘cap
ply.’” During the second segment, Goodyear was required to permit observation and recording
of a “tire building machine that manufactures tires of the same size as the subject tire without a
nylon overlay or ‘cap ply.’”
The undisputed 1 affidavit evidence before the trial court established that two months after
the tire at issue was manufactured, Goodyear changed the design of the tire, and the equipment
that had been used to manufacture the tire had been removed from the plant. As of the date of
the hearing before the trial court, one such machine had been returned to the plant, but it was
being used to manufacture a different size tire. The affidavit evidence also established that no
tire of the same size as the subject tire, whether with or without a nylon cap ply, is currently
manufactured on the type of machine that produced the subject tire.
APPROPRIATENESS OF MANDAMUS REVIEW
Standard for Granting Mandamus Relief
Mandamus is an extraordinary remedy that is available only in limited circumstances.
CSR Ltd. v. Link, 925 S.W.2d 591, 596 (Tex. 1996) (orig. proceeding) (citing Walker v. Packer,
827 S.W.2d 833, 840 (Tex. 1992) (orig. proceeding)). “Mandamus is appropriate ‘only to
1
The plaintiffs argue that they objected to one of Goodyear’s affidavits. At the hearing on the motion for entry onto land, the plaintiffs
argued that the affidavit “fail[ed] to elaborate on two key points,” regarding media access to the plant and changes in equipment at the plant. The
plaintiffs did not, however, object to the affidavit and the trial court did not rule on any purported objection. Accordingly, the plaintiffs waived
any objection they had to the affidavit. TEX. R. APP. P. 33.1. Moreover, the plaintiffs did not attempt to offer contrary evidence other than
counsel’s suggestion that “I think that this particular tire building machine may still be in there, and I want to go look at it. And until they prove
otherwise, I think we can assume that that’s what I want to go see.”
At a subsequent hearing, Goodyear provided additional affidavit evidence as follows:
Sometime after May 7, 2007, Goodyear removed from service all BBR-2 machines at the Fayetteville plant. Recently, one
of the BBR-2 machines was returned to operation at the Fayetteville plant. The tire that is currently being constructed on
the BBR-2 is not built to either the same specification as the Subject Tire or the Subsequent Specification. Indeed, among
other things, it is neither the same size nor aspect ratio as tires built to either specification. Furthermore, Goodyear cannot
confirm this machine was used to construct the Tire at Issue.
–3–
correct a clear abuse of discretion or the violation of a duty imposed by law when there is no
other adequate remedy by law.’” Id. (quoting Johnson v. Fourth Court of Appeals, 700 S.W.2d
916, 917 (Tex. 1985) (orig. proceeding)). To obtain mandamus relief, a relator must show both
that the trial court has clearly abused its discretion and that relator has no adequate appellate
remedy. In re Prudential Ins. Co., 148 S.W.3d 124, 135–36 (Tex. 2004) (orig. proceeding);
Walker, 827 S.W.2d at 839.
Adequacy of Appellate Remedy
We turn first to the question of whether appeal is an adequate remedy when a trial court
erroneously allows discovery that should not be permitted under rule 196.7. What constitutes an
adequate remedy on appeal has no comprehensive definition. See In re Ford Motor Co., 165
S.W.3d 315, 317 (Tex. 2005) (orig. proceeding) (per curiam) (citing In re Prudential, 148
S.W.3d at 136). Determining whether a party has an adequate remedy by appeal requires a
“careful balance of jurisprudential considerations” that “implicate both public and private
interests.” See id. (quoting In re Prudential, 148 S.W.3d at 136). “When the benefits [of
mandamus review] outweigh the detriments, appellate courts must consider whether the appellate
remedy is adequate.” Id. (quoting In re Prudential, 148 S.W.3d at 136). An appeal is inadequate
when the parties are in danger of permanently losing substantial rights. In re Van Waters &
Rogers, Inc., 145 S.W.3d 203, 211 (Tex. 2004) (orig. proceeding) (per curiam). “Such a danger
arises when the appellate court would not be able to cure the error, when the party’s ability to
present a viable claim or defense is vitiated, or when the error cannot be made part of the
appellate record.” Id. For this reason, mandamus relief is available when the trial court compels
production beyond the permissible bounds of discovery. See In re Weekley Homes, L.P., 295
S.W.3d 309, 322 (Tex. 2009) (orig. proceeding). Thus, we must address the appropriate
contours of discovery in cases involving requests for entry onto the property of another.
–4–
STANDARDS FOR ALLOWING ENTRY ONTO PROPERTY OF ANOTHER
Standard of Review
The scope of discovery largely rests within the discretion of the trial court. Ginsberg v.
Fifth Court of Appeals, 686 S.W.2d 105, 108 (Tex. 1985) (orig. proceeding). “[T]he ultimate
purpose of discovery is to seek the truth, so that disputes may be decided by what the facts
reveal, not by what facts are concealed.” In re Colonial Pipeline Co., 968 S.W.2d 938, 941 (Tex.
1998) (orig. proceeding) (per curiam) (quoting Jampole v. Touchy, 673 S.W.2d 569, 573 (Tex.
1984) (orig. proceeding)).
In considering whether a trial court has clearly abused its discretion with regard to a
discovery order, the reviewing court may not substitute its judgment for that of the trial court and
the relator must establish that the trial court could reasonably have reached only one decision.
Walker, 827 S.W.2d at 839–40. “Even if the reviewing court would have decided the issue
differently, it cannot disturb the trial court’s decision unless it is shown to be arbitrary and
unreasonable.” Id. at 840. When a trial judge exercising an otherwise discretionary authority
has only one course to follow and one way to decide, however, the discretion vested in the court
is for all practical purposes destroyed. Jones v. Strayhorn, 321 S.W.2d 290, 295 (Tex. 1959);
U.S. Fire Ins. Co. v. Millard, 847 S.W.2d 668, 671 (Tex. App.—Houston [1st Dist.] 1993, orig.
proceeding).
Requirements for Granting Entry onto Property Under Rule 196.7
Texas Rule of Civil Procedure 196.7 governs discovery that involves entering onto the
land or property of another party to inspect, measure, survey, photograph, test, or sample the
property or any designated object or operation. TEX. R. CIV. P. 196.7; In re SWEPI L.P., 103
S.W.3d 578, 583 (Tex. App.—San Antonio 2003, orig. proceeding). Rule 196.7 “does not
permit blanket discovery on a skeletal request when confronted with an objection.” In re
–5–
Kimberly-Clark Corp., 228 S.W.3d 480, 487 (Tex. App.—Dallas 2007, orig. proceeding).
Because Texas precedent interpreting rule 196.7 is relatively sparse, this Court has previously
relied on precedent under federal rule 34 to inform its decision. Id.
The purposes for which a person is permitted entry onto the property of an adversary are
limited. Id. at 487. Although a request for entry upon land must satisfy the general requirement
of relevance, mere relevance is not sufficient to justify a request for entry upon the property of
another. See id.; Belcher v. Bassett Furniture Indus., Inc., 588 F.2d 904, 908 (4th Cir. 1978)
(rejecting the contention that the requests for entry onto land are governed by the general
relevance standard). Discovery involving entry onto the property of another involves unique
burdens and risks including, among other things, confusion and disruption of the defendant’s
business and employees. In re Kimberly-Clark Corp., 228 S.W.3d at 486 (citing Belcher, 588
F.2d at 910). Thus, the trial court should conduct a “greater inquiry into the necessity for the
inspection, testing, or sampling.” Id. at 487. In conducting such an inquiry, the court must
balance the degree to which the proposed inspection will aid in the search for truth against the
burdens and dangers created by the inspection. Id. at 486.
The plaintiffs argue generally that the demonstration of the tire manufacturing process
permitted by the trial court will enable the plaintiffs to show “how the sloppy tire manufacturing
process resulted in the defects presented in the tire.” It is the plaintiffs’ theory that the tire was
defectively manufactured, allegedly because of the dilapidated condition of the plant, because the
tire manufacturing equipment was not working properly, and because Goodyear’s employees
were not properly trained and were often “not sober.” They argue that because tire production is
a partially automated and partially manual process, “it is unrealistic to expect the jury to fully
understand how drug impairment of the tire builder will lead to the sort of steel belt
misplacement and splicing errors noted in the failed tire at issue without seeing the process” and
–6–
that “[d]ocumentation of the tire building process is the critical link between the conditions at the
plant, the defects observable in the failed tire, and the tire builders’ training that such defects
were known by Goodyear to result in tread separations.” They conclude that “[a]ccess to these
tire building processes is essential to showing the jury how the types of conduct described by the
eyewitnesses resulted in the types of defects visible in the tire” and question how they can “show
the link between a drug-impaired, overly rushed, or otherwise careless tire builder’s substandard
job performance and the defects in the failed tire if the family is denied access to the tire building
process.” The plaintiffs also argue that the demonstration will enable the plaintiffs to show the
“extreme simplicity” of adding a nylon overlay to the tire, which they argue would have
prevented the tread separation. 2
The plaintiffs’ explanation of the materiality of the recording shows that the video is
intended for demonstrative purposes. See 36 TEX. JUR. 3D Evidence § 462 (2010) (“‘Real’
evidence should be used to refer to evidence directly involved in the incident giving rise to the
litigation, while ‘demonstrative’ should be reserved for evidence offered for purposes of
illustration.”). Rule 196.7 does not provide for the creation of new evidence for demonstrative
purposes. In re Kimberly-Clark Corp., 228 S.W.3d at 487. As the Tyler Court of Appeals has
explained:
The term “discovery” suggests the existence of the information being sought. The
various rules governing the discovery process in Texas show that the process is
intended for the gathering of relevant information within the control or knowledge
of others. There is nothing in the rules that suggests that the “discovery” process
is intended to provide for the “creation” of new evidence for the purpose of trial
presentation.
Amis v. Ashworth, 802 S.W.2d 374, 376 (Tex. App.—Tyler 1990, orig. proceeding [leave
denied]) (footnote omitted). In Amis the plaintiff sought entry onto the defendant’s property to
2
Goodyear has conceded that a nylon cap ply design was both technologically and economically feasible in 2007. It does not dispute the
ease of installing a nylon cap ply or the expense of doing so. Rather, it disputes whether such a design is safer.
–7–
make a videotape recreating the plaintiff’s version of the incident giving rise to the lawsuit.
Noting that the rules of civil procedure limit “photographing to recording the existing conditions
on the property,” the court concluded that a property owner has no obligation to “relinquish his
property for the creation of evidence designed and staged to portray his opponent’s version of the
occurrence in its most favorable light.” Id.
The video the plaintiffs seek to record falls into the category of “new evidence.” The
demonstration the trial court has ordered does not involve merely inspecting the machine that
produced the tire at issue to determine whether the condition of the machine may have caused the
production of a defective tire. Instead, it requires Goodyear to provide demonstrations of the
manufacture of completely different products with the intention that the plaintiffs will use those
demonstrations as a visual aid to illustrate their theories regarding the manner in which the
manufacture of the subject tire may have been deficient and how an alternate design that they
deem simple and inexpensive could have avoided the accident. The recording the plaintiffs want
to make does not attempt to document the process used in making the actual tire at issue in the
case nor does it document the condition of the plant at the time that the tire was manufactured.
See In re Kimberley-Clark, 228 S.W.3d at 489 (noting that proposed environmental testing in
2007 would not prove whether defendant knew of environmental contamination in 2006 when it
entered into contract for sale of property). Rather, seven years after the fact, it will document
work performed by different workers, using either a different machine or making a different tire,
under different conditions. In this respect the trial court’s order goes beyond the sort of
inspection, measurement, surveying, photographing, testing, or sampling contemplated by rule
196.7.
The recording the plaintiffs seek to create will be a generic representation of tire
manufacturing. The plaintiffs have effectively conceded that such a recording would not be
–8–
useful, rejecting as inadequate a previously produced tire manufacturing video because “[i]t
doesn’t tell us whether the tire that’s being made is of the same make, model or size as the
subject tire. It doesn’t tell us whether the tire being made is a passenger tire or a [light] truck tire.
It doesn’t tell us whether or not the tire that’s being made incorporates a nylon cap ply.” Further,
the recording the plaintiffs seek to create could be used as a dramatic presentation by the
plaintiffs of the poor tire manufacturing processes they contend were rampant at Goodyear’s
plant at the time the tire was manufactured. Neither forced participation in the creation of a
generic representation of tire manufacturing nor compelled participation in the preparation of a
dramatic demonstrative exhibit is consistent with the type of discovery contemplated under the
rules of civil procedure.
CONCLUSION
For all of these reasons, we conditionally grant relator’s petition for writ of mandamus.
A writ will issue only in the event the trial court fails to vacate its April 8, 2014 “Order on
Plaintiffs’ Motion for Entry Upon Land.”
/Robert M. Fillmore/
ROBERT M. FILLMORE
JUSTICE
140529F.P05
–9–