Nichia Corporation v. Everlight Americas, Inc.

United States Court of Appeals for the Federal Circuit ______________________ NICHIA CORPORATION, Plaintiff-Appellant v. EVERLIGHT AMERICAS, INC., EVERLIGHT ELECTRONICS CO., LTD., Defendants-Cross-Appellants ZENARO LIGHTING, INC., Defendant ______________________ 2016-1585, 2016-1618 ______________________ Appeals from the United States District Court for the Eastern District of Texas in No. 2:13-cv-00702-JRG, Judge J. Rodney Gilstrap. ______________________ Decided: April 28, 2017 ______________________ ROBERT P. PARKER, Rothwell, Figg, Ernst & Manbeck, P.C., Washington, DC, argued for plaintiff-appellant. Also represented by MARTIN MOSS ZOLTICK, MICHAEL JONES, DANIEL MCCALLUM, STEVEN PAUL WEIHROUCH. JERRY ROBIN SELINGER, Patterson & Sheridan LLP, Dallas, TX, argued for defendants-cross-appellants. Also represented by JAYME PARTRIDGE, BARDEN TODD 2 NICHIA CORPORATION v. EVERLIGHT AMERICAS, INC. PATTERSON, Houston, TX; ERIC W. BENISEK, JEFFREY T. LINDGREN, ROBERT MCARTHUR, STEPHEN C. STEINBERG, RICHARD C. VASQUEZ, Vasquez Benisek & Lindgren, LLP, Lafayette, CA. ______________________ Before REYNA, HUGHES, and STOLL, Circuit Judges. STOLL, Circuit Judge. Nichia Corporation sued Everlight Electronics Co., LTD., Everlight Americas, INC., and Zenaro Lighting, Inc. (collectively, “Everlight”) for infringement of three of its patents. Following a bench trial, the district court found Everlight infringed all three patents and had not proved them invalid. The court denied, however, Nichia’s request for a permanent injunction against Everlight. Nichia appeals the district court’s refusal to enter an injunction against Everlight. Everlight cross-appeals the court’s judgment that it infringes Nichia’s patents and that it failed to prove the patents invalid. We affirm. BACKGROUND I. Nichia Corporation is an LED company that manufac- tures and supplies LEDs in markets around the world. Nichia Corp. v. Everlight Elecs. Co., No. 02:13-CV-702, 2016 WL 310142, at *1 (E.D. Tex. Jan. 25, 2016) (“Nichia”). Both parties agree that “Nichia is the world’s largest supplier of LEDs.” J.A. 2113, ¶ 154. It sells LEDs in America through its subsidiary Nichia America Corp. Nichia also researches and develops LED technology, including the technology disclosed in the three patents Nichia asserted in this case. Everlight buys chips from suppliers and packages them into LEDs. Nichia, 2016 WL 310142, at *1. It sells LEDs in the U.S. directly to customers and through its subsidiaries. Id. NICHIA CORPORATION v. EVERLIGHT AMERICAS, INC. 3 II. Nichia accused Everlight of infringing three of Nichia’s patents, U.S. Patent Nos. 8,530,250, 7,432,589, and 7,462,870. All three disclose package designs and methods of manufacturing LED devices. All three patents use a shared set of vocabulary known in the art, as shown below on a common configuration of an LED: Id. at *4; J.A. 11. The court explained that this LED includes the following parts: (i) the “leads,” which are used to conduct the elec- trical current to the LED chip; (ii) the “resin hous- ing,” which is made out of a reflective resin and includes a recess in which the LED chip is placed; (iii) the “LED chip” or “LED die” (about the size of a grain of salt), which is mounted in the recess typically by using an adhesive material in a pro- cess known as die bonding; (iv) one or more “bond wires” that connect the LED chip to the leads; and (v) an “encapsulation material” that encapsulates the LED chip and protects it from the environ- ment. Nichia, 2016 WL 310142, at *4. 4 NICHIA CORPORATION v. EVERLIGHT AMERICAS, INC. The LEDs in suit are miniscule; they are typically smaller than 1 millimeter in height. Id. They are used in LCD backlights, video displays, automotive applications, and general lighting applications. Id. The court found that LED design technology is a com- plex technological space, where many design considera- tions pull in different directions simultaneously. It found that “LED package design involves the simultaneous integration and balancing of multiple design considera- tions, including electrical, optical, thermal, and mechani- cal design challenges.” Id. The court emphasized that: [m]ultiple challenges must be addressed when de- signing an LED package: (i) electrical design chal- lenges: We have to conduct a relatively high- current density through the small LED chip and connect the LED chip to the leads; (ii) optical de- sign challenges: The intensities are very high, be- cause the LED chip is very small and the power emitted by the LED is quite high. And, therefore, we need to handle a very high-optical radiation density; (iii) thermal design challenges: The LED chip inevitably creates heat, and this heat needs to be conducted away; and (iv) mechanical design challenges: includes protecting the LED chip from any external effect, such as moisture or mechani- cal intrusion. These multiple requirements can be contradictory and can pull the design in differ- ent directions. Id. (internal emphases, citations, and quotations omitted). The district court held a bench trial and found that Everlight infringed all three patents and had failed to prove by clear and convincing evidence that the asserted NICHIA CORPORATION v. EVERLIGHT AMERICAS, INC. 5 claims of the three patents are invalid. 1 Id. at *1. De- spite finding the patents valid and infringed, the court refused Nichia’s request for prospective relief in the form of a permanent injunction. Id. The court explained that “Nichia has not demonstrated that Defendants’ past and continuing infringement of Nichia’s Patents has caused, and will continue to cause, irreparable harm to Nichia.” Id. It also reasoned that monetary damages could ade- quately compensate Nichia for Everlight’s infringement. The court thus concluded that Nichia was not entitled to injunctive relief. Id. Nichia timely appealed, and Everlight cross-appealed. Nichia appeals the district court’s refusal to grant the injunction. Everlight cross-appeals the district court’s judgment that Everlight infringes and that it failed to prove the patents invalid with respect to all of the assert- ed claims of Nichia’s three asserted patents. We have jurisdiction under 28 U.S.C. § 1292(c)(2). DISCUSSION I. We begin with Everlight’s appeal of the district court’s finding that Everlight infringed the asserted claims of Nichia’s three patents and its conclusion that Everlight failed to prove those claims invalid by clear and convinc- ing evidence. We review the court’s findings of fact for clear error and its legal conclusions de novo. Allergan, Inc. v. Apotex Inc., 754 F.3d 952, 961 (Fed. Cir. 2014). “A finding is 1 The district court’s opinion contains a thorough background of this case and explanation of LED manufac- turing technology. See Nichia, 2016 WL 310142. This opinion includes an abbreviated recitation of the facts relevant to our disposition. 6 NICHIA CORPORATION v. EVERLIGHT AMERICAS, INC. ‘clearly erroneous’ when although there is evidence to support it, the reviewing court on the entire evidence is left with the definite and firm conviction that a mistake has been committed.” United States v. U.S. Gypsum Co., 333 U.S. 364, 395 (1948). “Where the district court’s claim construction relies only on intrinsic evidence, the construction is a legal determination reviewed de novo.” Ruckus Wireless, Inc. v. Innovative Wireless Sols., LLC, 824 F.3d 999, 1002 (Fed. Cir. 2016) (citing Teva Pharm. USA, Inc. v. Sandoz, Inc., 135 S. Ct. 831, 841 (2015)). Infringement is a question of fact. Golden Blount, Inc. v. Robert H. Peterson Co., 438 F.3d 1354, 1361 (Fed. Cir. 2006). “Obviousness is a question of law based on under- lying questions of fact.” Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007). A. We begin with the ’250 patent. The district court found claims 1, 7, 17, 19, and 21 of the patent infringed and not proven invalid. Everlight first challenges the court’s construction of the claim term “lead” and its find- ing of infringement under its proposed construction. Second, it challenges the court’s construction of “planar” and the court’s finding of infringement under either its proposed construction or the court’s. Finally, Everlight challenges the court’s conclusion that it failed to prove the patent obvious. 1. The ’250 patent is directed to a process for manufac- turing LEDs that purportedly improves production effi- ciency. The patent describes making a continuous sheet of LEDs and separating, or “singulating,” them to make the final product. ’250 patent col. 2 ll. 49–53. During singulation, LEDs often break. So to reduce breakage, the patent suggests manufacturing LEDs by fitting a lead frame between an upper and lower mold, filling the molds with resin, and then singulating the LEDs. This, the NICHIA CORPORATION v. EVERLIGHT AMERICAS, INC. 7 patent suggests, is a “simple and low-cost method for manufacturing, in a short time, multiple light emitting devices which ha[ve] high adhesion between a lead frame and a thermosetting resin composition.” Id. The district court noted that, “[b]etween 2010 and 2013, Nichia’s sales of the products that practice the ’250 patent increased from three percent of Nichia’s total sales volume, to 27 percent.” Nichia, 2016 WL 310142, at *24. The court also explained that, “[i]n 2013, Nichia sold over 13.9 billion units, with revenues of $1.7 billion.” Id. The ’250 patent’s first claim is reproduced below: 1. A method of manufacturing a light emitting de- vice, the method comprising: providing a lead frame comprising at least one notch; plating the lead frame; after plating the lead frame, providing an up- per mold on a first surface of the plated lead frame and a lower mold on a second surface of the plated lead frame, and transfer-molding a thermosetting resin containing a light reflect- ing material in a space between the upper mold and the lower mold to form a resin- molded body; and cutting the resin-molded body and the plated lead frame along the at least one notch to form a resin package, the resin package comprising a resin part and at least one lead, and the cut- ting step being performed such that an outer surface of the resin part and an outer surface of the at least one lead are planar at an outer side surface of the resin package, 8 NICHIA CORPORATION v. EVERLIGHT AMERICAS, INC. wherein the plated lead frame is cut so as to form an unplated outer side surface on the lead. ’250 patent col. 19 ll. 37–55. 2. Everlight argues that the court misconstrued the term “lead” when it interpreted “lead” to mean “the portion of the device that conducts electricity.” J.A. 10054–55. Everlight contends that a lead must be more than simply conductive, it must be “the conductive portion of the device that makes an electrical connection to a structure outside of the device.” J.A. 10054 (originally proposing this construction). The district court rejected Everlight’s request to add a requirement that the lead electrically connect to a structure outside of the device because, while the court “generally agree[d] with the conductive portion of [Everlight’s] construction,” it found “the remaining language problematic and not as concise as the Court’s construction.” J.A. 10056. We agree with the district court that a lead, as em- ployed in the asserted claims of the ’250 patent, is “the portion of the device that conducts electricity.” The specification discloses leads 22 in Figure 1: NICHIA CORPORATION v. EVERLIGHT AMERICAS, INC. 9 ’250 patent, Fig. 1. The specification explains that “[t]he light emitting element 10 is electrically connected with the leads 22 through wires 50.” Id. at col. 6 ll. 20–21. It explains that the lead frame “is formed using an electrical [sic] good conductor such as iron, phosphor bronze or a copper alloy.” Id. at col. 9 ll. 21–22. These disclosures explain that the claimed leads conduct electricity. But we find no compelling support in the intrinsic evidence for Everlight’s proposed requirement that the leads conduct electricity from outside the device. We thus agree with the district court that the person of ordinary skill would understand a lead to be “the portion of the device that conducts electricity.” Because we agree with the court’s construction, and because Everlight does not challenge the court’s finding of infringement under that construction, we affirm the court’s finding that the accused products meet this limita- tion. 3. We next turn to Everlight’s contention that the dis- trict court misconstrued “planar” when it interpreted the term “planar” as “in a substantially same plane.” J.A. 10069. The ’250 patent’s claims require that “at least one lead [be] planar at an outer side surface of the resin package.” Everlight argues that “planar” means that there is “no measurable surface variation.” J.A. 10068. Everlight asserts that this construction is mandated by the specifi- cation’s distinction between “planar” and “in the same plane.” Everlight Br. 23. Namely, the patent uses “in a substantially same plane” in the specification but “planar” in the claims. The specification states that “a resin part and a lead are formed in a substantially same plane in an outer side surface.” ’250 patent col. 2 l. 63 – col. 3 l. 1. The claims, however, recite “an outer surface of the resin part and an outer surface of the at least one lead are 10 NICHIA CORPORATION v. EVERLIGHT AMERICAS, INC. planar at an outer side surface.” Id. at col. 19 ll. 50–52 (claim 1) (emphasis added). Everlight argues that the patent owner’s choice to use “in a substantially same plane” in the specification but “planar” in the claims mandates that we treat the two terms differently. We disagree. First, Everlight’s argument implies a rule that we decline to adopt here, namely, that if differ- ent words are used in the claim and specification, then we must read that distinction as an intended difference. We recognize that, in some patents, a distinction between terms may imply a difference in meaning, but this is no hard-and-fast rule. Rather, some inventors might use one term in the specification to inform the meaning of another term in the claims. See SAS Inst., Inc. v. Complemen- tSoft, LLC., 825 F.3d 1341, 1348 (Fed. Cir. 2016). For one word to inform the meaning of another, the words need not be identical. See id. For example, in SAS Institute, we held that the term “graphical representation of a data flow” in the claims and the term “data flow diagram” in the specification were commensurate in scope. Id. So too here. Reading the claims in light of the specification, we conclude that the claimed term “planar” is commensurate in scope with the specification’s discussion of “in a sub- stantially same plane.” We therefore agree with the court’s conclusion that “planar” means “in a substantially same plane.” Because we agree with the court’s construction, we next consider Everlight’s argument that it does not in- fringe even under that construction. Everlight Br. 23. Everlight argues that “the outer side surfaces of the three package groups are not ‘planar’ because each of the outer side surfaces of the LED packages has a significant con- cave portion.” Id. at 23–24 (citing J.A. 10347–57). Ever- light presents three cross-sectional views of the alleged infringing devices, each showing two leads with flat sections connected by slight concavities. NICHIA CORPORATION v. EVERLIGHT AMERICAS, INC. 11 We find Everlight’s argument unconvincing. Under the correct construction, the leads need not be perfectly flat; they need only be “in a substantially same plane” as the outer surface of the resin. The leads here are “in a substantially same plane” as the outer surface of the resin; slight concavities do not mandate a finding other- wise. We thus see no clear error in the court’s finding that Everlight’s accused products infringe the “planar” limitation. 2 4. Everlight also argues it proved the ’250 patent invalid for obviousness, despite the district court’s holding other- wise. Specifically, Everlight asserts that the patent is rendered obvious by “Hitachi,” Japanese Patent Pub. Tokukai No. 2007-235085, in combination with “Sanyo,” Japanese Patent Pub. Tokukaihei 2011-191562, or “Glenn,” U.S. Patent No. 6,433,277. Hitachi discloses a method for producing a semicon- ductor device on a circuit board or lead frame. Nichia, 2016 WL 310142, at *8. The district court found that Hitachi failed to disclose several elements of the ’250 patent’s claims. Claim 1 requires a “notch” and “cutting the resin-molded body and the plated lead frame along the at least one notch to form a resin package,” ’250 patent col. 19 ll. 47–48 (claim 1), neither of which Hitachi discloses. Nichia, 2016 WL 310142, at *17. These find- ings are supported by expert testimony, J.A. 20797–98 (Schubert), and by Hitachi itself, J.A. 10249 (Fig. 6, showing dicing lines, 20). Indeed, Hitachi is criticized in 2 Everlight also argues that the district court wrongly found it infringed claims 1 and 7 under § 271(g). Because Everlight’s products directly infringe claims of the ’250 patent under § 271(a), we do not reach whether Everlight also infringed claims under § 271(g). 12 NICHIA CORPORATION v. EVERLIGHT AMERICAS, INC. the ’250 patent’s specification for having a design that results in detachment of the packaging resin from the lead frame during singulation. See ’250 patent col. 2 ll. 18–19, 30–35 and Fig. 19(a) (reproduced from Hitachi). The ’250 patent solves this problem by providing a manu- facturing method and LED device in which the lead frame has “notch[es]” and “the thermosetting resin is filled in the notch parts, and therefore an adhering area between the lead frame and the thermosetting resin becomes large, so that it is possible to improve adhesion.” Id. at col. 3 ll. 8–12. We thus conclude that, despite Everlight’s arguments to the contrary, these findings are not clearly erroneous. Everlight argues that it would have been obvious to combine Hitachi with Glenn and Sanyo to achieve the claimed invention. Glenn discloses a method of making packages for integrated circuit dies. Nichia, 2016 WL 310142, at *19. Sanyo is directed to a method for produc- ing a semiconductor device. Id. The court found that a person of ordinary skill would not have considered Glenn or Sanyo to modify Hitachi because “the different considerations in the design and manufacture of electronic and optoelectronic [e.g., LED] devices result in substantial differences in the manufac- turing processes and materials used in the different technologies,” and “a change in the design or manufacture of an LED or other optoelectronic device requires the consideration of factors—including factors such as light emission, and the effects of heat and emitted radiation on different resins and other materials—that are not rele- vant to the design and manufacture of electronic semicon- ductor devices.” Id. at *21. These findings are supported by expert testimony, in- cluding Everlight’s expert’s admission that electronic device technology is not particularly relevant to LED technology. J.A. 20543–44. Because the weight of the NICHIA CORPORATION v. EVERLIGHT AMERICAS, INC. 13 evidence supports the court’s finding that there was no motivation to combine these references, we affirm the court’s conclusion that Everlight failed to prove that the ’250 patent would have been obvious. B. We next examine the ’870 patent. Again, Everlight challenges the district court’s determination that it in- fringes and that it did not prove the patent obvious. 1. The ’870 patent discloses an LED design that pur- portedly minimizes structural problems caused by compo- nents expanding and contracting at different rates during thermal cycling. ’870 patent col. 1 ll. 38–49. The design is a molded package with “a specific feature, a wall por- tion,” that separates the positive and negative leads. Nichia, 2016 WL 310142, at *36 (internal quotation omitted). “[T]his wall portion improves structural integri- ty, particularly if the device is subject to temperature variations so that package cracking, detachment of the encapsulation material, and warping of the package is reduced or avoided.” Id. (internal quotation omitted). The package also includes a semiconductor, such as a light emitting semiconductor. Claim 7 is reproduced below: 7. A light emitting device comprising: a light emitting element; a molded member having a recess formed therein by a bottom surface and a side surface so as to mount said light emitting element in substantially a center of the recess; a positive lead electrode partially disposed on the bottom surface and adjacent to the side surface in the recess and extending outwardly from said molded member; 14 NICHIA CORPORATION v. EVERLIGHT AMERICAS, INC. a negative lead electrode partially disposed on the bottom surface and adjacent to the side surface in the recess and extending outwardly from said molded member; means for electrically connecting said light emitting element to said positive lead elec- trode, and said light emitting element to said negative lead electrode; wherein a portion of said positive lead elec- trode and a portion of said negative lead elec- trode in the recess are separated from each other by a wall portion; wherein said wall por- tion extends inwardly in a direction toward the center of the recess. ’870 patent col. 35 ll. 22–42. 2. Everlight argues that its products do not meet the ’870 patent’s requirement that its positive and negative lead electrodes are “partially disposed” on the bottom surface of a recess. Specifically, Everlight claims that the court wrongly defined the “bottom” of the recess in its products. The recess’s bottom, it argues, extends to the uppermost extension of resin. This bottom is a flat line. Everlight does not dispute, however, that shallow gaps in the resin expose the leads. The court repeatedly rejected Everlight’s position and found the disputed element met. Nichia, 2016 WL 310142, at *39–48. In reaching this conclusion, the court repeatedly credited Nichia’s expert. See, e.g., id. at *30. We discern no clear error in the court’s conclusion. But even more, we find Everlight’s position belied by the patent itself. The ’870 patent discloses several embodi- ments where the bottom of the recess is multi-featured. See, e.g., ’870 patent Figs. 1, 6, 11. Despite Everlight’s claim to the contrary, the recess is not flat. See id. The NICHIA CORPORATION v. EVERLIGHT AMERICAS, INC. 15 bottom of the recess, then, is also not flat. Everlight’s straight-line recess oversimplifies the analysis—the recess need not be perfectly flat. In turn, the court cor- rectly concluded that Everlight’s products infringe where the leads are exposed through gaps in the resin. Ever- light’s products include these gaps, and thus the district court properly concluded that the products meet this claim limitation. As Everlight brings no other challenge on this issue, we affirm the district court as to Everlight’s infringement of the ’870 patent. 3. Everlight also challenges the court’s conclusion that it failed to prove the ’870 patent invalid. Everlight had asserted that the ordinary artisan would have combined “Waitl,” U.S. Patent No. 6,624,491, and “Nitta,” U.S. Patent No. 6,747,293, to render the ’870 patent claims obvious. Everlight first challenges the court’s conclusion that Waitl does not disclose all of the claim elements. It second challenges the court’s conclusion that the artisan would not have looked to Nitta to remedy Waitl’s deficien- cies. Waitl notes that separation can result when different materials expand at different rates, so it teaches designs to help minimize separation. Nichia, 2016 WL 310142, at *49. Entitled “diode housing,” Waitl “is directed to prob- lems in the operation of a device stemming from delami- nation—a situation in which the ‘window’ encapsulant material separates from the metal frame of the device.” Id. Waitl’s device includes a lead electrode with a single exposed area, id., but the claims require the lead elec- trode to have two exposed portions, one positive and one negative, separated by a wall. The court found that Waitl failed to disclose elements related to these positive and negative electrodes as claimed in the ’870 patent. Ever- light does not challenge the court’s reading of Waitl. 16 NICHIA CORPORATION v. EVERLIGHT AMERICAS, INC. Everlight instead argues that a person of ordinary skill in the art would have been motivated to modify Waitl in light of Nitta to achieve the claimed invention. Nitta appears to disclose a wall between two electrodes, as it is directed to a light emitting device with a “plurality of chips efficiently disposed” in a housing with a “lead hav- ing a slit formed between a portion for bonding a wire to and a portion for mounting chips on, thereby to prevent extrusion of an adhesive and eliminate defective bonding.” Id. at *50 (quoting Nitta, Abstract). But the court found that a person of ordinary skill in the art would have had no motivation to modify Nitta in light of Waitl. We agree. The court found that the refer- ences disclose different structures, resolve dissimilar problems, and propose dissimilar solutions. Id. at *51–53. The court’s conclusion derives further support from its earlier finding that artisans in this field face myriad design challenges because small design changes may cause unpredictable results and because design considera- tions often pull in multiple directions. Id. at *4. We determine that the court’s finding on motivation to com- bine is not clearly erroneous. We thus affirm the district court’s conclusion that Everlight failed to prove the ’870 patent invalid as obvious. C. We now reach the ’589 patent, the third and final pa- tent Nichia asserted against Everlight. The court found Everlight infringed claims 1 and 2 of the ’589 patent and that Everlight had failed to prove the patent invalid. Everlight again appeals the court’s holdings on infringe- ment and validity. 1. The ’589 patent is also directed to the design of a sem- iconductor device. The disclosed design seeks to prevent adhesive from overflowing into other areas of the device. NICHIA CORPORATION v. EVERLIGHT AMERICAS, INC. 17 Specifically, the ’589 patent states that “an object of the present invention is to provide a semiconductor device wherein the adhesive components do not overflow nor leak to the wire bonding area even when . . . adhesive components having low surface tension [are] used in the adhesive layer for die bonding, and the overflow and leak preventing function can be maintained satisfactorily even when the device is made smaller and thinner.” ’589 patent col. 2 ll. 60–67. Claim 1 of the ’589 patent requires the following: 1. A semiconductor device comprising: a semiconductor element having a pair of elec- trodes; a housing having a recess for accommodating the semiconductor element; a first lead electrode and a second lead elec- trode exposed on the bottom surface of said re- cess; an adhesive layer for die bonding between the semiconductor element and the first lead elec- trode; and electrically conductive wires for wire bonding between one electrode of the pair of electrodes of the semiconductor element and the first lead electrode and between the other electrode and the second lead electrode; wherein the housing has at least one wall formed to extend across the bottom surface of the recess so as to divide the surface of the first lead electrode into a die bonding area and a wire bonding area; the first lead electrode has a notch which is formed by cutting off a portion of an edge of 18 NICHIA CORPORATION v. EVERLIGHT AMERICAS, INC. the first lead electrode and located at least just below the wall; and the wall and the bottom portion of said hous- ing are connected to each other through the notch. Id. at col. 15 l. 59 – col. 16 l. 13. 2. Everlight challenges the court’s finding that it in- fringes the ’589 patent with the same arguments that it made against its infringement of the ’870 patent. Ever- light Br. 32–33. For the same reasons we affirmed the court’s infringement finding with respect to the ’870 patent, we affirm its finding of infringement with respect to the ’589 patent. See, supra, Discussion B.2. 3. Everlight also challenges the court’s conclusion that it did not prove the ’589 patent invalid by asserting that it would have been obvious to a person of ordinary skill in light of “Nakashima,” U.S. Patent Pub. No. 2004/0256706, and “Kim,” U.S. Patent Pub. No. 2006/0170083. Nakashima discloses “a molded package for an LED device that reduces the likelihood of delamination—that is, detachment of the encapsulating resin from the pack- age.” Nichia, 2016 WL 310142, at *32. The device has a circular recess and three exposed metal members. Id. The court found that Nakashima failed to disclose a wall that divides the surface of a lead electrode, a notch in the lead, and a few other claimed features. Id. at *33. Kim discloses a side-view LED designed to enhance the flow of resin into the side wall. Id. at *34. Kim explains that, to achieve these dimensions, “endeavors have been made to reduce the thickness of the upper and lower wall parts around an LED window. However, reducing the wall part thickness is an extremely difficult NICHIA CORPORATION v. EVERLIGHT AMERICAS, INC. 19 task. This task also potentially weakens wall strength thereby failing to ensure reliability.” Id. (quoting Kim, ¶ [0006]). The court found Kim failed to meet several of the ’589 patent’s claimed features, including having a wall across the bottom of the recess. Id. at *34–35. The court also found that a person of ordinary skill in the art would not have been motivated to combine Nakashima and Kim. Specifically, it found that the two references “are not directed to similar packages,” and “describe different structures”: “Kim relates to thin, side- view LEDs, while Nakashima relates to a top-view LED with a recess that includes three metal members partially covered by a wall portion.” Id. at *35. Moreover, the court found that the two references “address different problems in packaging structures and disclose different solutions”: “Kim contemplates that the structure that promotes resin flow will be embedded in the body of the package itself,” while “Nakashima is concerned about delamination of the encapsulant material as a result of different coefficients of thermal expansion among the different package materials.” Id. We conclude that these findings are not clearly erroneous and are supported by the weight of the evidence. See, e.g., J.A. 20785–86. We thus affirm the district court’s conclusion that one of ordinary skill in the art would not have been motivated to combine these two references and thus the references did not render the ’589 patent obvious. II. Finally, Nichia challenges the district court’s decision to deny its request for permanent injunctive relief. The district court held that Nichia failed to show that it had suffered irreparable harm and that remedies at law provided Nichia inadequate compensation. Nichia, 2016 WL 310142, at *65–67. Nichia challenges both conclu- sions. Because we affirm the court’s conclusion on irrepa- 20 NICHIA CORPORATION v. EVERLIGHT AMERICAS, INC. rable harm, we do not reach the adequacy of monetary damages. A. We review a district court’s grant or denial of a per- manent injunction for an abuse of discretion. Robert Bosch LLC v. Pylon Mfg. Corp., 659 F.3d 1142, 1149 (Fed. Cir. 2011). “We may find an abuse of discretion on a showing that the court made a clear error of judgment in weighing relevant factors or exercised its discretion based upon an error of law or clearly erroneous factual find- ings.” Innogenetics, N.V. v. Abbott Labs., 512 F.3d 1363, 1379 (Fed. Cir. 2008) (internal quotation marks omitted). A permanent injunction is an equitable remedy. Weinberger v. Romero-Barcelo, 456 U.S. 305, 311 (1982). “It ‘is not a remedy which issues as of course,’ or ‘to re- strain an act the injurious consequences of which are merely trifling.’” Id. (citation omitted) (quoting Harrison- ville v. W.S. Dickey Clay Mfg. Co., 289 U.S. 334, 337–38 (1933) and Consol. Canal Co. v. Mesa Canal Co., 177 U.S. 296, 302 (1900)). “According to well-established principles of equity, a plaintiff seeking a permanent injunction must satisfy a four-factor test before a court may grant such relief.” eBay Inc. v. MercExchange, L.L.C., 547 U.S. 388, 391 (2006). A party seeking an injunction must demonstrate: “(1) that it has suffered an irreparable injury; (2) that remedies available at law, such as monetary damages, are inadequate to compensate for that injury; (3) that, consid- ering the balance of hardships between the plaintiff and defendant, a remedy in equity is warranted; and (4) that the public interest would not be disserved by a permanent injunction.” Id. Historically, “courts have granted injunctive relief up- on a finding of infringement in the vast majority of patent cases.” Id. at 395 (Roberts, J., concurring). That this long NICHIA CORPORATION v. EVERLIGHT AMERICAS, INC. 21 history exists “is not surprising” given the nature of patent rights. Id. Patent rights are property rights, and central to those rights is the right to exclude. Florida Prepaid Postsecondary Educ. Expense Bd. v. Coll. Sav. Bank, 527 U.S. 627, 642–43 (1999); see also Thomas W. Merrill, Property and the Right to Exclude, 77 Neb. L. Rev. 730, 740–52 (1998) (discussing the “primacy of the right to exclude”). The Supreme Court often reaffirms this principle—that “the right to exclude others” is “one of the most essential sticks in the bundle of rights that are commonly characterized as property.” Kaiser Aetna v. United States, 444 U.S. 164, 176 (1979); see also Dolan v. City of Tigard, 512 U.S. 374, 384 (1994); Nollan v. Cal. Coastal Comm’n, 483 U.S. 825, 831 (1987). Our court has similarly observed that “[w]hile a patentee is not entitled to an injunction in every case, ‘it does not follow that courts should entirely ignore the fundamental nature of patents as property rights granting the owner the right to exclude.’” Presidio Components, Inc. v. Am. Tech. Ceram- ics Corp., 702 F.3d 1351, 1363 (Fed. Cir. 2012) (quoting Robert Bosch, 659 F.3d at 1149). But an injunction in patent law must be justified like any other: “the moving party must satisfy the court that relief is needed.” United States v. W. T. Grant Co., 345 U.S. 629, 633 (1953). The movant must prove that it meets all four equitable factors. i4i Ltd. P’ship v. Mi- crosoft Corp., 598 F.3d 831, 861 (Fed. Cir. 2010). And it must do so on the merits of its particular case. eBay, 547 U.S. at 391. B. Nichia challenges the district court’s finding that it failed to establish that it will suffer irreparable harm absent an injunction. The court’s conclusion relied on several findings, each weighing against Nichia. Specifi- cally, the court found that “[t]he record shows an absence of meaningful competition.” Nichia, 2016 WL 310142, 22 NICHIA CORPORATION v. EVERLIGHT AMERICAS, INC. at *65. It found that Nichia had “failed to establish past irreparable harm, or the likelihood of irreparable harm in the future based on lost sales” or “based on price erosion.” Id. at *66. It found that Nichia’s licensing of the patents to major competitors suggested that harm from “in- fringement of the patents-in-suit is not irreparable.” Id. And it found that Nichia’s licensing practices have made “multiple low-priced non-infringing alternatives from competitors available to replace the accused Everlight products if such products were not available.” Id. Nichia contests these findings. Nichia first argues that the court abused its discretion when it found a lack of “meaningful competition” between the parties. Nichia asserts that the court should have deferred to the parties’ stipulation that “Nichia and Everlight are competitors.” J.A. 2112, ¶ 148. It further claims that the trial record “abounds” with Everlight documents identifying Nichia as a competitor. Nichia Br. 34. It points to internal Everlight documents identify- ing Nichia as a competitor, J.A. 2222, 2466–69, 3007–08, and an Everlight Annual Report identifying Nichia as a “major competitor,” J.A 2783–84, 2788. And it argues that Everlight stipulated that it targeted some of Nichia’s customers with offers to sell infringing products. J.A. 2113–14, ¶¶ 158–64. Nichia contends that these showings undermine the district court’s finding that Nichia and Everlight are not meaningful competitors. Nichia also argues that the court misunderstood the LED market. Nichia claims that this market is a “design- win” market where customers require suppliers like Everlight and Nichia to “design-in” a product before receiving an order. J.A. 20254–61 (Swenson); J.A. 20424 (Kammerer); J.A. 20304 (Liu) (“For the end customer, there—there has to be some sort of design-in before there’s an order.”); J.A. 20315 (Liu) (“You—you have to get designed-in to be able to get an order.”). During the “design in” process, customers test and certify LEDs, NICHIA CORPORATION v. EVERLIGHT AMERICAS, INC. 23 which leads to a reticence to substitute competing LEDs for the product’s life cycle. Nichia argues that this char- acteristic of the LED market makes it likely that in- fringement will cause long-term, irreparable harm. We disagree, not because we question the facts as Nichia presents them, but because the court heard these arguments as the original finder of fact and concluded to the contrary, carefully weighing both parties’ evidence. The court found that Nichia is an LED chip manufacturer as well as a packager, “while Everlight is solely an LED packager.” Nichia, 2016 WL 310142, at *53. The court also found that the two companies generally sell to differ- ent parties: “Everlight generally sells to distributors rather than directly to customers, as Nichia does.” Id. Moreover, despite the parties’ stipulation that they com- peted in the same market, J.A. 2112, ¶ 148, the court found that Nichia failed to prove that this competition was meaningful, Nichia, 2016 WL 310142, at *65. The court explained that Everlight’s competition accounted for “the proverbial ‘drop in the bucket,’” when compared to Nichia’s total sales. Id. Nichia identified 516 sales oppor- tunities, with Everlight as a competitor in only 3. Id. In light of these findings, the court noted that there was “a very small area of possible competition,” but it concluded that there was an “absence of actual competition.” Id. The court closed its market-competition analysis by observing that the “justification for an injunction is re- mote indeed.” Id. The court also disagreed with Nichia’s contention that it would suffer future irreparable harm because of past lost sales. Id. at *66. The court found that Nichia “failed to establish that [Everlight was] responsible for causing a single lost sale in the U.S.” Id. Nichia claimed one in- stance of a lost sale, but the court concluded that the evidence showed “several other formidable, lower-priced, and licensed competitors for the same opportunity.” Id. Additionally, Nichia’s expert “admitted he made no at- 24 NICHIA CORPORATION v. EVERLIGHT AMERICAS, INC. tempt to establish ‘but for’ causation that Nichia America would have made the sale . . . in the absence of Everlight’s claimed infringement.” Id. In short, Nichia did not prove that it had suffered even a single lost sale from Ever- light’s infringement. Nichia also had alleged that it suffered price erosion because of Everlight’s infringement in a sale to General Electric. While Nichia eventually won the GE contract, it sold its products at a price lower than it originally offered. J.A. 20266–69. Nichia presented evidence that it had lowered its price to compete against Everlight’s infringe- ment and that this infringement caused this price erosion. The court disagreed. Nichia, 2016 WL 310142, at *66. It explained that Nichia’s lower-price sale to GE had been required by GE, so “Nichia was going to have to lower its prices, regardless of Everlight’s competition.” Id. Fur- ther, the court found that several licensed competitors had offered products at lower prices, independent of Everlight, which drove down prices. The court further pointed to Nichia’s admission that it had already sold LEDs at the lower price to GE’s competitors in the same period and that this lower price made it “impossible to maintain” a higher price with GE. Id. And the court credited Nichia’s expert’s admission that the evidence was insufficient to establish price erosion and that he did not attempt a price-erosion analysis. The court concluded that, in light of these evidentiary deficiencies, Nichia “cannot establish that Everlight was the ‘but for’ cause of its claimed price erosion.” Id. We find no clear error in the court’s finding that Nichia failed to establish price erosion from Everlight’s infringement. Nichia further contests the court’s findings with re- spect to Nichia’s licensing activities. Nichia argues that the court wrongly found that its licensing activities pre- cluded a finding of irreparable harm. Nichia argues that NICHIA CORPORATION v. EVERLIGHT AMERICAS, INC. 25 the court’s decision is contrary to settled law, as it applies a categorical rule that licenses preclude irreparable harm. To the extent the court adopted a categorical rule, we agree with Nichia; such a rule would run afoul of our precedent. We have explained, for example, that “[a] plaintiff’s past willingness to license its patent is not sufficient per se to establish lack of irreparable harm if a new infringer were licensed.” Acumed LLC v. Stryker Corp., 551 F.3d 1323, 1328 (Fed. Cir. 2008) (citing eBay, 547 U.S. at 393). But to the extent that the court found that Nichia’s prior licenses weighed against a finding of irreparable harm, we countenance that approach. While evidence of licensing activities cannot establish a lack of irreparable harm per se, that evidence can carry weight in the irrepa- rable-harm inquiry. We have previously explained that “[t]he fact of the grant of previous licenses, the identity of the past licensees, the experience in the market since the licenses were granted, and the identity of the new infring- er all may affect the district court’s discretionary decision concerning whether a reasonable royalty from an infring- er constitutes damages adequate to compensate for the infringement.” Id. The court’s findings on licensing traversed these considerations. The court found that several of Nichia’s licenses were to “significant competi- tors” who posed “major threats” to Nichia’s flagship products. Nichia, 2016 WL 310142, at *66. And the court found that these licenses changed the market by making available “multiple low-priced non-infringing alterna- tives.” Id. These findings, the court concluded, supported a finding that “Nichia ha[d] failed to establish it will suffer irreparable harm in the absence of an injunction.” Id. In any event, regardless of the court’s analysis of the licenses, we note that the court treated Nichia’s licenses as an independent ground for denying the injunction. Id. 26 NICHIA CORPORATION v. EVERLIGHT AMERICAS, INC. It did not rely on Nichia’s licenses in its earlier analysis of irreparable harm, but rather found the licenses to further bolster its prior finding. Id. The court’s licensing analy- sis thus does not undermine its separate findings that Nichia failed to establish market competition, lost sales, and price erosion, and that these failures all weigh against a conclusion that Nichia would suffer irreparable harm absent an injunction. Id. We discern no clear error in the district court’s finding that Nichia failed to prove that it would suffer irreparable harm absent the injunction. On that traditional equitable factor, Nichia did not bear its burden. See W. T. Grant Co., 345 U.S. at 633. Because Nichia failed to establish one of the four equitable factors, the court did not abuse its discretion in denying Nichia’s request for an injunc- tion. CONCLUSION We discern no error in the court’s conclusions that Everlight infringed all asserted claims and failed to prove those claims invalid by clear and convincing evidence. We also conclude that the court did not abuse its discretion in denying Nichia’s request for a permanent injunction. We therefore affirm. AFFIRMED COSTS No costs.