Slip Op. 17 -
UNITED STATES COURT OF INTERNATIONAL TRADE
:
ADC TELECOMMUNICATIONS, INC., :
:
Plaintiff, :
:
v. : Before: R. Kenton Musgrave, Senior Judge
: Court No. 13-00400
UNITED STATES, :
:
Defendant. :
:
OPINION
[On Customs’ classification of certain value added modules, plaintiff’s motion for summary
judgment denied; defendant’s cross motion for summary judgment granted.]
Decided: October , 2017
Michael E. Roll and Brett Ian Harris, Pisani & Roll LLP, of Los Angeles, CA, for the
plaintiff.
Guy R. Eddon, Trial Attorney, Commercial Litigation Branch, Civil Division, U.S.
Department of Justice, of New York, NY, for the defendant. On the brief were Benjamin C. Mizer,
Principal Deputy Assistant Attorney General, Jeanne E. Davidson, Director, and Amy M. Rubin,
Assistant Director. Of counsel on the brief was Beth C. Brotman, Attorney, Office of the Assistant
Chief Counsel, U.S. Customs and Border Protection, of New York, NY.
Musgrave, Senior Judge: This test case is before the court on cross-motions for
summary judgment on the proper customs classification of a single entry of three types of “Value
Added Modules” (“VAMs”) imported from Mexico in June 2012. The plaintiff claimed to U.S.
Customs and Border Protection (“Customs”) that its VAMS are classifiable in Harmonized Tariff
Schedule of the United States (“HTSUS”), subheading 8517.62.00, as “machines for the reception,
conversion and transmission or regeneration of voice, images or other data”, duty-free. Customs
Court No. 13-00400 Page 2
classified the VAMS in NY L80881 (Dec. 1, 2004) and at liquidation as “other optical appliances
and instruments” within subheading 9013.80.90, HTSUS, and assessed customs duties of 4.5
percent. Upon denial of its protest, number 2402-13-100078, the plaintiff brought this suit. Having
fulfilled the prerequisites therefor, 28 U.S.C. §2637(a), jurisdiction is proper pursuant to 28 U.S.C.
§1581(a).
For the following reasons, judgment will be entered in favor of the defendant.
I. Standard of Review
The court hears de novo a civil action contesting the denial of a protest under section
515 of the Tariff Act of 1930 on the basis of the record made before the court. See 28 U.S.C.
§2640(a)(1). On such actions, summary judgment is appropriate when “there is no genuine dispute
as to any material fact and the movant is entitled to judgment as a matter of law.” USCIT R. 56(c).
“[W]here . . . a question of law is before the [c]ourt on a motion for summary judgment, the statutory
presumption of correctness is irrelevant.” Toy Biz, Inc. v. United States, 27 CIT 11, 17 (2003),
quoting Blakley Corp. v. United States, 22 CIT 635, 639, 15 F. Supp. 2d 865, 869 (1998). The court
“must consider whether the government’s classification is correct, both independently and in
comparison with the importer’s alternative.” Jarvis Clark Co. v. United States, 733 F.2d 873, 878
(Fed. Cir. 1984).
Determining the classification of imported merchandise is a two-step process. First,
the court must determine the meaning of relevant tariff provisions, a question of law, and second,
the court must determine whether the “nature” of the merchandise falls within the tariff provision
as properly construed, a question of fact. See, e.g., Orlando Food Corp. v. United States, 140 F.3d
1437 (Fed. Cir. 1998). “When the nature of the merchandise is undisputed . . . the classification
Court No. 13-00400 Page 3
issue collapses entirely into a question of law.” Cummins Inc. v. United States, 454 F.3d 1361, 1363
(Fed. Cir. 2006). See, e.g., Bausch & Lomb, Inc. v. United States, 148 F.3d 1363, 1365-66 (Fed. Cir.
1998); Clarendon Marketing, Inc. v. United States, 144 F.3d 1464, 1466 (Fed. Cir. 1998). Here, the
parties’ separate factual recitations do not reveal any material factual disputes, and the matter may
therefore be resolved summarily. In that analysis, a measure of deference is accorded to Customs
classification rulings in proportion to their “power to persuade”. United States v. Mead Corp., 533
U.S. 218, 235 (2001), citing Skidmore v. Swift & Co., 323 U.S. 134, 140 (1944).
II. Undisputed Facts
The parties aver as follows. The merchandise at issue consists of fiber optic
telecommunications network equipment. Plaintiff’s Rule 56.3 Statement of Material Facts Not in
Dispute (“Pl’s MFNID”), ECF No. 33, ¶1; Defendant’s Response to Plaintiff’s Statement of Material
Facts Not in Dispute (“Def’s MFNID”), ECF No. 38, ¶1. Fiber optic telecommunications networks
operate by pulses of light in the infrared wavelength range, which transmit voice, sound, images,
video, e-mail messages, and other information from one point in the network to another. Pl’s
MFNID ¶2; Def’s MFNID ¶2. Digital data is encoded into the light pulses by varying the amplitude
and the length of laser light that is sent through the network. Pl’s MFNID ¶3; Def’s MFNID ¶3.
Fiber optic telecommunications networks are generally designed to use light at infrared wavelengths.
Pl’s MFNID ¶5; Def’s MFNID ¶5. Optical fiber shows much lower transmission losses at these
wavelengths than comparable electrical or copper networks, meaning that there is little degradation
or attenuation of the light signals even over long distances. Id. There is no other use for the
merchandise other than in optical communication networks. Pl’s MFNID ¶6; Def’s MFNID ¶6. The
wavelength of the light typically used to transmit data in a fiber optic telecommunications network
Court No. 13-00400 Page 4
is approximately 1260 nanometers to 1650 nanometers; whereas human eyes can see light only in
the wavelength range from about 400 nanometers to 700 nanometers. Pl’s MFNID ¶¶ 7-8; Def’s
MFNID ¶¶ 7-8. Assuming the telecommunications network equipment at issue is used as one would
expect in conventional fiber optic telecommunication networks, humans would not be able to see
the light that is used in that equipment or those networks. Pl’s MFNID ¶8; Def’s MFNID ¶8.
The merchandise at issue is included in the plaintiff’s “Value Added Module” or
“VAM” product line, and the format of each product is intended to ease installation of the articles
into the plaintiff’s telecommunications network operator customers’ fiber optic networks. See Pl’s
MFNID ¶10; Def’s MFNID ¶10. Two different features of the VAM products enable this ease of
use: first, the optical fibers used in these products include connectors on the ends of the fibers,
eliminating the need for telecommunications network providers to splice the fibers into their
networks; second, the optical fibers in the VAM products are protected either in a housing or with
a jacketing over the actual fiber itself. Pl’s MFNID ¶11; Def’s MFNID ¶11. This protects the fibers
from damage either during the installation process or from the environment during use. Id.
The products at bar fall within three different categories of telecommunications
network equipment -- splitter modules, monitor modules, and wavelength division multiplexer
(“WDM”) modules. Pl’s MFNID ¶12; Def’s MFNID ¶12. Splitter modules take individual signals
from a single optical fiber and divide them, enabling that single signal to reach multiple
telecommunication network subscribers.1 Pl’s MFNID ¶13; Def’s MFNID ¶13. The plaintiff’s
1
A fiber optic cable that enters the housing directs the signal onto a planar lightwave circuit.
As an optical data signal enters that circuit, it follows the divided paths established by the splits on
the thin film waveguide until it is ultimately divided into the intended number of identical signals
(continued...)
Court No. 13-00400 Page 5
monitor modules allow access to signaling and control functions of a communications network in
order to evaluate performance and detect problems.2 Pl’s MFNID ¶16; Def’s MFNID ¶16. Its WDM
modules permit infrared signals of two different wavelengths to travel simultaneously on a single
fiber, thereby increasing the capacity.3 Pl’s MFNID ¶21; Def’s MFNID ¶21.
1
(...continued)
and exits the splitter module through 32 fibers with connectors on the output side. These connectors
enable the network operator to plug the splitter into a fiber distribution hub, which permits the
original signal to be directed to specific locations within the network. Pl’s MFNID, ¶¶ 13-15; Def’s
MFNID, ¶¶ 13-15.
,
2
More precisely, the monitor modules at issue use fused biconic tapers to split the infrared
light in the network into two or three different output signals: one (containing the majority of the
original signal’s power) for continuing transmission of data to the next point in the network, and the
other(s) for monitoring the presence and strength of the signal in the network through an attached
meter. A fused biconic taper is made from two optical fibers that are heated, fused together and
pulled as they are fused, creating a coupling zone that permits light of specified wavelengths to travel
between the fibers. (The parties disagree over the precise function of the fusing and pulling process,
specifically whether it involves a “splitting” of light in a certain desired wavelength range or a
“tapping off” of a fraction of the light power in a certain desired wavelength range, but that
disagreement is immaterial to the decision here.) The fused biconic tapers used in the manufacture
of the monitor modules at issue in this case were specifically designed to work on infrared light in
the 1260 nanometer to 1650 nanometer wavelength range -- light that is outside the range of human
vision. Pl’s MFNID ¶¶ 17-20; Def’s MFNID ¶¶ 17-20.
3
WDM modules are used to increase the capacity of an optical communication link by
simultaneously impressing two or more different wavelengths of light, each carrying a modulated
information signal, onto a single optical fiber. A WDM module will typically have, on one side, two
or more pairs of optical fiber connectors, with each pair accommodating an input fiber and an output
fiber carrying a unique optical signal at a single wavelength. On the other side, the module will have
only one pair of optical fiber connectors, accommodating an input fiber and an output fiber, each
carrying all of the corresponding wavelength signals at the first side. The WDM modules in this case
combine (i.e., multiplex) two incoming signals at different wavelengths, and pass the combined
signals on to a single output connector for output on a single fiber. The WDM modules also function
in the opposite direction, by taking two signals at different wavelengths arriving on a single input
fiber and separating them onto two separate output fibers. By allowing infrared signals of different
wavelengths to travel on a single fiber, the WDM modules double the amount of data and bandwidth
available for transmission in the network. The WDM modules at issue in this case perform their
(continued...)
Court No. 13-00400 Page 6
None of the products at issue contain any electronic components or electrical circuit
boards. Pl’s MFNID ¶28; Def’s MFNID ¶28. Each of the products at issue is used primarily or
exclusively for purposes of data transmission in a telecommunications network, and is operated
exclusively using light in the infrared wavelength range. Pl’s MFNID ¶29; Def’s MFNID ¶29.
Customs issued New York Ruling Letter (“NYRL”) L80881 to the plaintiff in 2004,
advising the plaintiff that the VAMs were to be classified in HTSUS subheading 9013.80.90. Pl’s
MFNID ¶30; Def’s MFNID ¶30. There are no material differences between the subject merchandise
and the VAMs that were the subject of NYRL L80881. Pl’s MFNID ¶32; Def’s MFNID ¶32. From
2009 to 2011, Customs approved 44 of the plaintiff’s protests involving substantially identical
VAMs to the VAMs at issue in this case. Pl’s MFNID ¶12; Def’s MFNID ¶12. Customs denied the
protest at bar in year 2013. Pl’s MFNID ¶¶ 37-39; Def’s MFNID ¶¶ 37-39.
III. Analysis
A.
Proper classification under the HTSUS is directed by the General Rules of
3
(...continued)
intended function either through the use of fused biconic tapers, described above, or thin film filters.
The fused biconic tapers in the WDM modules are wavelength-sensitive and can be designed to
either combine or separate wavelengths according to the length of the coupling region. A thin-film
filtering device is composed of a “stack” of thin layers of glass, providing high spatial dispersion.
The refractive index of each layer, observed at the boundaries between crystalline film layers, is
different for the different wavelength(s) within an incident light beam. The different wavelengths
of the incoming optical signal are thus bent (i.e., refracted) at different angles. The considerable
spatial separation realized, in multiple refractions, for the different wavelengths of the incoming
signal permits the tapping off of each wavelength onto a separate output fiber. The thin film filter
used in the WDM module at issue will only work on light at wavelengths of 1310 nanometers, 1490
nanometers, and 1550 nanometers, and each of these wavelengths is outside the range of human
vision. Pl’s MFNID, ¶¶ 22-27; Def’s MFNID, ¶¶ 22-27.
Court No. 13-00400 Page 7
Interpretation (“GRIs”) and, if relevant, the Additional U.S. Rules of Interpretation (“ARIs”). See,
e.g., Orlando Food Corp., supra, 140 F.3d at 1439-40. The GRIs are statutory,4 not optional, and
they are applied in numerical order. See Honda of America Manufacturing, Inc. v. United States,
607 F.3d 771, 773 (Fed. Cir. 2010); See also Orlando Food Corp., 140 F.3d at 1440; Bauerhin
Technologies Ltd. Partnership v. United States, 110 F.3d 774, 777 (Fed. Cir. 1997) (“we begin our
inquiry by examining the descriptions of the relevant headings, subheadings, and accompanying
notes”).
GRI 1 provides, inter alia, that the “titles of sections, chapters and subchapters are
provided for ease of reference only” and that “for legal purposes, classification shall be determined
according to the terms of the headings and any relative section or chapter notes and, provided such
headings or notes do not otherwise require, according to” GRIs 1 through 6. GRI 3, which codified
a judicial rule of specificity, provides that when goods are, prima facie, classifiable under two or
more headings, classification shall be effected in the following order: (a) by the heading that
provides the most specific description over the more general description, (b) by the “material” or
component which gives the goods their essential character, or (c) if headings merit equal
consideration then by that which is last in numerical order. GRI 6 provides that classification at the
subheading level shall be determined according to the terms of comparable subheadings and any
related notes and, mutatis mutandis, to the preceding GRIs. See, e.g., Orlando Food Corp., 140 F.3d
at 1440.
4
See Libas, Ltd. v. United States, 193 F.3d 1361, 1364 (Fed. Cir. 1999) (noting that the
chapter and section notes of the HTSUS are statutory law, not optional interpretive rules).
Court No. 13-00400 Page 8
In that process, the terms of HTSUS are to be construed according to their common
commercial meanings. Millenium Lumber Distribution Ltd. v. United States, 558 F.3d 1326, 1329
(Fed. Cir. 2009). Additional albeit non-binding guidance is available in the Explanatory Notes
(“ENs”) of the Harmonized Commodity Description and Coding System (“HCDCS”), maintained
by the World Customs Organization Council, as these are considered “‘generally indicative of the
proper interpretation’” of the HTSUS. Lynteq, Inc. v. United States, 976 F.2d 693, 699 (Fed. Cir.
1992), quoting H.R. Conf. Rep. No. 576, 100th Cong., 2d Sess. 549 (1988), reprinted in 1988
U.S.C.C.A.N. 1547, 1582; see also T.D. 89-80, 54 Fed. Reg. 35127, 35128 (Aug. 23, 1989).
The first step, then, is to determine which headings and accompanying notes describe
the imported VAMs. Customs classified the merchandise in chapter 90, HTSUS, which covers
“optical, photographic, cinematographic, measuring, checking, precision, medical or surgical
instruments and apparatus; parts and accessories thereof.” Of some interest here, “thereof,” it is
notable that heading 9001 includes “Optical fibers and optical fiber bundles” and “optical fiber
cables other than those of heading 8544”.5 Heading 9013, in which Customs classified the VAMs,
includes “other optical appliances and instruments, not specified or included elsewhere in this
chapter; parts and accessories thereof”.
Also noteworthy is Additional U.S. Note 3 to chapter 90, which provides:
For the purposes of this chapter, the terms “optical appliances” and “optical
instruments” refer only to those appliances and instruments which incorporate one
5
Heading 8544, HTSUS addresses (italics added) “Insulated (including enameled or
anodized) wire, cable (including coaxial cable) and other insulated electric conductors, whether or
not fitted with connectors; optical fiber cables, made up of individually sheathed fibers, whether or
not assembled with electric conductors or fitted with connectors.” The fibers used with these devices
can be either bundled or individually sheathed. See Pl’s MFNID, ¶ 11; Def’s MFNID, ¶¶ 11.
Court No. 13-00400 Page 9
or more optical elements, but do not include any appliances or instruments in which
the incorporated optical element or elements are solely for viewing a scale or for
some other subsidiary purpose.
Thus, “optical appliances” and “optical instruments” of heading 9013 must: (1) “incorporate one or
more ‘optical elements,’” and (2) the incorporated optical elements must not be “solely for viewing
a scale or for some other subsidiary purpose.” Further, for classification in heading 9013, they must
also not be specified or included elsewhere in chapter 90. The defendant thus argues the VAMs are
not so specified or included elsewhere in chapter 90, and that they were, and are, therefore properly
classifiable under subheading 9013.80.90, HTSUS, as “Other optical appliances and instruments:
Other”. Def’s Br. at 5.
On its burden of overcoming the presumption of correctness of Customs’
classification, the plaintiff argues that VAMs are not classifiable as optical appliances or optical
instruments because precedent dictates that an optical appliance or instrument must aid or enhance
human vision, which these devices cannot do because they operate beyond the visible spectrum. Pl’s
Br. at 14-18. The plaintiff’s preferred classification is in chapter 85, HTSUS, which covers
“electrical machinery and equipment and parts thereof; sound recorders and reproducers, television
image and sound recorders and reproducers, and parts and accessories of such articles.” Id. at 18-20;
see Chapter 85, HTSUS. The precise heading to which the plaintiff directs attention, 8517, HTSUS,
includes “other apparatus for the transmission or reception of voice, images or other data, including
apparatus for communication in a wired or wireless network (such as a local or wide area network),
other than transmission or reception apparatus of heading 8443, 8525, 8527 or 8528; parts thereof”.
The plaintiff contends that the VAMs are properly classifiable as “Other apparatus for transmission
or reception of voice, images or other data, including apparatus for communication in a wired or
Court No. 13-00400 Page 10
wireless network (such as a local or wide area network): Machines for the reception, conversion and
transmission or regeneration of voice, images or other data, including switching and routing
apparatus: Other” under subheading 8517.62.00, HTSUS. Pl’s Br. at 20-21.
B.
Comparing the language of the headings, on the one hand “other apparatus for the
transmission or reception of voice, images or other data, including apparatus for communication in
a wired or wireless network (such as a local or wide area network)” of heading 8517 would appear
apt insofar as it describes the sole purpose of the VAMs. However, because it constitutes an
imprecise description, heading 8517 is inapplicable, as discussed further below.
Where the meaning of the statute is plain and unambiguous, that meaning prevails.
See, e.g., Muwwakkil v. Office of Personnel Management, 18 F.3d 921 (Fed. Cir. 1994). The parties
acknowledge that the VAMS at bar are fiber optic telecommunications network equipment, Pl’s Br.
at 3, Def’s Br. at 7, and while their papers assume a lack of definitive meaning of the term “optical”
in the HTSUS, all of their inclinations at definitions are circular in using “optic” or some variation
thereof (the plaintiff’s argument also lends itself to an ambiguity claim, which would require further
inquiry for resolution). The lack of an express definition in the HTSUS, however, does not make
“optical” ambiguous: when drafting chapter 90, HTSUS, in addition to traditional “optical” devices
operating within the visible spectrum, the authors made the express addition of heading 9001,
HTSUS, thereby making plain their awareness of the “optical” properties of fiber optics in “light”
transmission -- including that which is beyond the visible spectrum. The words themselves lead only
to that conclusion. Indeed, it would be incredible if the drafters had not intended this provision of
chapter 90 applicable to future fiber optic development, since tariff statutes are enacted “not only for
Court No. 13-00400 Page 11
the present but also for the future, thereby embracing articles produced by technologies which may
not have been employed or known to commerce at the time of the enactment”. Corporacion
Sublistatica v. United States, 1 CIT 120, 126, 511 F. Supp. 805, 809 (1981). See Additional U.S.
Note 3, HTSUS.
The appropriate classification of the VAMs at bar is thus resolved by the plain
meaning of “optical” in the statute, as properly understood and apparent in heading 9013. The
defendant’s papers reference several lexicographic definitions that reinforce such understanding:
An “optical element,” the statutory term included in Additional U.S. Note 3 to
Chapter 90, is defined as “a part of an optical instrument which acts upon the light
passing through the instrument, such as a lens, prism or mirror.” McGraw Hill
Dictionary of Scientific and Technical Terms at 1044 (Exhibit 4). The Oxford
English Dictionary defines “optical” to include “[o]f or relating to light, as the
medium of sight, or in relation to its physical properties; of or relating to optics. Also
in extended use: of or relating to radiation in the immediately adjacent parts of the
electromagnetic spectrum, i.e. the infrared and ultraviolet.” Oxford English
Dictionary, definition of “optical” at 2 (Exhibit 5). The Merriam-Webster Dictionary
provides several definitions for “optical,” including “of, relating to, or utilizing light
especially instead of other forms of energy,” and “of or relating to the science of
optics.” Merriam-Webster Dictionary, definition of “optical” at 1 (Exhibit 6).
“Optics” is defined as “a science that deals with the genesis and propagation of light,
the changes that it undergoes and produces, and other phenomena closely associated
with it.” Id. at 4.
Def’s Br. at 8-9.
In accordance with the foregoing, heading 9013’s “other optical appliances and
instruments, not specified or included elsewhere in this chapter” is (also) an apt description of the
VAMs. This is so, because such appliances and instruments, used in conjunction with the “optical
fibers” of heading 9001, HTSUS, are plainly covered by chapter 90, HTSUS. See Additional U.S.
Note 3 to Chapter 90; see also infra. “Optical” within the remainder of the chapter should not be
interpreted in a way that would conflict with heading 9001, and vice versa, unless it is clear that the
Court No. 13-00400 Page 12
words used in the HTSUS or its notes are intended to that effect. See, e.g., E.I. Dupont de Nemours
& Co. v. United States, 24 CIT 1301, 1303 (2000), referencing Princess Cruises, Inc. v. United
States, 201 F.3d 1352, 1362 (Fed. Cir. 2000). An “optical” appliance or instrument with no purpose
but to channel and direct information through fiber optic cables, and which is not the fibers
themselves, would fall within heading 9013, HTSUS, i.e., “other optical appliances and instruments,
not specified or included elsewhere in this chapter”. And the appropriate subheading of heading
9013 for the VAMs can only be “Other devices, appliances and instruments: Other”, i.e., subheading
9013.80.90, HTSUS, in accordance with Customs’ original classification thereof.
The plaintiff’s arguments do not obviate that 9013.80.90, HTSUS covers the optical,
light-signal manipulation, functionality of the VAMs at bar. The plaintiff would juxtapose heading
9013 against heading 8517, HTSUS, but, as the defendant correctly points out, that is a dubious
proposition6 because the plaintiff’s optical devices are excluded from chapter 85 by Note 1(m) to
Section XVI (which covers chapter 85, HTSUS), which provides: “this section does not cover . . .
[a]rticles of Chapter 90.” See Def’s Br. at 16-17. Simply put: as to which of chapter 90 and chapter
85 provides the “more specific” heading on an article’s classification, there is no “comparison”
involved, because Note 1(m) renders GRI 3 inapplicable. Cf. Sharp Microelectronics Tech., Inc. v.
6
If heading 8517 were indeed applicable, the foregoing would lend itself to application of
GRI 3(a), pursuant to which the question is which of the two proposed headings would be the more
specific; and such consideration would only lead to the conclusion that heading 9013 is the more
precise, because “other apparatus for the transmission or reception of voice, images or other data”
of heading 8517 encompasses a much broader range of goods than heading 9013’s more specific
description of the VAMs’ “optical” functionality. In other words, per GRI 3(a), heading 9013,
HTSUS, would be the more specific and appropriate heading for the VAMs at bar, as the plaintiff’s
arguments do not persuade otherwise. Furthermore, were it even necessary to apply GRI 3(b) or (c),
the result would appear to be the same.
Court No. 13-00400 Page 13
United States, 20 CIT 793, 802, 932 F. Supp. 1499, 1506 (1996) (“Note 1(m) to Section XVI is
controlling under GRI 1”), aff’d 122 F.3d 1446 (Fed. Cir. 1997); E.T. Horn Co. v. United States,
945 F.2d 1540, 1544 (Fed. Cir. 1991) (relative specificity inapplicable where competing tariff
provisions are mutually exclusive). The Sharp appellate court further observed that “[i]f one
determines that . . . [the] device belongs in heading 9013 because it is not more specifically captured
elsewhere in the schedule, then Note 1(m) complements the rule of relative specificity by excluding
the device from classification in” chapters 84 or 85. 122 F.3d at 1450. The plaintiff provided no
compelling counter-argument but only reminded the court that Customs agents earlier reached a
different conclusion on the plaintiff’s VAMs. Pl’s Resp. at 16. This court, however, is neither
bound nor persuaded by these agents’ determinations. The plaintiff’s optical devices are prima facie
classifiable in chapter 90 and are therefore excluded from chapter 85 pursuant to Note 1(m).
C.
A brief history of fiber optics and other relevant judicial decisions will clarify this
court’s decision. First, the court acknowledges that fiber optics are now a near-universal staple of
modern technology using pulses of light and refraction in glass to efficiently transmit information
quickly across long distances. In every moment, these systems are linking computer networks,
transporting data for high speed internet, making long distance telephone conversations possible, and
directing crystal clear images to television screens. Fiber optic technology is used to connect the
world in ways inconceivable a mere century ago.
The science of fiber optics began developing in earnest in the mid-nineteenth century
when European inventors experimented with light refraction over distances. Mary Bellis, How Fiber
Optics Were Invented: The History of Fiber Optics from Bell’s Photophone to Corning Researchers,
Court No. 13-00400 Page 14
available at: https://www.thoughtco.com/birth-of-fiber-optics-4091837 (last visited this date). Over
the next century this experimentation led to the theorization that this technology could be used to
transfer data over much longer distances. Id. The only problem was discovering how to minimize
loss to allow for efficient transmission. Id. In 1970 Corning Glass Works turned theory into reality,
and thus paved the way for the commercialization of fiber optics for telecommunications; by the end
of the 1970s, cities had begun installing optical telephone networks, and to this point the adoption
of fiber optics in these United States has been relatively swift, as it is now “the” standard for fixed-
line data transmission, having largely replaced copper line transmission thereof. See id.
The customs bar is not only presumed well-aware, but has been a principal driver, of
the periodic updates to the tariff schedules to better reflect emerging technologies making their way
into the channels of international commerce. As of 1984, the Tariff Schedules of the United States
(“TSUS”; the predecessor to the HTSUS), Schedule 7, Part 2, Subpart A addressed “optical
elements”. Therein, TSUS items 708.01 to 708.93 described lenses, prisms, mirrors, telescopes and
more. There was no mention of fiber optics. And by 1985, at least eight cases7 from this court and
its predecessor as well as that of the Court of Appeals for the Federal Circuit had decided that the
7
See Decca Radar, Inc. v. United States, 57 Cust. Ct. 165, 171 (1966) (microscopes); Bendix
Corp. v. United States, 57 Cust. Ct. 184, 197 (1966) (polarimeter); Paillard, Inc. v. United States,
57 Cust. Ct. 439, 448 (1966) (anamorphic lenses and adapters); Engis Equip. Co. v. United States,
62 Cust. Ct. 29, 33, 294 F. Supp. 964, 967 (1969) (autocollimators); Sumitomo Shoji New York, Inc.
v. United States, 64 Cust. Ct. 299, 302 (1970) (parabolic mirrors for ceilometer systems); Parson
Optical Laboratories v. United States, 68 Cust. Ct. 143, 147 (1972) (applanation tonometers); United
States v. Ataka Am., Inc., 550 F.2d 33, 36 (CCPA 1977) (“Ataka”) (gastrointestinal fiberscopes);
EAC Engineering v. United States, 9 CIT 534, 540, 623 F. Supp. 1255, 1260 (1985) (spark
detectors).
Court No. 13-00400 Page 15
TSUS term “optical instrument” required that a device must aid human vision. None of these cases
considered fiber optic network technologies.
In the 1985 update that encompassed Schedule 7, Part 2, Subpart A, the TSUS
drafters added item 707.90, thus listing as the first item of that Subpart “optical fibers, whether or
not in bundles, cables or otherwise put up, with or without connectors and whether mounted or not
mounted”. Item 707.90, TSUS. The statistical suffix included “put up in cables, ribbons, or similar
form, for the transmission of voice, data, or video communications.” Item 707.90.10, TSUS.
Notably, these items were added during the aforementioned era of rapid growth in the then-emerging
industry of fiber optics for data transmission, and they were adopted into the harmonized system in
1988, where they have remained at the start of the chapter on optical goods.
In 1997 the Court of Appeals for the Federal Circuit considered an appeal from the
classification of a marine sextant device. Celestaire v. United States, 120 F.3d 1232 (Fed. Cir.
1997).8 Relying on the criteria in Ataka,9 Celestaire set forth three conditions for a particular item
to be classified as an “optical instrument” under the HTSUS:
1. Whether the device acts on or interacts with light;
2. Whether the device permits or enhances human vision through the use of one or
more optical elements; and
3. Whether the device uses the optical properties of the device in something more
than a “subsidiary” capacity.
8
This is the only case to directly address the application of “optical” after the 1985 TSUS
additions.
9
Ataka predated the 1985 changes to the TSUS.
Court No. 13-00400 Page 16
Id. at 1233, citing Ataka, 550 F.2d at 37 (and noting that the basis of this decision was the binding
nature of decisions from the Court of Customs and Patent Appeals). The Ataka court also followed
these requirements with the acknowledgment that “none of the foregoing criteria is determinative
in every case, but they are useful in determining the statutory meaning of ‘optical instrument(s).’”
550 F.2d at 37. Critically, this case was also not about fiber optics and instead focused only on the
traditional, pre-1980s tariff use of “optical”. As a decision of the Court of Appeals for the Federal
Circuit, the prescribed meaning of “optical” is binding on this court; however, it is not binding where
the products are of a different nature or intended meaning within the statute, as envisioned in that
court’s clarification that the foregoing criteria is not determinative in every case.
“[I]t is a standard rule of statutory interpretation that ‘where the same word or phrase
is used in different parts of the same statute, it will be presumed, in the absence of any clear
indication of a contrary intent to be used in the same sense throughout the statute.’” Railtech Boutet,
Inc. v. United States, 27 CIT 1023, 1031 (2003), quoting Productol Chemical Co. v. United States,
74 Cust. Ct. 138, 151 (1975). To delimit the meaning of “optical” in heading 9013, HTSUS, to that
part of the light spectrum that is visible to the naked human eye would render heading 9001, HTSUS,
largely meaningless, and that limitation would necessarily apply to all of chapter 90 and the HTSUS
as a whole. Accordingly, Celestaire cannot be read to mean what the plaintiff implores.
Beyond the HTSUS and precedent, the nonbinding Explanatory Notes anticipate
optical to include light beyond the visible spectrum. See Def. Br. at 19-22. After the Celestaire
decision was issued, it is noteworthy that the ENs to heading 9001 were revised (coincidentally or
otherwise) to describe explicitly the term “optical element,” the statutory term used in Additional
Court No. 13-00400 Page 17
U.S. Note 3 to chapter 90, by expressly referencing light that is not visible to humans. The ENs to
heading 90.01(D) thus currently describe “optical elements” as follows:
(D) Optical elements of any material other than glass, whether or not optically
worked, not permanently mounted (e.g., elements of quartz (other than fused quartz),
fluorspar, plastics or metal; optical elements in the form of cultured crystals of
magnesium oxide or of the halides of the alkali or the alkaline-earth metals).
Optical elements are manufactured in such a way that they produce a required optical
effect. An optical element does more than merely allow light (visible, ultraviolet or
infrared) to pass through it, rather the passage of light must be altered in some way,
for example by being reflected, attenuated, filtered, diffracted, collimated, etc.
EN 90.01(D), HTSUS (Exhibit 8 at XVIII-9001-2) (italics added; bolding omitted). The ENs’
definition of “optical element” precisely describes the optical elements of the plaintiff’s VAMs and
is consistent with the common and commercial meaning. The ENs unambiguously state that the
wavelengths of “light” with which the optical elements may interact include ultraviolet and infrared
light in addition to visible light. Id. For the above reasons, the court finds no merit in the plaintiff’s
arguments against classification in heading 9013, HTSUS.
In passing, the court also notes the parties’ argument over whether heading 8517,
HTSUS, includes non-electronic machines. The court need not decide the broader contentions;
suffice it to state here that heading 8517, HTSUS, addresses the antecedent fixed-line data-
transmission technology of fiber optics (i.e., via copper line) and otherwise gives no indication that
optical fiber technology should be included therein in contravention of chapter 90, HTSUS, and as
discussed above, other language in that chapter specifically proscribes classification of “optical”
appliances or instruments such as the VAMs at bar from classification under chapter 85, HTSUS.
Court No. 13-00400 Page 18
IV. Conclusion
In accordance with the foregoing, the court denies plaintiff’s motion for summary
judgment and grants defendant’s cross-motion therefor, as Customs properly classified plaintiff’s
VAMs under subheading 9013.80.90, HTSUS. Judgment to that effect will be entered separately.
/s/ R. Kenton Musgrave
R. Kenton Musgrave, Senior Judge
Dated: October , 2017
New York, New York