Case: 20-1009 Document: 56 Page: 1 Filed: 01/07/2021
NOTE: This disposition is nonprecedential.
United States Court of Appeals
for the Federal Circuit
______________________
OLAF SOOT DESIGN, LLC,
Plaintiff-Cross-Appellant
v.
DAKTRONICS, INC.,
Defendant-Appellant
______________________
2020-1009, 2020-1034
______________________
Appeals from the United States District Court for the
Southern District of New York in No. 1:15-cv-05024-GBD-
OTW, Judge George B. Daniels.
______________________
Decided: January 7, 2021
______________________
JAMES M. BOLLINGER, Troutman Pepper Hamilton
Sanders LLP, New York, NY, argued for plaintiff-cross-ap-
pellant. Also represented by MAGNUS ESSUNGER,
KATHERINE HARIHAR, GERALD EAMES PORTER, PHOENIX
PAK.
KENNETH BRESSLER, Blank Rome LLP, New York, NY,
argued for defendant-appellant. Also represented by
DOMINGO M. LLAGOSTERA, RUSSELL T. WONG, Houston, TX.
______________________
Case: 20-1009 Document: 56 Page: 2 Filed: 01/07/2021
2 OLAF SOOT DESIGN, LLC v. DAKTRONICS, INC.
Before PROST, Chief Judge, LOURIE and REYNA, Circuit
Judges.
Opinion for the court filed by Chief Judge PROST, in which
LOURIE and REYNA, Circuit Judges, join.
Additional views filed by Circuit Judge LOURIE.
PROST, Chief Judge.
Olaf Sööt Design, LLC (“OSD”) sued Daktronics, Inc.
(“Daktronics”), alleging that Daktronics’s Vortek product
infringes claim 27 of U.S. Patent No. 6,520,485 (“the ’485
patent”). Four of the eight elements of claim 27—elements
b, d, e, and h—were tried to a jury, which ultimately found
that the Vortek product met each of these elements under
the doctrine of equivalents. After the jury verdict,
Daktronics moved for judgment as a matter of law
(“JMOL”) of noninfringement. Daktronics argued that the
Vortek product did not meet element h either literally or
under the doctrine of equivalents. The district court denied
this motion. See Olaf Sööt Design, LLC v. Daktronics, Inc.,
406 F. Supp. 3d 328, 338 (S.D.N.Y. 2019) (“Decision Deny-
ing JMOL”). Daktronics appealed the final judgment of in-
fringement and several additional rulings. OSD cross-
appealed the district court’s judgment of no willful in-
fringement and denial of OSD’s motion for an exceptional-
case determination and attorneys’ fees. We have jurisdic-
tion under 28 U.S.C. § 1295(a)(1).
We reverse the final judgment of infringement, moot-
ing the remainder of Daktronics’s appeal and OSD’s cross-
appeal.
BACKGROUND
I
The ’485 patent discloses a theater winch for moving
scenery and lighting by winding and unwinding cables,
which are attached to the scenery, around a drum.
Case: 20-1009 Document: 56 Page: 3 Filed: 01/07/2021
OLAF SOOT DESIGN, LLC v. DAKTRONICS, INC. 3
’485 patent col. 3 ll. 41–51. An embodiment of the winch
described by the ’485 patent is shown below. The winch is
a “zero fleet angle winch,” which means that the cables
wind and unwind together without tangling and are main-
tained perpendicular to the drum. Id. at col. 4 ll. 14–29.
The winch achieves zero fleet angle via movement of cable
drum 11 laterally along carriage 40 as cable drum 11 ro-
tates, permitting cables 50 to wind and unwind uniformly
and preventing the cables from winding on themselves. Id.
at col. 4, ll. 14–29.
More specifically, “nut 53 is non-rotatably mounted to
the drum assembly 10 brake end cap 14 elongated hub.”
Id. at col. 4 ll. 38–40. A motor rotates drum 11 and the
mounted nut around fixed screw 51, which causes the nut
to engage with and rotate around fixed screw 51. Id. at col.
4, ll. 30–60. Such engagement causes the nut and drum 11
to move laterally along carriage 40. Id. at col. 4, ll. 30–60.
As drum 11, the elongated hub, and the nut move laterally,
“the screw 51 can pass, via the hollow hub, inside the drum
11, which is also hollow.” ’485 patent col. 4 ll. 40–41. Ad-
vantages of this setup include that “the screw 51 is pro-
tected” inside drum 11 and that the “overall length (its long
Case: 20-1009 Document: 56 Page: 4 Filed: 01/07/2021
4 OLAF SOOT DESIGN, LLC v. DAKTRONICS, INC.
dimension) of the winch 1” is reduced. Id. at col. 4, ll. 41–
42, 47–49.
Claim 27—the only claim at issue on appeal—recites:
27. A motorized fly system winch, drum and car-
riage combination for raising and lowering an ob-
ject, comprising:
a) a carriage,
b) a base member having first and second end por-
tions,
c) an elongated hollow drum having cable grooves
and having a longitudinal axis and rotatably
mounted on the base member and a cable for sim-
ultaneously winding and unwinding the cable on or
off the drum grooves when the drum is rotated, said
cable passing from the outside of the drum directly
or via a sheave to the object such that rotation of
the drum causes the object to move up and down,
d) first means for slideably mounting the base
member to the carriage,
e) said drum having at a first end a hollow hub ro-
tatably journalled at the first end portion of the
base member,
f) second means for rotating the drum relative to
the base member such that the base member with
its drum and the carriage can move with respect to
each other in synchronism with the rotation of the
drum to control the cable run to the object,
g) said second means comprising an elongated
screw having a first end non-rotatably mounted to
the carriage and a second end connected to the
drum and axially aligned with the hollow hub and
the hollow drum, said screw extending mainly out-
side of the hollow drum when the cable is wound up
Case: 20-1009 Document: 56 Page: 5 Filed: 01/07/2021
OLAF SOOT DESIGN, LLC v. DAKTRONICS, INC. 5
on or unwound from the drum and the object is in
its respective up or down position,
h) said hollow hub and hollow drum being sized
such that the screw can move into the hollow hub to
allow the hollow drum to receive the screw as the
cable unwinds from or winds up on the drum as the
object moves to its respective down or up position.
(emphasis added).
II
The relevant portion of Daktronics’s Vortek product is
depicted below. As shown, see Cross-Appellant’s Br. 16, the
internal passage for the screw ends within the hub, approx-
imately two inches from the inside of the wider grooved
drum member that receives and engages with the cables.
DISCUSSION
We conclude that the Vortek product does not infringe
claim 27 of the ’485 patent as a matter of law and thus re-
verse the final judgment of infringement. This holding
moots the remainder of Daktronics’s appeal and OSD’s
cross-appeal.
Case: 20-1009 Document: 56 Page: 6 Filed: 01/07/2021
6 OLAF SOOT DESIGN, LLC v. DAKTRONICS, INC.
I
In O2 Micro International Ltd. v. Beyond Innovation
Technology Co., we explained that “[w]hen the parties pre-
sent a fundamental dispute regarding the scope of a claim
term, it is the court’s duty to resolve it.” 521 F.3d 1351,
1362 (Fed. Cir. 2008). Otherwise, a legal question will be
“improperly submitted to the jury.” Id.
Here, the district court failed to resolve a fundamental
dispute regarding the scope of claim element h—specifi-
cally, whether the hub is part of the drum.
OSD argued in its claim construction briefing that “the
hub is a part of the drum.” J.A. 415. Because it is undis-
puted that the Vortek hub is able to receive the screw, un-
der OSD’s interpretation of element h that the hub is part
of the drum, it would necessarily follow that the Vortek
drum would be able to receive the screw, as element h re-
quires.
Daktronics, on the other hand, contended that the hub
and drum are separate and that OSD was attempting to
“drop[] the [claim] requirement that the drum receives the
screw.” J.A. 836. Because it is undisputed that the Vortek
screw is received by the hub and not the wider grooved
drum member that receives the cables, under Daktronics’s
interpretation of element h that the hub is not part of the
drum, the Vortek drum would not receive the screw, as el-
ement h requires.
In its Markman order, the court stated that “[n]o con-
struction of [element h] is necessary” and failed to resolve
the parties’ dispute as to the meaning of the claim. Olaf
Sööt Design, LLC v. Daktronics, Inc., 220 F. Supp. 3d 458,
467–68 (S.D.N.Y. 2016). The court did not otherwise re-
solve this claim construction dispute prior to the jury trial.
This failure violates O2 Micro.
The district court belatedly resolved the claim con-
struction dispute in its post-jury-verdict decision denying
Case: 20-1009 Document: 56 Page: 7 Filed: 01/07/2021
OLAF SOOT DESIGN, LLC v. DAKTRONICS, INC. 7
JMOL of noninfringement. Specifically, the district court
concluded that the hub is part of the drum and, on that
basis, rejected Daktronics’s argument that the Vortek
product does not infringe as a matter of law because the
Vortek drum does not receive the screw. Decision Denying
JMOL, 406 F. Supp. 3d. at 340–41. The district court ex-
plained that “the jury relied on ample evidence that the
hollow drum and the hollow hub are not separate entities
for purposes of receiving the screw.” Id. at 342. That claim
construction dispute was for the judge to decide, not the
jury. The district court’s failure to resolve this material
claim construction dispute prior to trial resulted in a claim
construction dispute being “improperly submitted to the
jury.” O2 Micro, 521 F.3d at 1362.
II
In O2 Micro, “[b]ecause we determine[d] that the dis-
trict court [was] in the best position to determine the
proper construction of the claim in the first instance,” we
did not resolve the claim construction dispute in the first
instance and instead remanded for further proceedings. Id.
at 1362–63, 1366. Here, however, because we have the
benefit of the district court’s belated claim construction,
and because the parties have briefed the dispute, no re-
mand is necessary. We agree with Daktronics that, with
respect to claim 27, the claimed hollow hub is not a compo-
nent of the claimed hollow drum.
“The proper construction of a patent’s claims is an issue
of Federal Circuit law.” Powell v. Home Depot U.S.A., Inc.,
663 F.3d 1221, 1228 (Fed. Cir. 2011). “The construction of
claim terms based on the claim language, the specification,
and the prosecution history are legal determinations.” Trs.
of Columbia Univ. v. Symantec Corp., 811 F.3d 1359, 1362
(Fed. Cir. 2016) (citing Teva Pharms. USA, Inc. v. Sandoz,
Inc., 574 U.S. 318, 328 (2015)).
Claim terms “are generally given their ordinary and
customary meaning,” which “is the meaning that the term
Case: 20-1009 Document: 56 Page: 8 Filed: 01/07/2021
8 OLAF SOOT DESIGN, LLC v. DAKTRONICS, INC.
would have to a person of ordinary skill in the art in ques-
tion at the time of the invention.” Phillips v. AWH Corp.,
415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc). “[T]he
claims themselves provide substantial guidance as to the
meaning of particular claim terms.” Id. at 1314. “[T]he
person of ordinary skill in the art is deemed to read the
claim term not only in the context of the particular claim
in which the disputed term appears, but in the context of
the entire patent, including the specification.” Id. at 1313.
Although claim terms are interpreted in the context of the
entire patent, it is improper to “read[] limitations from the
specification into the claim.” Id. at 1323. “[T]he line be-
tween construing terms and importing limitations can be
discerned with reasonable certainty and predictability if
the court’s focus remains on understanding how a person
of ordinary skill in the art would understand the claim
terms.” Id.
Element h of claim 27 recites, in relevant part, that the
“hollow hub and hollow drum [are] sized such that the
screw can move into the hollow hub to allow the hollow
drum to receive the screw.” This language makes clear
that the hollow hub is not part of the hollow drum. The
claim language treats the hub and drum as two compo-
nents, reciting that both “the hollow hub and hollow drum”
are sized to receive the screw. Furthermore, it would make
no sense for the hollow hub to be part of the hollow drum
given that the claim says that the screw moves into the hol-
low hub “to allow the hollow drum to receive the screw.”
That language indicates that the screw’s entry into one
component, the hollow hub, facilitates entry of the screw
into another component, the hollow drum, not that entry
into the hollow hub is entry into the hollow drum. In sum,
the clearest reading of the claim language is that the hol-
low hub is not a component of the drum.
The specification confirms this conclusion. In particu-
lar, the specification explains that the “hub is hollow so
that the screw 51 can pass, via the hollow hub, inside the
Case: 20-1009 Document: 56 Page: 9 Filed: 01/07/2021
OLAF SOOT DESIGN, LLC v. DAKTRONICS, INC. 9
drum 11, which is also hollow.” ’485 patent col. 4 ll. 39–41.
This passage confirms that the screw enters the drum via
passage through another component, the hollow hub. And,
after explaining that the hub is hollow, the passage contin-
ues treating the hub and drum as separate components by
disclosing that the drum is “also” hollow.
OSD contends that the hub is part of the drum. In sup-
port, OSD argues that element e of claim 27—which recites
“said drum having at a first end a hollow hub”—confirms
that the hub is a component of the drum. We disagree. El-
ement e merely specifies that the hollow hub is positioned
at one of the ends of the drum.
OSD also points to the specification’s explanation that
“the grooved cable drum 11 can be constructed of one tub-
ular member 12, one drive end cap 13 and one brake end
cap 14, all welded together,” id. at col. 5 ll. 7–9, and that
the hub is “part of the cable drum 11 brake end cap 14,” id.
at col. 3 ll. 59–61. However, this language is permissive,
not mandatory: at most, this passage explains that the hub
can be part of the drum, not that the hub is part of the
drum. And the specification passage discussed previously
contemplates embodiments in which the hub is not consid-
ered part of the drum. See id. at col. 4 ll. 39–41. For these
reasons, and because claim 27 indicates that the hub is not
part of the drum, we are not persuaded by OSD’s reliance
on this passage of the specification. 1
Accordingly, we conclude that, for purposes of claim 27,
the hub is not part of the drum.
1 We note that “[i]t is not necessary that each claim
read on every embodiment.” Baran v. Med. Device Techs.,
Inc., 616 F.3d 1309, 1316 (Fed. Cir. 2010).
Case: 20-1009 Document: 56 Page: 10 Filed: 01/07/2021
10 OLAF SOOT DESIGN, LLC v. DAKTRONICS, INC.
III
Under the proper construction, the Vortek product does
not infringe claim 27 either literally or under the doctrine
of equivalents. The Vortek product does not literally meet
element h of claim 27 because the hollow drum of the
Vortek is not able to receive the screw.
In addition, we conclude as a matter of law that the
Vortek product does not meet element h under the doctrine
of equivalents. The Vortek drum is unable to receive the
screw, and the Vortek product has no equivalent function.
Thus, a finding of infringement under the doctrine of equiv-
alents would be inappropriate under these specific circum-
stances because such a finding would impermissibly
eliminate the requirement that the hollow drum be able to
receive the screw as the cable winds or unwinds on the
drum. See, e.g., Warner-Jenkinson Co. v. Hilton Davis
Chem. Co., 520 U.S. 17, 29 (1997) (“[T]he application of the
doctrine [of equivalents], even as to an individual element,
is not allowed such broad play as to effectively eliminate
that element in its entirety.”); Power Integrations, Inc. v.
Fairchild Semiconductor Int’l, Inc., 843 F.3d 1315, 1344–
45 (Fed. Cir. 2016) (rejecting a theory of infringement un-
der the doctrine of equivalents that would vitiate a claim
limitation by rendering it meaningless); Freedman Seating
Co. v. Am. Seating Co., 420 F.3d 1350, 1358 (Fed.
Cir. 2005) (concluding that “an element of an accused prod-
uct or process is not, as a matter of law, equivalent to a
limitation of the claimed invention if such a finding would
entirely vitiate the limitation”); Pfizer, Inc. v. Teva
Pharms., USA, Inc., 429 F.3d 1364, 1379 (Fed. Cir. 2005)
(“The all limitations rule ‘provides that the doctrine of
equivalents does not apply if applying the doctrine would
vitiate an entire claim limitation.’” (quoting Asyst Techs.,
Inc. v. Emtrak, Inc., 402 F.3d 1188, 1195 (Fed. Cir. 2005))).
Case: 20-1009 Document: 56 Page: 11 Filed: 01/07/2021
OLAF SOOT DESIGN, LLC v. DAKTRONICS, INC. 11
CONCLUSION
We have considered OSD’s remaining arguments but
find them unpersuasive. For the foregoing reasons, we con-
clude that the Vortek product does not infringe claim 27 of
the ’485 patent, and we therefore reverse the final judg-
ment of infringement. In view of this conclusion, we dis-
miss the remainder of Daktronics’s appeal and the entirety
of OSD’s cross-appeal as moot.
REVERSED-IN-PART AND DISMISSED-IN-PART
Case: 20-1009 Document: 56 Page: 12 Filed: 01/07/2021
NOTE: This disposition is nonprecedential.
United States Court of Appeals
for the Federal Circuit
______________________
OLAF SOOT DESIGN, LLC,
Plaintiff-Cross-Appellant
v.
DAKTRONICS, INC.,
Defendant-Appellant
______________________
2020-1009, 2020-1034
______________________
Appeals from the United States District Court for the
Southern District of New York in No. 1:15-cv-05024-GBD-
OTW, Judge George B. Daniels.
______________________
LOURIE, Circuit Judge, additional views.
I concur in the panel’s decision and fully agree with its
reasoning as set forth in Chief Judge Prost’s opinion. I
write these separate comments to express concern over the
use of the doctrine of equivalents to find infringement
when four claim limitations have not literally been met by
the accused device.
Infringement under our law is basically determined by
whether the accused device, or process, or compound,
meets the claims of the patent. That is literal infringe-
ment, the usual situation in patent litigation. We do have
a doctrine of equivalents, which is clearly part of our law.
Case: 20-1009 Document: 56 Page: 13 Filed: 01/07/2021
2 OLAF SOOT DESIGN, LLC v. DAKTRONICS, INC.
Graver Tank & Mfg. Co. v. Linde Air Prods. Co., 339 U.S.
605 (1950); Festo Corp. v. Shoketsu Kinzoku Kogyo Ka-
bushiki Co., 535 U.S. 722 (2002); Eli Lilly & Co. v. Hospira,
Inc., 933 F.3d 1320 (Fed. Cir. 2019). But almost always
when an equivalence issue arises, it is with respect to one,
or perhaps two, claim limitations.
Equivalence requires meeting the function-way-result
test, or the insubstantial differences test, or both. See
Warner-Jenkinson Co. v. Hilton Davis Chem. Co., 520 U.S.
17, 40 (1997) (“Different linguistic frameworks may be
more suitable to different cases, depending on their partic-
ular facts.”). But the Supreme Court has cautioned that
the application of these tests requires “a special vigilance
against allowing the concept of equivalence to eliminate
completely any such elements” that are not literally met.
Id. In short, in applying the doctrine of equivalents, judges
and juries must use common sense.
I have previously noted that in the pharmaceutical in-
dustry it is quite possible that two compounds might sat-
isfy the function-way-result test even though they are not
equivalent on a structural, or identity, basis. See Mylan
Institutional LLC v. Aurobindo Pharma Ltd., 857 F.3d 858,
869 (Fed. Cir. 2017) (noting that the substantially different
compounds aspirin and ibuprofen could be considered to
have the same function, way, and result). In such a case,
the law should not be so rigid as to restrain a factfinder
from recognizing the clear lack of equivalence.
Similarly, common sense must be applied to the insub-
stantial differences test. Having multiple differences from
the claim should be a hallmark of noninfringement. It fails
the straight face test to assert that the accused subject
matter does not meet the claims in multiple distinct ways,
but infringes anyway.
Here, we have four claim limitations that are not met
literally. I have found no case in which we have affirmed a
finding of infringement under the doctrine of equivalents
Case: 20-1009 Document: 56 Page: 14 Filed: 01/07/2021
OLAF SOOT DESIGN, LLC v. DAKTRONICS, INC. 3
when four separate claim limitations are not met literally.
That would be equivalent (no pun intended) to holding that
the accused product infringes when it does not infringe.
We have a concept in patent law of “inventing around,” and
that is considered socially desirable for the promotion of
competition and the benefit of consumers. See, e.g., West-
vaco Corp. v. Int’l Paper Co., 991 F.2d 735, 745 (Fed. Cir.
1993); State Indus., Inc. v. A.O. Smith Corp., 751 F.2d
1226, 1235–36 (Fed. Cir. 1985). To find that multiple sig-
nificant instances of inventing around still infringe runs
counter to that important theory of patent law. Such a con-
clusion, whether by a jury, as here, or by a judge, makes a
mockery of claims.
Moreover, shockingly, the patent owner in this case
cross appeals on the issue of willful infringement and relies
on supposed evidence that the accused infringer allegedly
copied the patent owner’s product. To argue willfulness in
making or selling a device that fails in four separate re-
spects to literally meet the claims would almost qualify for
a chutzpah award. See Dainippon Screen Mfg. Co. v.
CFMT, Inc., 142 F.3d 1266, 1271 (Fed. Cir. 1998); Refac
Int’l, Ltd. v. Lotus Dev. Corp., 81 F.3d 1576, 1584 (Fed. Cir.
1996); Checkpoint Sys., Inc. v. United States Int’l Trade
Comm’n, 54 F.3d 756, 763 n.7 (Fed. Cir. 1995) (noting that
“chutzpah” describes “the behavior of a person who kills his
parents and pleads for the court’s mercy on the ground of
being an orphan”). The only acts that seem willful were
avoiding the patented device.
We have here found deficiencies in the district court’s
analysis of element (h) of the asserted claim, but I write
only to call attention to the danger in the orderly thinking
about infringement determinations, by business people, by
attorneys, or by courts, in extending equivalence to multi-
ple claim limitations, which has the potential of destroying
the primacy of claims. Yes, we have a doctrine of equiva-
lents, but “it is the exception . . . not the rule, for if the
public comes to believe (or fear) that the language of patent
Case: 20-1009 Document: 56 Page: 15 Filed: 01/07/2021
4 OLAF SOOT DESIGN, LLC v. DAKTRONICS, INC.
claims can never be relied on, and that the doctrine of
equivalents is simply the second prong of every infringe-
ment charge, regularly available to extend protection be-
yond the scope of the claims, then claims will cease to serve
their intended purpose.” Wallace London & Clemco Prods.
v. Carson Pirie Scott & Co., 946 F.2d 1534, 1538 (Fed. Cir.
1991).