Sinclair Wyoming Refining v. A & B Builders

FILED
United States Court of Appeals
PUBLISH Tenth Circuit

UNITED STATES COURT OF APPEALS February 22, 2021

Christopher M. Wolpert
FOR THE TENTH CIRCUIT Clerk of Court
_________________________________

SINCLAIR WYOMING REFINING
COMPANY, a Wyoming corporation,

Plaintiff - Appellant,

v. No. 19-8042

A & B BUILDERS, LTD., a Texas limited
partnership; MATRIX ENGINEERING,
LTD., a Texas limited partnership; HOWE-
BAKER ENGINEERS, LTD., a Texas
limited partnership,

Defendants - Appellees,

SINCLAIR WYOMING REFINING
COMPANY, a Wyoming corporation,

Plaintiff - Appellant,

v. No. 19-8053

APPLIED CONTROL EQUIPMENT,
LLC, a dissolved Colorado limited liability
company, n/k/a Applied Control
Equipment, LLLP, a Colorado limited
liability partnership; INSTRUMENT &
VALVE SERVICES COMPANY, a
Delaware company; FISHER SERVICE
CO., d/b/a Fisher Controls International,
Inc., a Delaware corporation, n/k/a Fisher
Controls International, LLC, a Delaware
limited liability company; EMERSON
PROCESS MANAGEMENT LLLP, a
Delaware limited liability partnership,
 Defendants - Appellees,

and

A & B BUILDERS, LTD., a Texas limited
partnership; MATRIX ENGINEERING,
LTD., a Texas limited partnership; HOWE-
BAKER ENGINEERS, LTD., a Texas
limited partnership,

Defendants.
_________________________________

Appeal from the United States District Court
for the District of Wyoming
(D.C. No. 2:15-CV-00091-ABJ)
_________________________________

Brad W. Breslau, Cozen O’Connor, Denver, Colorado, (Richard R. Rardin, Susan J.
Lloyd, Cozen O’Connor, Denver, Colorado; Thomas M. Regan, Cozen O’Connor, San
Diego, California; Kevin P. Caraher, Cozen O’Connor, Chicago, Illinois; Geoffrey D.
Farnham, Deneberg Tuffley, Southfield, Michigan, with him on the briefs) for Plaintiff –
Appellant.

Nicholas A. Merrell, (Bennett J. Lee, Varela, Lee, Metz & Guarino, LLP, San Francisco,
California, with him on the brief); Randy L. Sego, (J. Scott Lasater and April D. Moore,
Lasater & Martin, P.C. Highlands Ranch, Colorado with him on the brief); Patrick D.
McVey, Fox Rothschild LLP, Seattle, Washington, (James F. Bennett, Dowd Bennett
LLP, St. Louis, Missouri; Paul J. Hickey, Hickey & Evans, LLP, Cheyenne, Wyoming
with him on the brief) for Defendants – Appellees.
_________________________________

Before MATHESON, SEYMOUR, and KELLY, Circuit Judges.
_________________________________

MATHESON, Circuit Judge.
_________________________________
 Table of Contents

I. Background ................................................................................................................... 2
A. Appellees............................................................................................................. 2
CB&I Defendants................................................................................................ 2
ACE..................................................................................................................... 3
IVS Defendants ................................................................................................... 3
B. Factual Background ............................................................................................ 3
The Unit’s Origins .............................................................................................. 3
Process Design by Fluor Corporation ................................................................. 4
EPC Contract ...................................................................................................... 4
ACE Contract ...................................................................................................... 5
Solicitation of the ACE Contract..................................................................... 5
Valve inspection by IVS .................................................................................. 7
Design and manufacture of FV-241 ................................................................ 7
Project Completion ............................................................................................. 9
2009 Refinery Fire and Brinell Testing by J.R. Eggleston ............................... 10
2013 Refinery Fire and Explosion .................................................................... 11
C. Procedural Background..................................................................................... 13
D. Legal Background ............................................................................................. 15
Standards of Review ......................................................................................... 15
Dismissal under Rule 12(b)(6) ...................................................................... 15
Summary judgment under Rule 56 ................................................................ 16
Ascertaining Wyoming Law ............................................................................. 16
Wyoming Contract Interpretation Principles .................................................... 17
II. Discussion ................................................................................................................... 18
A. Claims Against the CB&I Defendants .............................................................. 18
Claim 1 - Breach-of-Contract Claim Against Howe-Baker ............................. 19
Additional factual background ...................................................................... 19
Analysis ......................................................................................................... 21
Howe-Baker was not required to plead a contractual limitations defense 21
Article 1.7 bars Sinclair’s breach-of-contract claim against Howe-Baker 22

i
 Claims 2 and 3 - Sinclair’s Negligence Claims Against the CB&I
Defendants ........................................................................................................ 24
Additional legal background ......................................................................... 25
Economic loss rule .................................................................................... 25
Independent duty doctrine ......................................................................... 27
Analysis ......................................................................................................... 29
Sinclair has not identified an independent duty ........................................ 29
Article 1.7 of the EPC Contract bars Sinclair’s negligence claims ........... 31
B. CB&I Defendants’ Indemnity Counterclaim .................................................... 32
The EPC Contract’s Indemnity Provisions ....................................................... 33
Analysis............................................................................................................. 35
The CB&I Defendants may assert their indemnity counterclaim ................. 35
Applicable standard ................................................................................... 35
Application ................................................................................................ 40
The EPC Contract requires Sinclair to indemnify the CB&I Defendants ..... 42
C. The Eggleston Order ......................................................................................... 44
Additional Factual and Procedural Background ............................................... 45
Reviewability of the Eggleston Order .............................................................. 47
Whether the Eggleston Order was Error ........................................................... 52
Additional legal background ......................................................................... 52
Analysis ......................................................................................................... 53
D. Claims Against ACE and the IVS Defendants ................................................. 56
Claim 4 - Sinclair’s Breach-of-Contract Claim Against ACE Based on the
Metallurgy Theory ............................................................................................ 56
Claims 5 and 6 - Sinclair’s Negligence and Strict Products Liability Claims
Against ACE and the IVS Defendants Based on the Metallurgy Theory ........ 59
Additional legal background ......................................................................... 59
Analysis ......................................................................................................... 61
Claim 7 - Sinclair’s Failure-to-Warn Claim Against ACE and the IVS
Defendants ........................................................................................................ 63
Sinclair knew before 2013 that FV-241 was made from carbon steel .......... 64
Additional legal background ..................................................................... 64
Analysis ..................................................................................................... 65

ii
 Failure-to-warn claim based on FirstVue’s limitations ................................. 69
Legal standards .......................................................................................... 70
Analysis ..................................................................................................... 70
Sinclair’s Remaining Claims Based on the OEM Specifications Theory ........ 72
III. Conclusion .................................................................................................................. 73

iii
 On September 27, 2013, a refinery unit (“Unit”) at the Sinclair Wyoming Refinery

Co. (“Sinclair”) in Sinclair, Wyoming caught fire and exploded because its “FV-241”

control valve fractured and released flammable hydrogen gas. A high temperature

hydrogen attack (“HTHA”), a chemical reaction, weakened the valve and caused the

fracture. FV-241 was made from carbon steel, which is more susceptible to HTHA than

stainless steel.

Sinclair had purchased the Unit in 2004. Sinclair moved the Unit from California

to Wyoming and converted it from its previous use to a hydrotreater, a refinery unit that

introduces hydrogen to remove impurities from the product stream. Sinclair contracted

the design, engineering, and construction work to other companies. During the moving

and conversion process, FV-241 was remanufactured and installed on the Unit. Work on

the Unit was completed in 2006.

Following the 2013 explosion and fire, Sinclair brought this diversity action

against seven companies involved in dismantling the Unit, converting it to a hydrotreater,

rebuilding it in Wyoming, and remanufacturing and installing FV-241. The Defendants,

now Appellees, divide into three groups:

1. Howe-Baker Engineers, Ltd. (“Howe-Baker”) and its subcontractors, A&B
Builders, Ltd. (“A&B”) and Matrix Engineering, Ltd. (“Matrix”) (collectively,
“CB&I Defendants”), which provided construction and field engineering
services;

2. Applied Control Equipment, LLC (“ACE”), which contracted with Sinclair to
repair, refurbish, or replace valves from the Unit including FV-241; and

3. Emerson Process Management, LLLP (“Emerson”), Fisher Services Co.
(“Fisher”), and Instrument & Valve Services Co. (“IVS”) (collectively, “IVS

1
 Defendants”), which—through ACE—provided valve inspection, repair, and
replacement services.

Sinclair alleged various contract and tort claims. The district court granted several

motions to dismiss and motions for summary judgment that eliminated all of Sinclair’s

claims. The court also entered summary judgment in favor of the CB&I Defendants’

indemnity counterclaim.

Exercising jurisdiction under 28 U.S.C. § 1291, we affirm.

I. BACKGROUND

The following provides (A) additional information about the three groups of

Appellees, (B) factual background, (C) procedural background, and (D) applicable legal

standards.

A. Appellees

CB&I Defendants

The CB&I Defendants consist of Howe-Baker, A&B, and Matrix. 1 Howe-Baker

entered into the Engineering, Procurement, and Construction Contract (“EPC Contract”)

with Sinclair to perform construction and engineering work on the Unit. Howe-Baker

subcontracted the construction to A&B and the engineering to Matrix. A&B installed

FV-241 on the Unit.

1
CB&I stands for Chicago Bridge & Iron Co., which previously owned the CB&I
Defendants. McDermott International, Inc. now owns these businesses.

2
 ACE

ACE contracted with Sinclair (the “ACE Contract”) to inspect, repair, and replace

valves from the Unit. It coordinated with the IVS Defendants as a parts broker.

IVS Defendants

The IVS Defendants consist of Emerson, Fisher, and IVS. Emerson Electric Co.

owns all three.

Through a “Representative Agreement,” Emerson appointed ACE as a “sales,

engineering, and service representative for” products sold by certain “Emerson

Companies,” including Fisher. App. at 9541, 9555.

Fisher was the original equipment manufacturer (“OEM”) of FV-241. Fisher also

developed FirstVue, the software program that ACE used to generate specifications for

FV-241.

IVS is a division of Emerson. Id. at 9528 (ACE’s proposal to Sinclair, which

describes “Emerson’s Instrument and Valve Service Division”); id. at 9561

(Representative Agreement’s description of IVS as part of Emerson’s Process Systems &

Solutions Division). IVS repairs and remanufactures valves. It remanufactured FV-241.

B. Factual Background

The material facts are undisputed unless otherwise noted.

The Unit’s Origins

In 2004, Sinclair purchased the Unit, which was then a hydrocracker—a refinery

unit that introduces hydrogen at high temperatures and high pressure to “crack” larger

hydrocarbon molecules into smaller ones. App. at 1723 (SAC); id. at 14,917 (declaration

3
of Bill Walters, Sinclair engineer). Sinclair arranged to dismantle the Unit in California,

convert it into a hydrotreater, and rebuild it at its refinery (“Refinery”) in Wyoming.

Process Design by Fluor Corporation

Fluor Corporation (“Fluor”), a nonparty to this action, had provided engineering

input for the Unit when it was first constructed in the 1970s or 1980s. Sinclair retained

Fluor to help convert the Unit from a hydrocracker to a hydrotreater. Sinclair charged

Fluor with preparing a “process design,” which yielded detailed specifications for the

Unit’s conversion. This left some field engineering work to be completed by the CB&I

Defendants. App. at 2942-43, 2953, 2960-62.

Sinclair, Fluor, and another firm collaborated to create “piping and

instrumentation diagrams” (“P&IDs”) for the Unit. Id. at 2953-56. Sinclair viewed the

P&IDs as “the controlling document[s] for the construction of [the Unit],” akin to a

“[B]ible.” Id. at 2957. Consistent with Fluor’s process design, the P&IDs instructed that

FV-241 and the line of pipes connected to it should be made from stainless steel. Id. at

2956; id. at 10,509 (explaining the relationship between Fluor’s work and the third firm’s

work); see id. at 2898 (deposition testimony of Albert Gualtieri, Sinclair’s Manager of

Capital Projects); id. at 3106 (Sinclair’s admission that Fluor provided specifications that

specified metallurgy for the Unit’s valves and piping).

EPC Contract

In February 2005, Sinclair and Howe-Baker entered into the EPC Contract.

Howe-Baker subcontracted its construction obligations under the EPC Contract to A&B

4
and its engineering responsibilities to Matrix. Two articles in Part III of the EPC

Contract are particularly relevant. 2

First, Article 1 (including subsidiary Articles 1.1 to 1.7) sets out Howe-Baker’s

guarantees and warranties, creates a warranty claims process for disputes about the

quality of Howe-Baker’s work, provides that this process is Sinclair’s exclusive remedy

under the EPC Contract, and limits Howe-Baker’s liability outside of the process.

Second, Article 28 (including subsidiary Articles 28.1 to 28.4) includes cross-

indemnification provisions applicable to Howe-Baker and Sinclair.

ACE Contract

Solicitation of the ACE Contract

The EPC Contract required Sinclair to provide purchased materials and equipment

for the Unit. App. at 1294 (contract amendment). To do so, Sinclair solicited bids for the

inspection and the repair or replacement of the Unit’s control valves, including from

ACE. Id. at 9541. As part of this solicitation, Sinclair provided a spreadsheet containing

“process information” about the operating conditions each valve would experience after

the Unit’s conversion, including:

• the type of liquid the valve would carry (in FV-241’s case, hydrogen);

• the viscosity and flow rate of that liquid;

• temperatures; and

2
The EPC Contract refers to its provisions as both “Articles” and “Sections.” We
refer to its provisions as “Articles” for consistency’s sake. Except as otherwise specified,
we use the term “Article” to refer to articles in Part III of the EPC Contract.

5
 • pressures.

Id. at 9513-14 (spreadsheet); id. at 9519-20 (deposition testimony of Brian McManus,

ACE).

The “process information” for FV-241 said it would carry high-temperature, high-

pressure hydrogen. The parties agree this created the risk of HTHA, and FV-241

therefore should have been made from stainless steel, not carbon steel. See, e.g., id. at

9306 (declaration of Dr. Bastiaan Cornelissen, Sinclair’s retained metallurgy expert);

Aplee. CB&I Br. at 13 n.4; Aplee. IVS Br. at 29; Aplee. ACE Br. at 36.

ACE proposed to inspect valves from the Unit and to repair or replace them as

necessary. App. at 9526. Its proposal described the “work scope” as follows:

The initial scope consists of opening and inspecting 68
control valves. After inspection, we will come to you with
our best recommendation as to whether it will be more cost
effective for you to go ahead and complete the repair (valve is
in pretty good shape), rework or replace the trim (valve needs
attention), or replace the valve with a newly remanufactured
[Fisher] Encore valve (valve is in bad shape.)[.]

Id. at 9528.

The proposal also represented that “[a]ll new or [remanufactured Fisher] Encore

valves will be run through Fishers [sic] sizing program to guarantee performance in the

application specified.” Id. at 9529. The parties agree that “Fishers [sic] sizing program”

referred to FirstVue, the Fisher software program that ACE later used to generate

specifications for FV-241.

Sinclair accepted ACE’s proposal by placing a purchase order.

6
 Valve inspection by IVS

As coordinated by ACE, IVS received and inspected valves from Sinclair,

including “FV-10,” FV-241’s predecessor on the pre-conversion Unit. IVS noted that

FV-10 was made from stainless steel. App. at 9663 (“Customer Repair Report”); id. at

9668-69 (deposition testimony of Doug Smith, IVS employee who inspected FV-241).

Although FV-10 was in repairable condition, problems with FV-10’s serial numbers

prevented IVS from verifying that it complied with certain corrosion prevention and

control standards. Id. at 2811 (declaration of Patrick Reilly, IVS’s Rule 30(b)(6)

witness); id. at 3203-04; 3213-15 (Reilly deposition testimony); id. at 9669-70 (Smith

deposition testimony). IVS informed ACE about these problems, and ACE—based on its

understanding that Sinclair required compliance with those standards—determined that

FV-10 should be scrapped and replaced with a compliant valve. See id. at 3318

(deposition testimony of Richard “Dick” Edwards, Sinclair employee who corresponded

with ACE).

Design and manufacture of FV-241

ACE then generated a quote and proposed specifications for FV-241 to replace

FV-10. When developing specifications for FV-241, ACE did not rely on FV-10’s

specifications and instead “start[ed] from scratch.” App. at 3250 (deposition testimony of

Stan Burns, ACE); accord id. at 3206-07 (deposition testimony of Patrick Reilly, IVS’s

Rule 30(b)(6) witness).

To develop the specifications for FV-241, Stan Burns—Sinclair’s principal point

of contact at ACE—relied on the “process information” in the spreadsheet provided by

7
Sinclair. Id. at 3251-52 (Burns deposition testimony); see id. at 3231-34 (deposition

testimony of Randall Schrader, ACE’s Rule 30(b)(6) witness). Mr. Burns focused on

supplying a valve having the mechanical strength to withstand the temperatures,

pressures, and flow conditions to which FV-241 would be subjected. See id. at 3241,

3250, 3252 (Burns deposition testimony); id. at 9520 (McManus deposition testimony).

He did not consider whether the metallurgy of FV-241 was chemically compatible with

the hydrogen that it would handle. Id. at 3256-57. In other words, Mr. Burns focused on

whether FV-241 was strong enough to function under certain conditions rather than

whether FV-241 was resistant to HTHA or other chemical reactions that could degrade it.

Mr. Burns used FirstVue, the valve sizing software referenced in the ACE

Contract, to generate the specifications for FV-241. Id. at 3241-42. In November 2005,

he provided a quote and proposed specifications for FV-241 to Dick Edwards, his point

of contact at Sinclair. Mr. Burns and Mr. Edwards expected that FV-241 would be a

remanufactured Fisher “Encore” model carbon steel valve with “integral flanges”—

flanges cast onto it as part of the valve body. Id. at 13,807 (Edwards deposition

testimony); id. at 13,812 (quotation); see id. at 11,692 (correspondence between Mr.

Burns and Mr. Edwards).

IVS did not have in stock a valve core with integral flanges that could be used to

remanufacture FV-241. ACE therefore told Sinclair that IVS could make FV-241 by

welding flanges onto a valve core with “buttweld ends”—ends that do not have flanges

and are tapered so that other components easily can be welded onto them. Id. at 11,692

(correspondence between Mr. Burns and Mr. Edwards).

8
 In February 2006, Mr. Burns sent another quote and specifications to Mr. Edwards

for a version of FV-241 made from a buttweld end valve core with flanges welded onto

it. The quote and specifications again described FV-241 as made from carbon steel. Id.

at 3341 (“WCB Carbon STL Cast”). Sinclair purchased FV-241 from ACE. ACE then

issued a purchase order to IVS, which remanufactured FV-241 from an existing carbon

steel buttweld end valve core and welded carbon steel flanges onto it. 3 Id. at 3218-19.

Project Completion

Sinclair received FV-241 from IVS in April 2006. App. at 2823 (Sinclair

“Incident Investigation” document). FV-241 was marked as made from carbon steel on

(1) abbreviations on its actuator tag, 4 (2) cast lettering on the valve body, and (3) imprints

on both valve flanges. Id. at 2827 (“Incident Investigation” document); id. at 17,666

(Sinclair’s admissions). A day after Sinclair received FV-241, ACE emailed to Sinclair

specification sheets for the Unit’s control valves. Id. at 3372 (covering email); id. at

3103-04 (Sinclair’s admission). The specification sheets again said that FV-241 was

made from carbon steel. Id. at 3394 (specification sheet); id. at 3103-04 (Sinclair’s

admission).

3
The district court held, and the parties do not dispute for the purposes of this
appeal, that the ACE Contract consisted of ACE’s proposal, Sinclair’s purchase order
accepting the proposal, and ACE’s February 2006 quote for FV-241. App. at 18,309.
4
This is a tag attached to FV-241’s actuator, the component that opened and
closed the valve.

9
 FV-241 in 2006. The grey portion is the valve body, which is
at issue in this litigation. The green portion is an actuator that
controls the valve. The actuator is not at issue.

Sinclair did not check FV-241’s metallurgy upon receiving it at the Refinery. Id.

at 2823. Sinclair turned FV-241 over to A&B, which installed it on the Unit. See id. at

9317 (Cornelissen expert report).

2009 Refinery Fire and Brinell Testing by J.R. Eggleston

In March 2009, the Unit caught on fire. During a damage assessment, Sinclair

removed FV-241 from the Unit because parts of the valve had been visibly damaged.

App. at 6629-30.

The parties dispute whether J.R. Eggleston, Sinclair’s inspection supervisor at the

Refinery, performed Brinell testing—a form of hardness testing—on FV-241 after the

2009 fire. A Brinell test can be used to determine whether carbon steel has been

10
weakened, but it is not an effective way to test the strength of stainless steel. Id. at 6581,

6647-67. In July 2017, Mr. Eggleston testified that he performed a Brinell test on

FV-241 in 2009 because he knew it was made from carbon steel and not stainless steel.

Id. After the deposition, he submitted an addendum and errata sheets that retracted his

testimony. He also submitted to a second deposition to explain his retractions. As

explained later in this opinion, ACE and the IVS Defendants successfully moved to strike

the addendum and portions of the errata sheets that retracted Mr. Eggleston’s deposition

testimony about having performed Brinell testing on FV-241 in 2009.

2013 Refinery Fire and Explosion

In September 2013, FV-241 fractured on one of its welded-on flanges, “a short

distance downstream of the . . . weld” that connected the flange to the valve core. App. at

9320 (Cornelissen expert report); see id. at 2823 (Sinclair “Incident Investigation”

document). HTHA caused the fracture. Hydrogen gas escaped from the fracture, ignited,

and exploded.

11
Image of FV-241 after it fractured. The right-hand side of the
valve is missing its flange.

Close-up image of FV-241 after it fractured. The arrow
points to the weld that connected FV-241’s valve body to its
welded-on flanges.

12
 Sinclair reports damages of approximately $117.35 million: $48.19 million for

repairs and $69.16 million for business interruption. Id. at 10,851-54, 15,073.

Sinclair attributes the failure of FV-241 to two causes: (1) FV-241 was made from

carbon steel instead of stainless steel, making it more susceptible to HTHA (“Metallurgy

Theory”); and (2) FV-241’s welded-on flanges had a wall thickness thinner than Fisher’s

OEM specifications (“OEM Specifications Theory”).

C. Procedural Background

In the operative second amended complaint (“SAC”), Sinclair asserted seven

claims:

1. Breach of contract against Howe-Baker;

2. Negligence against the CB&I Defendants;

3. Negligence of subcontractors against the CB&I Defendants;

4. Breach of contract against ACE based on the Metallurgy Theory and OEM
Specifications Theory;

5. Negligence against ACE and the IVS Defendants based on the Metallurgy
Theory and the OEM Specifications Theory;

6. Strict products liability against ACE and the IVS Defendants based on the
Metallurgy Theory and the OEM Specifications Theory; and

7. Failure to warn against ACE and the IVS Defendants based on the Metallurgy
Theory, and failure to warn that FirstVue could not verify that a valve was
made from the correct metallurgy.5

5
The district court was unsure whether Sinclair had brought a failure-to-warn
claim against ACE and the IVS Defendants based on the OEM Specifications Theory.
App. at 18,336 (addressing such a claim “if [Sinclair] raises one”). In its opening brief,
Sinclair did not advance this theory as to its failure-to-warn claim. Aplt. Br. at 73.

13
 Seven of the district court’s orders are at issue. The orders addressed motions to

dismiss (“MTDs”), motions for summary judgment (“MSJs”), and the motion by ACE

and the IVS Defendants to strike changes to Mr. Eggleston’s testimony. Through these

orders, the district court dismissed or granted summary judgment against all of Sinclair’s

claims and granted summary judgment in favor of the CB&I Defendants’ indemnity

counterclaim to require Sinclair to pay their costs of defending this action:

1. A January 2018 order (“CB&I MTD Order”) that dismissed Sinclair’s
negligence claims against the CB&I Defendants under Rule 12(b)(6), App. at
2003;

2. A July 2018 order by the magistrate judge (“Eggleston Order”) that struck Mr.
Eggleston’s addendum to his deposition testimony and struck in part his errata
sheets, id. at 16,081;

3. A June 2019 order (“Howe-Baker MSJ Order”) that granted summary
judgment against Sinclair’s first claim for breach of contract against Howe-
Baker, id. at 18,210;

4. Another June 2019 order (“CB&I MSJ Order”) that granted summary
judgment in favor of the CB&I Defendants’ indemnity counterclaim, id. at
18,232;

5. Another June 2019 order (“Omnibus Order”) that partly granted summary
judgment against Sinclair’s fourth through seventh claims, id. at 18,272;

6. A July 2019 order (“Omnibus Reconsideration Order”) that denied Sinclair’s
motion to reconsider the Omnibus Order, id. at 18,590; and

7. An August 2019 order (“IVS Second MSJ Order”) that granted summary
judgment against Sinclair’s remaining claims based on the OEM Specifications
Theory, id. at 18,843.

After the Howe-Baker MSJ Order and the CB&I MSJ Order issued, the district

court entered a judgment as to only the CB&I Defendants under Federal Rule of Civil

Procedure 54(b). Sinclair appealed from that judgment. Later, the district court disposed

14
of Sinclair’s remaining claims and entered a final judgment. Sinclair appealed from that

judgment too. 6 We consolidated the two appeals.

D. Legal Background

The following explains (1) three relevant standards of review, (2) how federal

courts ascertain Wyoming law, and (3) Wyoming contract interpretation principles.

Standards of Review

Dismissal under Rule 12(b)(6)

We review de novo a district court’s decision to grant a motion to dismiss for

failure to state a claim. Acosta v. Jani-King of Okla., Inc., 905 F.3d 1156, 1158 (10th Cir.

2018) (citing SEC v. Shields, 744 F.3d 633, 640 (10th Cir. 2014)). We accept “all well-

pleaded factual allegations in the complaint . . . as true,” and we view them “in the light

most favorable to the nonmoving party . . . .” Id. (quoting Moore v. Guthrie, 438 F.3d

1036, 1039 (10th Cir. 2006)). A complaint must allege facts sufficient to state a plausible

claim for relief on its face—that is, “a plaintiff must plead ‘factual content that allows the

court to draw the reasonable inference that the defendant is liable for the misconduct

alleged.’” Id. (quoting Ashcroft v. Iqbal, 556 U.S. 662, 678 (2009)).

6
We asked Sinclair to address whether the district court’s entry of judgment under
Rule 54(b) was proper. Doc. 10663458 at 2-3 (order). After Sinclair responded, the
second judgment adjudicated all remaining claims. Because the second judgment was
final, any concerns about the first judgment are moot.

15
 Summary judgment under Rule 56

“We review the grant of summary judgment by the district court de novo, applying

the same legal standard to the evidence in the record as did the district court.” Shotts v.

GEICO Gen. Ins. Co., 943 F.3d 1304, 1314 (10th Cir. 2019) (quotations omitted). In

doing so, “[w]e view the evidence and draw reasonable inferences in the light most

favorable to the nonmoving party.” Teets v. Great-W. Life & Annuity Ins. Co., 921 F.3d

1200, 1211 (10th Cir. 2019). “The court shall grant summary judgment if the movant

shows that there is no genuine dispute as to any material fact and the movant is entitled to

judgment as a matter of law.” Fed. R. Civ. P. 56(a). But the “mere existence of a

scintilla of evidence in support of the nonmovant’s position is insufficient” to create a

genuine issue or dispute of material fact. Johnson v. Lindon City Corp., 405 F.3d 1065,

1068 (10th Cir. 2005) (quoting Lawmaster v. Ward, 125 F.3d 1341, 1346 (10th Cir.

1997)). To create a genuine issue, “the nonmovant must present facts upon which a

reasonable jury could find in favor of the nonmovant.” Id.

Ascertaining Wyoming Law

Federal courts exercising diversity jurisdiction apply the substantive law of the

forum state—here, Wyoming. Erie R.R. Co. v. Tompkins, 304 U.S. 64, 78 (1938);

McGehee v. Forest Oil Corp., 908 F.3d 619, 624 (10th Cir. 2018). When ascertaining

Wyoming law, we look first to “the most recent decisions of the state’s highest court.”

Wade v. EMCASCO Ins. Co., 483 F.3d 657, 665-66 (10th Cir. 2007). If no controlling

decision exists, we must “attempt to predict how the highest court would interpret the

issue.” Genzer v. James River Ins. Co., 934 F.3d 1156, 1164 (10th Cir. 2019) (quotations

16
omitted). Our predictions may consider appellate decisions in other states with similar

legal principles, federal district court decisions interpreting Wyoming law, and “the

general weight and trend of authority.” Wade, 483 F.3d at 666 (citations omitted). 7 We

do not defer to the district court’s interpretation of Wyoming law. McGehee, 908 F.3d at

624.

Wyoming Contract Interpretation Principles

In Wyoming,

[the] basic purpose in construing or interpreting a contract is
to determine the intention and understanding of the parties. If
the contract is in writing and the language is clear and
unambiguous, the intention is to be secured from the words of
the contract. And the contract as a whole should be
considered, with each part being read in light of all other
parts.

Mountain W. Mines, Inc. v. Cleveland-Cliffs Iron Co., 470 F.3d 947, 951 (10th Cir. 2006)

(quoting Wyo. Game & Fish Comm’n v. Mills Co., 701 P.2d 819, 822 (Wyo. 1985)).

Wyoming courts give contracts their “common sense and plain meaning,” and

“[t]he language of a contract is construed in accordance with what a reasonable person

would understand the terms to mean.” Int’l Surplus Lines Ins. Co. v. Wyo. Coal Refin.

Sys., Inc., 52 F.3d 901, 903 (10th Cir. 1995) (citing State Farm & Cas. Co. v. Paulson,

756 P.2d 764, 765 (Wyo. 1988)); accord Amoco Prod. Co. v. EM Nominee P’ship, 2 P.3d

534, 540 (Wyo. 2000). “The contract is to be interpreted by an objective standard and,

7
We treat as persuasive decisions by intermediate courts of appeal in a state.
Wade, 483 F.3d at 666 (citations omitted). But Wyoming does not have an intermediate
court of appeal.
17
ordinarily, not by the parties’ subjective rendition of the contract.” Int’l Surplus Lines

Ins. Co., 52 F.3d at 903-04 (citing Shrum v. Zeltwanger, 559 P.2d 1384, 1387 (Wyo.

1977)). Wyoming courts presume that each contractual provision has a purpose, avoid

interpretations that would find contracts internally inconsistent, and resist rendering any

provision as surplusage. See Mantle v. N. Star Energy & Constr. LLC, 437 P.3d 758, 781

(Wyo. 2019) (collecting decisions).

When contractual language is unambiguous, contract interpretation is a legal

question left to the court to decide without resort to extrinsic evidence. Sutherland v.

Meridian Granite Co., 273 P.3d 1092, 1095 (Wyo. 2012) (citing Union Pac. Res. Co. v.

Texaco, 882 P.2d 212, 219-20 (Wyo. 1994)). When contractual language is ambiguous, a

court may consider extrinsic evidence. Id. In such circumstances, contractual

interpretation may become a mixed question of law and fact. Springer v. Blue Cross &

Blue Shield of Wyo., 944 P.2d 1173, 1176 (Wyo. 1997). A genuine issue of material fact

about contractual meaning may therefore preclude summary judgment.

II. DISCUSSION

We divide our analysis as follows: (A) Sinclair’s claims against the CB&I

Defendants, (B) the CB&I Defendants’ indemnity counterclaim, (C) Mr. Eggleston’s

testimony, and (D) Sinclair’s claims against ACE and the IVS Defendants.

A. Claims Against the CB&I Defendants

This section addresses (1) Sinclair’s first claim for breach of contract against

Howe-Baker and (2) its second and third claims for negligence and negligence of

18
subcontractors against the CB&I Defendants. We affirm the district court’s dispositions

of all three claims.

Claim 1 - Breach-of-Contract Claim Against Howe-Baker

In the Howe-Baker MSJ Order, the district court granted summary judgment

against Sinclair’s first claim for breach of contract against Howe-Baker.

We begin with additional factual background about Article 1 of the EPC Contract.

We next reject Sinclair’s argument that Howe-Baker waived reliance on Article 1 by not

pleading a contractual limitations period defense in its answers, and we hold that Article

1.7 bars its breach-of-contract claim against Howe-Baker.

Additional factual background

We review several relevant Articles of the EPC Contract.

First, Article 1.1 describes Howe-Baker’s guarantees for design and engineering

work. It states that Howe-Baker will remedy any defects at no cost to Sinclair if it

receives written notice of a defect during the warranty period.

Second, Article 1.2 lists Howe-Baker’s standards for fabricated equipment and

field construction work. It also states that Howe-Baker will remedy any defects at no

cost to Sinclair if it receives written notice of a defect during the warranty period.

Third, Articles 1.4 and 1.5 establish warranty periods and procedures:

1.4 Warranty Period: Contractor’s guarantees set forth in
[Articles] 1.1, 1.2 and 1.3 shall extend for twelve (12) months
from Mechanical Completion.[8] Any period wherein the

8
“Mechanical Completion” is a contractual term of art. App. at 970. The parties
agree that Mechanical Completion occurred in 2006. Id. at 18,213 n.1.

19
 Work is not available for use and/or is limited in use due to
defects in materials, workmanship or engineering furnished
by Contractor shall extend the guarantee period by an equal
period of time.

1.5 Contractor’s Failure to Respond to Warranty Claim: In
the event Contractor . . . shall fail to promptly and adequately
correct . . . defects, Sinclair shall have the right to correct or
to have such defects corrected for the account of Contractor,
and Contractor shall promptly pay Sinclair the costs incurred
in correcting such defects.

App. at 1263.

Fourth, Article 1.7 includes an exclusive-remedies clause, disclaims any other

warranties or guarantees, and limits Howe-Baker’s liability:

Limitation: All warranties of any nature made by Contractor
[i.e., Howe-Baker] in connection with the work are limited to
those set forth in this Article 1. Contractor disclaims all
statutory, oral, expressed or implied warranties, including
warranties of merchantability or fitness for a particular
purpose, and warranties arising from course of dealing or
trade usage. Sinclair shall allow Contractor to perform tests
and/or remedial services at a mutually agreeable time . . . .
The remedies of Sinclair set forth in this Article 1 constitute
Sinclair’s sole and exclusive recourse with respect to the
quality of the work, and Sinclair shall release contractor from
any liability in excess thereof, regardless of Contractor’s
fault, negligence or strict liability. Such exclusive remedies
shall not be deemed to have failed for their essential service
so long as Contractor is willing and able to repair or replace
the defective work as prescribed above. Contractor shall have
no liability unless notified in writing of a defect within 12
months of Mechanical Completion consistent with the
conditions stated in Article 1.0.

Id. at 1263 (emphasis added).

Article 1 thus restricts Sinclair from bringing breach-of-contract claims against

Howe-Baker because it

20
 • states the standards that govern Howe-Baker’s performance;

• creates a warranty claims process in case Sinclair discovers a defect in the Unit
whereby Sinclair must give written notice to Howe-Baker within a year of
Mechanical Completion, and Howe-Baker must remedy any defects at no cost
to Sinclair;

• specifies that Article 1’s warranty claims process is Sinclair’s exclusive
remedy as to the quality of work; and

• releases Howe-Baker from any other liability regardless of its fault, negligence,
or strict liability.

Analysis

The district court granted summary judgment to Howe-Baker on Sinclair’s

breach-of-contract claim. It permitted Howe-Baker to assert a contractual limitations

defense despite not pleading one, and held that Article 1 creates a 12-month contractual

limitations period that bars Sinclair’s breach-of-contract claim against Howe-Baker.

App. at 18,220-23, 18,226-27. We affirm on the alternative ground that (i) Howe-Baker

was not required to plead a contractual limitations defense because its Article 1 argument

is not a contractual limitations defense, and (ii) Article 1.7 bars Sinclair’s breach-of-

contract claim.

Howe-Baker was not required to plead a contractual limitations defense

Sinclair argues that Howe-Baker had to plead a contractual limitations defense to

rely on Article 1 to defend against its breach-of-contract claim. It contends the district

court erred by permitting Howe-Baker to raise a contractual limitations defense despite

not pleading one. This argument is misguided.

21
 A contractual limitations period requires a party to bring an action for breach of

contract within a certain time period after a breach. See Plon Realty Corp. v. Travelers

Ins. Co., 533 F. Supp. 2d 391, 393-94 (S.D.N.Y. 2008) (describing such a provision).

The EPC Contract does not include one. The EPC Contract requires Sinclair to notify

Howe-Baker about defects within a year of the Unit’s Mechanical Completion, but that is

not a deadline to bring a breach-of-contract action. Howe-Baker can rely on Article 1.7

to defend against Sinclair’s breach-of-contract claim because it limits Sinclair’s remedies

for defects in the quality of work to the warranty claims process. Put another way, by

signing the contract, including the exclusive-remedies and limitation-of-liability clauses,

Sinclair waived any right to sue Howe-Baker for breach, and Howe-Baker pled waiver in

its affirmative defenses. App. at 1998.

Article 1.7 bars Sinclair’s breach-of-contract claim against Howe-Baker

Article 1.7’s unambiguous language bars the breach-of-contract claim. Article 1.7

contains (1) an exclusive-remedies clause and (2) a limitation-of-liability clause. It states

that “[(1)] the remedies of Sinclair set forth in this Article 1 constitute Sinclair’s sole and

exclusive recourse with respect to the quality of the work, and [(2)] Sinclair shall release

Contractor from any liability in excess thereof, regardless of Contractor’s fault . . . .”

App. at 1263. Sinclair’s breach-of-contract claim against Howe-Baker seeks recourse

outside the warranty claims process for the quality of the work performed under the EPC

Contract. Article 1.7 plainly bars such a claim.

Sinclair’s arguments to the contrary lack force. First, citing a six-page section of

its SAC, Sinclair contends it “alleged 31 contractual breaches” and that “[o]nly one of

22
those claimed breaches falls within the guarantees/warranties contained in Article [1].”

Aplt. Br. at 39 (citing App. at 1726-31). 9 But Sinclair does not explain or support this

argument and has waived it due to inadequate briefing. See Burke v. Regalado, 935 F.3d

960, 1014 (10th Cir. 2014) (“[A]n appellant may waive an issue by inadequately briefing

it.”). Sinclair does not explain why these alleged breaches fall outside Article 1’s

warranty claims process despite appearing to concern the quality of the work performed

under the EPC Contract. And it does not point to any evidence supporting the alleged

breaches. 10

Second, Sinclair contends that interpreting Article 1.7 as waiving its breach-of-

contract claim against Howe-Baker would be inconsistent with Article 2.3. It points to

the following emphasized language:

2.3 Sinclair and their representatives, and others as may be
required by applicable laws, ordinances and regulations, shall
have the right at all reasonable times to inspect the Work and
all material, supplies, and equipment for the Work at the
jobsite and at Contractor’s and its subcontractors’ shops for
conformance with the Contract. Contractor shall provide, or
cause to be provided access and sufficient, safe and proper
facilities for such inspections. Neither the failure to make
such inspection nor to discover defective workmanship,
materials or equipment, nor approval of or payment to

9
Depending on how one reads it, the SAC appears to allege either 20 or 32
contractual breaches, not 31. App. at 1726-29.
10
MacArthur v. San Juan Cnty., 495 F.3d 1157, 1160 (10th Cir. 2007) (quotations
omitted) (Rule 28(a)(9)(A) of the Federal Rules of Appellate Procedure “requires the
argument section [of an appellant’s brief] to contain ‘appellant’s contentions and the
reasons for them, with citations to the authorities and parts of the record on which the
appellant relies.’”).

23
 Contractor for such Work, materials or equipment shall
prejudice the rights of Sinclair.

App. at 1264.

Sinclair’s argument lacks merit. Article 2.3 permits Sinclair and its

representatives to inspect the work of Howe-Baker and its subcontractors during their

performance. It also states that Sinclair’s rights will not be prejudiced by a failure to

inspect, by approving work, or by making payments to Howe-Baker. It preserves

Sinclair’s warranty claims process rights under Article 1.7, but it does not add to them.

Third, Sinclair argues that Article 1.7 does not apply to its breach-of-contract

claim against Howe-Baker because Article 1 refers to the “warranties” made by Howe-

Baker to Sinclair and does not expressly bar breach-of-contract claims. But Sinclair’s

breach-of-contract claim falls squarely within the limitation-of-liability and exclusive-

remedies clauses in Article 1.7.

* * * *

In sum, we hold that (1) Howe-Baker was not required to plead a contractual

limitations defense to rely on Article 1 of the EPC Contract, and (2) Article 1.7 bars

Sinclair’s first claim for breach of contract against Howe-Baker. We therefore affirm the

district court’s grant of summary judgment against Sinclair’s first claim.

Claims 2 and 3 - Sinclair’s Negligence Claims Against the CB&I Defendants

In the CB&I MTD Order, the district court dismissed Sinclair’s second and third

claims against the CB&I Defendants alleging negligence. The court held that (1)

24
Wyoming’s economic loss rule and independent duty doctrine and (2) Article 1.7 of the

EPC Contract both barred these claims.

Sinclair argues we should reverse these dismissals because its negligence claims

are based on duties independent of the EPC Contract, and because Article 1.7 does not

bar them. We disagree and affirm.

We explain below Wyoming’s economic loss rule and independent duty doctrine

and then evaluate Sinclair’s arguments. We agree with the district court that Sinclair has

failed to identify an independent duty to support its negligence claims. We also agree

that Article 1.7 of the EPC Contract independently bars Sinclair’s negligence claims.

Additional legal background

Economic loss rule

The economic loss rule bars a party to a contract from using a tort claim to recover

contract damages unless the party can show it is owed an “independent duty” in tort

creating a separate entitlement to those damages. The rule does not bar a tort claim to

recover non-contract damages.

The Wyoming Supreme Court has explained that “[t]he ‘economic loss rule’ bars

recovery in tort when a plaintiff claims purely economic damages unaccompanied by

physical injury to persons or property.” Rissler & McMurray Co. v. Sheridan Area Water

Supply Joint Powers Bd., 929 P.2d 1228, 1234 (Wyo. 1996). It “is ‘founded on the

theory that parties to a contract may allocate their risks by agreement and do not need the

special protections of tort law to recover for damages caused by a breach of the

25
contract.’” Id. at 1235 (quoting Sensenbrenner v. Rust, Orling & Neale, Architects, Inc.,

374 S.E.2d 55, 58 (Va. 1988)).

Both Wyoming law and the Restatement (Third) of Torts recognize the economic

loss rule also applies when (1) a contract concerns property, (2) the property is damaged

because of negligent performance of that contract, and (3) a party to that contract brings a

tort claim to seek compensation for that property damage. See Restatement (Third) of

Torts: Liability for Economic Harm § 3 cmt. c & illustrations (Am. L. Inst. 2020). For

example, the Wyoming Supreme Court has held that when damage caused by a defective

purchased product is limited to the product itself and does not extend to persons or other

property, the economic loss rule bars recovery in tort and limits the purchaser to a

contract claim. See Cont’l Ins. v. Page Eng’g Co., 783 P.2d 641, 647-49 (Wyo. 1989)

(explaining the legal and public policy reasons for this decision, and identifying it as the

majority rule); W. Equip. Co. v. Sheridan Iron Works, Inc., 605 P.2d 806, 807 (Wyo.

1980) (“Economic loss includes costs of repair and replacement of defective property

which is the subject of the transaction . . . .” (quoting Salmon Rivers Sportsman Camps,

Inc. v. Cessna Aircraft Co., 544 P.2d 306, 309-10 (Idaho 1975))).

The Wyoming Supreme Court has applied this principle in the construction

context, barring tort claims when property damage is limited to the property at issue in a

construction contract. It has noted that parties to a construction contract have an

opportunity to apportion liability regarding that property by mutual assent, and that

contract damages are usually sufficient compensation to protect a party’s expectation

interest in that property. See Excel Constr., Inc. v. HKM Eng’g, Inc., 228 P.3d 40, 45-46

26
(Wyo. 2010) (apportionment of liability by contract); Rissler & McMurray Co., 929 P.2d

at 1235 (same); JBC of Wyo. Corp. v. City of Cheyenne, 843 P.2d 1190, 1197 (Wyo.

1992) (citing Bowdish v. Johns Creek Assoc., 200 Ga. App. 93 (1991)) (contract law

protects expectation interests); see also Restatement (Third) of Torts: Liability for

Economic Harm § 3 cmt. b (explaining the “[r]ationale” for the economic loss rule).

Independent duty doctrine

The independent duty doctrine is an exception to the economic loss rule. See Dan

B. Dobbs, Paul T. Hayden & Ellen M. Bublick, Dobbs’ Law of Torts § 615 (2d ed. June

2020 update). Under this doctrine, a party to a contract may maintain a tort claim to

recover contract damages if the claim is “predicated on an independent duty.” Excel

Constr., 228 P.3d at 47. 11

In Excel Construction, Inc., the Wyoming Supreme Court described the

independent duty doctrine:

Recovery on a tort theory requires a showing that a duty
independent of contract was violated. Determining whether a
particular . . . tort claim is simply a repackaged contract claim
requires consideration of the conduct alleged, its relationship
to the contractual duties of the parties, the source of the tort
duty alleged to have been breached, and the nature of the
damages claimed.

228 P.3d at 48 (citations omitted).

11
The Restatement (Third) of Torts does not use the term “independent duty
doctrine.” Rather, it categorizes the doctrine as “Professional Negligence Resulting in
Economic Loss.” Restatement (Third) of Torts: Liability for Economic Harm § 4.

27
 In the construction context, the Wyoming Supreme Court has held that an

independent duty can be found in the implied warranty of workmanlike performance:

In construction contracts, there is an implied warranty that the
work will be performed in a skillful, careful, diligent and
workmanlike manner. Where negligence on the part of the
contractor results in a breach of this warranty, a cause of
action ex contractu and a tortious action premised on
negligence, or both, are available to the contractee.

Cline v. Sawyer, 600 P.2d 725, 732 (Wyo. 1979) (collecting decisions and evaluating a

commercial construction contract); accord Rogers v. Wright, 366 P.3d 1264, 1275-76

(Wyo. 2016) (citing Tavares v. Horstman, 542 P.2d 1275, 1282 (Wyo. 1975)).

As Sinclair appears to acknowledge, Aplt. Br. at 27, 30-31, the Wyoming Supreme

Court has held that parties to a contract can agree to waive implied warranties, thereby

waiving the independent duty grounded in the implied warranty. See Rogers, 366 P.3d at

1277 (contract for purchase of new home from a homebuilder).12

12
Both Rogers and Schell v. Scallon, 433 P.3d 879, 886 (Wyo. 2019), a later case
that applied Rogers, addressed contracts for the sale of homes and not commercial
construction and engineering contracts like the EPC Contract. We believe the Wyoming
Supreme Court would recognize that Sinclair could waive any implied warranties in the
EPC Contract. It said in Rogers that it wished to prevent “purchasers [from ignoring]
their negotiated bargain and responsibilities.” Rogers, 366 P.3d at 1277 (citing Greeves
v. Rosenbaum, 965 P.2d 669, 673-74 (Wyo. 1998)). Similarly, for commercial
construction contracts, the Wyoming Supreme Court has stressed that parties may
allocate risks by contract. E.g., Excel Constr., Inc., 228 P.3d at 45-46; Rissler, 929 P.2d
at 1235. The Restatement (Third) of Torts also suggests that sophisticated parties like
these businesses can waive independent duties by contract. Restatement (Third) of Torts:
Liability for Economic Harm § 4 cmt. e.

28
 Analysis

The district court granted summary judgment on Sinclair’s negligence claims

against the CB&I Defendants because Sinclair waived any independent duty the CB&I

Defendants may have owed. App. at 2006-10. On appeal, Sinclair argues that the district

court erred because it can identify an independent duty that exempts its negligence claims

from the economic loss rule. We disagree. Sinclair’s negligence claims fail because (i)

Sinclair has not identified an independent duty that supports them, and (ii) Article 1.7 of

the EPC Contract bars them.

Sinclair has not identified an independent duty

Sinclair argues that an independent duty can be derived from implied warranties in

the EPC Contract or from an industry standard called American Petroleum Institute 941

(“API 941”). We are not persuaded.

In its appeal, Sinclair has not argued that its negligence claims fall outside the

economic loss rule. It argues only that the CB&I Defendants owed independent duties

that exempt its negligence claims from the economic loss rule. Sinclair has therefore

conceded that its negligence claims fail unless it can identify an independent tort duty.13

Sinclair has not identified one. First, it attempts to locate an independent duty in

the warranties that Wyoming law implies in construction contracts. But as the Wyoming

13
Sinclair could have argued on appeal that its negligence claims against the
CB&I Defendants fall outside the scope of the economic loss rule because it seeks tort
damages for damage to property other than the Unit and associated business interruption.
But Sinclair has not made this argument. Even if it had, Article 1.7 of the EPC Contract
would bar these claims.

29
Supreme Court held in Rogers v. Wright, such implied warranties are contractually

waivable. Rogers, 366 P.3d at 1275-77. And in Article 1.7, Howe-Baker disclaimed all

implied warranties. 14 Sinclair therefore cannot argue there are implied warranties in the

EPC Contract that support an independent duty. 15

Second, Sinclair argues that API 941, an American Petroleum Institute standard

concerning metallurgy for control valves and other refinery components, establishes an

independent duty. Sinclair argues the Wyoming Supreme Court held in Rogers v. Wright

14
Sinclair argues the district court should not have applied Article 1.7 to its
negligence claims because the CB&I Defendants did not invoke it. Aplt. Br. at 30-31.
We disagree. The CB&I Defendants moved for dismissal because there was no
independent duty to support Sinclair’s negligence claims. App. at 1769-74. In its
response brief, Sinclair tried to meet its burden to identify an independent duty by
invoking implied warranties in the EPC Contract. Id. at 1825-27. In their reply, the
CB&I Defendants argued that Sinclair failed to meet its burden because it waived any
implied warranties in Article 1.7, consistent with Rogers. Id. at 1861-62.
Sinclair also argues that interpreting Article 1.7 to waive implied warranties would
render as surplusage Articles 28.1.4, 28.4, 50.0, and 51.0. Aplt. Br. at 34. We are
unpersuaded. As the district court observed, Articles 28.1.4, 50, and 51 would still have
effect if Howe-Baker failed to meet its responsibility under the warranty claims process
created by Article 1. App. at 18,228. The same principle applies to Article 28.4.
Sinclair does not address the district court’s reasoning on appeal.
15
Sinclair also attempts to differentiate the subcontractors, A&B and Matrix, from
Howe-Baker, arguing that it did not expressly agree to waive any implied warranties
made by A&B and Matrix. Aplt. Br. at 35-36. But in the construction context, the
Wyoming Supreme Court has held that implied warranties emanate from construction
contracts. E.g., Cline, 600 P.2d at 732 (“In construction contracts, there is an implied
warranty . . . .”). Because A&B and Matrix were not parties to the EPC Contract, the
EPC Contract cannot create implied warranties made by A&B and Matrix to Sinclair.
See Chapman Custom Homes, Inc. v. Dallas Plumbing Co., 445 S.W.3d 716, 718-19
(Tex. 2014) (reaching a similar conclusion under Texas law). And in any case, as we
explain later in this opinion, the exclusive-remedies clause in Article 1.7, which is not
limited to Howe-Baker, otherwise bars Sinclair’s negligence claims against A&B and
Matrix.

30
that industry standards necessarily give rise to independent duties, and that API 941 is a

widely accepted industry standard. Aplt. Br. at 29-30 (citing Rogers, 366 P.3d at 1276).

But Sinclair overreads Rogers, which merely described a South Carolina Supreme Court

ruling that “recognized a legal duty of a [new home] builder to comply with building

codes and industry standards.” Rogers, 366 P.3d at 1276 (citing Kennedy v. Colum.

Lumber & Mfg. Co., 299 S.C. 335 (1989)). Rogers does not support Sinclair’s position

that an industry standard necessarily gives rise to an independent duty between

contracting parties.

Sinclair thus has failed to identify an independent duty that supports its negligence

claims.

Article 1.7 of the EPC Contract bars Sinclair’s negligence claims

Even if Sinclair’s negligence claims arose from an independent duty, the

exclusive-remedies provision in Article 1.7 of the EPC Contract would bar them. The

provision states, “The remedies of Sinclair set forth in this Article 1 constitute Sinclair’s

sole and exclusive recourse with respect to the quality of the work . . . .” App. at 1263.

Sinclair’s negligence claims concern the quality of the work performed under the EPC

Contract. Sinclair argues the work was substandard because FV-241 was installed on the

Unit and caused its failure. The warranty claims process set out in Article 1 is Sinclair’s

exclusive recourse for such matters.

Sinclair argues that Article 1.7 applies only to Howe-Baker and not its

subcontractors. It correctly observes that the release-of-liability clause in Article 1.7 is

limited to Howe-Baker. (“. . . Sinclair shall release [Howe-Baker] from any liability in

31
excess thereof, regardless of [Howe-Baker’s] fault, negligence or strict liability.”) But

the exclusive-remedies clause in Article 1.7 contains no such limitation. (“The remedies

of Sinclair set forth in this Article 1 constitute Sinclair’s sole and exclusive recourse with

respect to the quality of the work . . . .”) The EPC Contract defines “work” broadly to

encompass all work performed under the EPC Contract. See id. at 970 (Part I, Article 1.0

of the EPC Contract, defining “Work”); id. at 981 (scope of work includes sending valves

2 inches and larger to Sinclair and installing and/or reinstalling valves supplied by

Sinclair). And the EPC Contract, many of its schedules, and many of its attachments

contemplate that the “work” will be performed by both Howe-Baker and its

subcontractors. Read plainly and in concert with the rest of the EPC Contract, the

exclusive-remedies provision in Article 1.7 of the EPC Contract extends to A&B and

Matrix.

* * * *

Sinclair has conceded that its negligence claims against the CB&I Defendants fail

unless it can identify an independent tort duty. It has not identified one. Article 1.7 of

the EPC Contract also bars Sinclair’s negligence claims. We therefore affirm the district

court’s dismissal of Sinclair’s second and third claims against the CB&I Defendants

alleging negligence.

B. CB&I Defendants’ Indemnity Counterclaim

In the Howe-Baker MSJ Order, the district court held that Sinclair must indemnify

the CB&I Defendants for their costs of litigation. Sinclair appeals, arguing that (1) the

CB&I Defendants waived their indemnity counterclaim by pleading it in their answer to

32
Sinclair’s original complaint and then failing to replead it in their answers to Sinclair’s

two amended complaints, and (2) the district court erred in finding that the EPC Contract

requires Sinclair to indemnify the CB&I Defendants. We reject these arguments and

affirm.

We first present the EPC Contract’s indemnity provisions. We then determine that

the CB&I Defendants may assert their indemnity counterclaim notwithstanding their

failure to replead it in their answers to Sinclair’s amended complaints. Finally, we turn to

the merits and affirm the district court’s determination that Sinclair must indemnify the

CB&I Defendants for their litigation costs.

The EPC Contract’s Indemnity Provisions

Article 28 of the EPC Contract contains cross-indemnity provisions. The

following provisions are relevant:

28.1 Contractor agrees to defend, indemnify, and hold
harmless Sinclair . . . from and against any claim, demand,
cause of action, liability, loss or expense, arising:

28.1.1 By reason of Contractor’s actual failure to comply with
any law, ordinance, regulation, rule or order, or with this
Contract. . . .

***

28.1.4 FROM DAMAGE TO OR LOSS TO THE
PROPERTY OF SINCLAIR . . . ARISING DIRECTLY
OR INDIRECTLY OUT OF THIS CONTRACT, TO
THE EXTENT CAUSED BY THE NEGLIGENCE OF
CONTRACTOR OR ITS SUBCONTRACTORS, BUT
SUCH LIABILITY SHALL NOT EXCEED TEN
MILLION DOLLARS ($10,000,000) TOTAL
CUMULATIVE LIABILITY, PER OCCURRENCE AND
IN THE AGGREGATE.

33
***

28.2 Contractor’s indemnity obligations shall apply regardless
of whether the party to be indemnified was concurrently
negligent, whether active or passively, excepting only where
the injury, loss or damage was caused by the gross negligence
or willful misconduct of, or by defects in design furnished by,
the party to be indemnified, or as otherwise provided in
[Article] 28.3. Contractor’s defense and indemnity
obligations shall include the duty to reimburse any attorneys’
fees and expenses incurred by Sinclair for legal action to
enforce Contractor’s indemnity obligations and Sinclair
obtains a favorable judgment with respect thereto.

28.3 Sinclair agrees to defend, indemnify and hold harmless
Contractor, its subcontractors and their respective affiliated
companies and all of their directors, officers, employees,
agents and representatives (“Contractor’s Indemnified
Parties”), from and against any claim, demand, cause of
action, liability, loss or expense arising:

28.3.1 By reason of Sinclair’s actual failure to comply with
any law, ordinance, regulation, rule or order, or with this
Contract. This [Article] 28.3.1 includes, but is not limited to,
fines or penalties by government authorities and claims
arising from Sinclair’s actual or asserted failure to pay taxes.

***

28.3.4 FROM DAMAGE TO OR LOSS OF THE
PROPERTY OF SINCLAIR . . . ARISING DIRECTLY
OR INDIRECTLY OUT OF THIS CONTRACT,
HOWSOEVER SUCH DAMAGE OR LOSS SHALL
OCCUR, INCLUDING THE FAULT OR
CONCURRENT OR SOLE NEGLIGENCE (ACTIVE
OR PASSIVE) OF CONTRACTOR OR
CONTRACTOR’S INDEMNIFIED PARTIES, EXCEPT
AS PROVIDED IN [ARTICLE] 28.1.4.

***

28.4 Sinclair’s indemnity obligations shall apply regardless of
whether the party to be indemnified was concurrently or
solely negligent (active or passive). Sinclair’s defense and
34
 indemnity obligations shall include the duty to reimburse any
attorneys’ fees and expenses incurred by Contractor for legal
action to enforce Sinclair’s indemnity obligations and
Contractor obtains a favorable judgment with respect thereto.

App. at 1278-80 (bold typeface and all caps in original; asterisks indicate omitted

paragraphs).

Analysis

We hold the CB&I Defendants may assert their indemnity counterclaim

notwithstanding their failure to replead it in their answers to Sinclair’s amended

complaints. We further hold that the EPC Contract requires Sinclair to indemnify the

CB&I Defendants for their litigation costs.

The CB&I Defendants may assert their indemnity counterclaim

The CB&I Defendants may pursue their indemnity counterclaim because Sinclair

cannot show prejudice from their failure to replead it in their answers to the amended

complaints.

Applicable standard

The Federal Rules of Civil Procedure do not specifically address whether a

defendant that fails to replead a counterclaim in response to an amended complaint may

continue to assert that counterclaim. We have not addressed this issue, and the few

courts that have are divided. 16

16
See e.g., Comprehensive Mfg. Assocs., LLC v. SupplyCore, Inc., No. 3:15-CV-
0835 (TJM-DEP), 2017 WL 2693508, at *3 (N.D.N.Y. May 24, 2017) (collecting cases
and noting that courts are divided); Cario Marine Serv., Inc. v. Homeland Ins. Co. of
N.Y., No. 4:09CV1492 CDP, 2010 WL 4614693, at *1 & n.2 (E.D. Mo. Nov. 4, 2010)
35
 Some courts have held that a counterclaim to an original complaint falls away

unless it is repleaded in later answers to amended complaints. See, e.g., Par Pharm., Inc.

v. QuVa Pharma, Inc., 764 F. App’x 273, 277 n.3 (3d Cir. 2019) (unpublished) (holding

that the Federal Circuit did not have exclusive appellate jurisdiction over an appeal

because the defendant did not replead its patent counterclaims in its amended answers,

and the counterclaims therefore had no legal effect); Johnson v. Berry, 228 F. Supp. 2d

1071, 1079 (E.D. Mo. 2002). The rationale is that an amended answer supersedes

previous answers, “render[ing]” them “of no legal effect.” Par Pharm., Inc., 764 F.

App’x at 277 n.3 (quoting W. Run Student Hous. Assocs., LLC v. Huntington Nat’l Bank,

712 F.3d 165, 171 (3d Cir. 2013)).

But other courts have been more flexible, permitting a defendant to pursue its

counterclaim unless the plaintiff shows that the failure to replead it caused prejudice. For

example, in Hughes v. Abell, 867 F. Supp. 2d 76 (D.D.C. 2012), the court characterized

the plaintiff’s argument that an amended answer that omitted counterclaims nullified

previously pleaded counterclaims as having “some force”:

Federal Rule of Civil Procedure 7 states that “[o]nly these
pleadings are allowed” and then sets forth a list of pleadings
that does not include counterclaims. Rule 13 requires that a
counterclaim be set forth in a pleading. It would be
reasonable to conclude from these two rules that a
counterclaim is not a distinct pleading, but rather must be
included as part of another pleading, such as an answer. And
it is certainly true that “[o]nce an amended pleading is
interposed, the original pleading no longer performs any

(same); 1 Steven S. Gensler & Lumen N. Mulligan, Federal Rules of Civil Procedure,
Rules and Commentary r.15 (Feb. 2020 update) (same).

36
 function in the case.” 6 Charles A. Wright, et al., Fed. Prac.
& Proc. Civ. § 1476 (3d ed.). Accordingly, it is reasonable
for [the plaintiff] to assert that when [the defendant] replaced
its answer with an answer that did not contain counterclaims,
the pleading that was before the Court (the new answer) did
not contain counterclaims.

Id. But the court said “this conclusion would put form over substance.” Id. It

characterized counterclaims as distinct from defenses, admissions, and denials:

An answer and a counterclaim, even if contained in the same
document, serve different functions; the counterclaim shares
more with a complaint, setting out claims against the other
party, than it does with the answer. See Dunkin’ Donuts Inc.
v. Romanias, 2002 WL 32955492, at *1–2, 2002 U.S. Dist.
LEXIS 28405, at *5–6 (W.D. Pa. May 29, 2002). . . . It is not
especially intuitive that a counterclaim is part of the pleading
to which it is attached, nor is it obvious that counterclaims
must be re-pled when an answer with counterclaims attached
is superseded.

Id.

The court permitted the defendant to continue asserting its counterclaims because

the plaintiff did not show that the defendant’s failure to replead caused prejudice or led

the plaintiff to believe that the counterclaims had been abandoned. Id.

The Eighth Circuit in Davis v. White, 794 F.3d 1008 (8th Cir. 2015), reached a

similar conclusion. There, despite failing to replead his counterclaim in his answer to an

amended complaint, the defendant continued to press the counterclaim in discovery

responses, defense counsel continued to describe the defendant as a counterclaimant, and

the plaintiff continued to acknowledge that he was a counterdefendant. Id. at 1015. The

court said:

37
 The Federal Rules of Civil Procedure clearly give a district
court discretion to grant or deny a motion to deem a
counterclaim abandoned [when a defendant fails to include it
in their answer to an amended complaint]. Rule 15(a)(3)
provides that, “[u]nless the court orders otherwise, any
required response to an amended pleading must be made
within the time remaining to respond to the original pleading
or within 14 days after service of the amended pleading,
whichever is later” (emphasis added). Rule 15(a)(2) provides
that the district court “should freely give leave [to amend]
when justice so requires.” Though Rule 13(a)(1) requires that
a compulsory counterclaim be stated in “a pleading,” that
term was used to clarify that counterclaims could be asserted
in pleadings other than “the answer.” See 6 Wright, Miller &
Kane, Federal Practice and Procedure § 1401, at 6–7 (3d ed.
2010). Rule 1 requires that the Federal Rules “be construed
and administered to secure the just, speedy, and inexpensive
determination of every action and proceeding.” Where, as
here, plaintiff is given sufficient notice that defendant is
continuing to pursue a compulsory counterclaim, and plaintiff
would not be unfairly prejudiced if the counterclaim
proceeds, an inflexible rule that counterclaims are always
abandoned if not repleaded would not serve the interests of
justice. See Ground Zero Museum Workshop v. Wilson, 813
F. Supp. 2d 678, 706 (D. Md. 2011).

Id. at 1015-16.

We find Hughes and Davis persuasive because the Federal Rules do not speak

clearly about whether counterclaims must be repleaded in subsequent answers,

counterclaims are distinct from other parts of an answer, and an inflexible rule would not

serve the interests of justice. 17 Hughes and Davis allowed a defendant that failed to

17
As in Hughes, we have said “[a]n amended pleading supersedes the pleading it
modifies and remains in effect throughout the action unless it subsequently is modified.”
Predator Int’l, Inc. v. Gamo Outdoor USA, Inc., 793 F.3d 1177, 1180-81 (10th Cir. 2015)
(quotations omitted).

38
replead a counterclaim in subsequent answers to continue to assert that counterclaim

unless the plaintiff could show he would suffer prejudice. A key consideration is whether

the plaintiff had notice that the defendant intended to continue pursuing the counterclaim.

This prejudice-based approach finds further support in Rule 15. When a district

court decides whether to grant leave to amend under Rule 15(a)(2), it focuses principally

on prejudice: “Refusing leave to amend is generally only justified upon a showing of

undue delay, undue prejudice to the opposing party, bad faith or dilatory motive, failure

to cure deficiencies by amendments previously allowed, or futility of amendment.” Bylin

v. Billings, 568 F.3d 1224, 1229 (10th Cir. 2009) (quoting Frank v. U.S. W., Inc., 3 F.3d

1357, 1365 (10th Cir 1993)). Likewise, when a district court decides whether to permit a

pleading to be amended over an opposing party’s objection under Rule 15(b)(1), its

inquiry also focuses mainly on prejudice. New Mexico v. Dep’t of Interior, 854 F.3d

1207, 1232 (10th Cir. 2017) (citing Green Country Food Mkt., Inc. v. Bottling Grp., 371

F.3d 1275, 1280-81 (10th Cir. 2004)). 18

18
Unless the plaintiff suffers prejudice, Rule 15(b)(1) authorizes a district court to
allow a defendant to conform its pleadings to the evidence and advance new
counterclaims at trial—sometimes even over the plaintiff’s objection. Fed. R. Civ. P.
15(b)(1); see 6A Charles Alan Wright, et al., Federal Practice and Procedure § 1492 (3d
ed. Oct. 2020 update) [hereinafter Wright & Miller]. We have applied Rule 15(b) in this
manner at summary judgment. Ahman v. Furlong, 435 F.3d 1196, 1203 n.1 (10th Cir.
2006) (observing that we have done so but recognizing a circuit split on the issue). If a
district court can consider counterclaims that were never pled, it is reasonable, absent
prejudice, to permit a district court to consider counterclaims that were once pled and not
repleaded.

39
 We agree with the Eighth Circuit that “an inflexible rule that counterclaims are

always abandoned if not repleaded would not serve the interests of justice.” Davis, 794

F.3d at 1016. 19 Applying such a rule “would put form over substance.” Hughes, 867 F.

Supp. 2d at 91. We hold that when a defendant pleads a counterclaim in an answer but

fails to replead that counterclaim in subsequent answers, it may continue to pursue the

counterclaim unless the plaintiff shows that the failure to replead it caused prejudice.

This leaves the question of what standard of review we should apply to a district

court’s decision to permit or bar a defendant from raising a counterclaim that it failed to

replead. We hold the appropriate standard of review is abuse of discretion because we

apply that standard in the analogous Rule 15 context. Bylin, 568 F.3d at 1229 (Rule

15(a)(2)); Green Country Food Mkt., 371 F.3d at 1280 (Rule 15(b)).

Application

Applying this standard here, we conclude the district court did not abuse its

discretion by concluding that the CB&I Defendants’ failure to replead their indemnity

counterclaim did not prejudice Sinclair. The court properly allowed the CB&I

Defendants to continue asserting their indemnity counterclaim.

Sinclair received notice that the CB&I Defendants intended to continue pressing

their indemnity counterclaim. They alleged two counterclaims and one crossclaim in

their first answer, including their indemnity counterclaim. App. at 70-78. The CB&I

19
A flexible approach also avoids harsh results for a defendant-counterclaimant as
to compulsory counterclaims that are barred unless asserted in the pending action.

40
Defendants omitted all three counter/crossclaims from their answers to the first and

second amended complaints, instead of selectively omitting one or two of them. Id. at

1527-39, 1987-2000. In all three of their answers, the CB&I Defendants labeled

themselves as “counterclaimants.” Id. at 70, 1527, 1987. And in discovery responses

postdating their answer to Sinclair’s SAC, they stated that one of their affirmative

defenses was “offset,” which “entitles the CB&I Parties to indemnity from Sinclair as to

any damages, attorneys’ fees, or costs in connection with the instant dispute.” Id. at

5874. Finally, after their answer to the first amended complaint but before their answer

to the SAC, the CB&I Defendants moved to dismiss their crossclaim without prejudice

but did not move to dismiss their counterclaims. Id. at 1742. Though not as strong as the

procedural record in Davis, the foregoing circumstantial evidence was sufficient to notify

Sinclair that the CB&I Defendants wished to continue pursuing their indemnity

counterclaim.

We reject Sinclair’s argument it was prejudiced because “no discovery had been

conducted on indemnity.” Aplt. Br. at 50. The merits of the indemnity counterclaim

concern contract interpretation, and Sinclair has not identified what discovery it would

have sought or what facts it would have established with discovery. Notably, Sinclair

also did not invoke Federal Rule of Civil Procedure 56(d) to seek additional discovery

when opposing the CB&I Defendants’ motion for summary judgment on their indemnity

counterclaim. App. at 15,019-45.

We conclude the district court did not abuse its discretion in allowing the CB&I

Defendants to pursue their indemnity counterclaim.

41
 The EPC Contract requires Sinclair to indemnify the CB&I Defendants

We affirm the district court’s summary judgment ruling that the EPC Contract

requires Sinclair to indemnify the CB&I Defendants for their litigation costs. We first

explain why Howe-Baker owes no indemnity to Sinclair and then address Sinclair’s

indemnity obligations to the CB&I Defendants. Although we do not discuss every point

made by the district court on this issue, we generally agree with its analysis.

Article 28 of the EPC Contract establishes cross-indemnity duties for Howe-Baker

and Sinclair when there is damage or loss to Sinclair’s property. Although these duties

interact in complicated ways, Howe-Baker owes no indemnity to Sinclair under the

circumstances here. Article 28.1.4 requires Howe-Baker to indemnify Sinclair for “any

claim, demand, cause of action, liability, loss or expense arising from damage or loss to

the property of Sinclair . . . arising out of the [EPC Contract],” but only “to the extent

caused by the negligence of [the CB&I Defendants].” As we held above, Sinclair failed

to identify an independent duty that supports its negligence claims against the CB&I

Defendants. Thus, Sinclair cannot contend the “damage or loss to the property of Sinclair

. . . arising out of the [EPC Contract]” was caused by the CB&I Defendants’

negligence. 20

20
The CB&I Defendants also argue Howe-Baker has no indemnity obligations to
Sinclair because the exclusive-remedies clause in Article 1.7 bars Sinclair from seeking
recourse for the quality of the work performed under the EPC Contract outside the
warranty claims process. Aplee. CB&I Br. at 48-49. We agree this is a valid additional
reason that Howe-Baker owes no indemnity to Sinclair.

42
 This leaves only Sinclair’s indemnity obligations to the CB&I Defendants.

Articles 28.3 and 28.3.4 require Sinclair to “defend, indemnify, and hold harmless

[Howe-Baker] . . . [and] its subcontractors . . . from and against any claim, demand, cause

of action, liability, loss or expense arising . . . from damage to or loss of the property of

Sinclair . . . arising directly or indirectly out of this contract.” Under the plain meaning

of these provisions, the CB&I Defendants incurred losses and expenses by litigating this

action due to Sinclair’s “claim, demand, cause of action” arising from “damage to or loss

to the property of Sinclair” arising out of the EPC Contract. We thus affirm the district

court’s holding that Sinclair is required to indemnify the CB&I Defendants for their costs

of defending this action. 21

Sinclair argues that its indemnity obligations extend only to third-party claims

against the CB&I Defendants, and not to claims that Sinclair itself may bring against the

CB&I Defendants. We disagree because Article 28 does not expressly limit Sinclair’s

indemnity obligations to third-party claims. Interpreting Sinclair’s indemnity obligations

to include claims that Sinclair itself may bring against the CB&I Defendants comports

with Article 28 because Sinclair is the party most likely to assert “claim[s], demand[s],

cause[s] of action, liability, loss[es] or expense[s]” against the CB&I Defendants arising

from “damage to or loss of the property of Sinclair” in relation to the EPC Contract. See

App. at 18,260.

21
Sinclair’s indemnity obligations extend to any losses and expenses incurred in
the CB&I Defendants’ defense of this appeal because Article 28.3 extends to “any claim,
demand, cause of action, liability, loss or expense.”

43
 We hold that Articles 28.3 and 28.3.4 require Sinclair to indemnify the CB&I

Defendants for their costs of defending this action. We affirm the district court’s grant of

summary judgment in favor of the CB&I Defendants’ indemnity counterclaim.

C. The Eggleston Order

Sinclair challenges the magistrate judge’s Eggleston Order that denied Sinclair’s

and Mr. Eggleston’s attempt to retract his deposition testimony. At his first deposition,

Mr. Eggleston, Sinclair’s former inspection supervisor at the Refinery, testified he knew

in 2009 that FV-241 was made from carbon steel. He attempted to retract his testimony

by submitting an addendum and errata sheets, and he explained his retractions in a second

deposition. In the Eggleston Order, the magistrate judge struck these retractions under

Federal Rule of Civil Procedure 30(e). We review a district court’s decision to strike or

exclude testimony for abuse of discretion. See Sports Racing Servs. v. Sports Car Club of

Am., 131 F.3d 874, 894 (10th Cir. 1997).

After providing additional background, we reject ACE and the IVS Defendants’

arguments that we lack jurisdiction to review the Eggleston Order or that Sinclair waived

its right to appeal the order by not objecting to it in district court. Reaching the merits,

we hold that the magistrate judge did not abuse his discretion in striking Mr. Eggleston’s

retractions. We therefore affirm the Eggleston Order.

Resolution of this issue affects Sinclair’s seventh claim alleging ACE and the IVS

Defendants breached a duty to warn Sinclair about FV-241’s carbon steel metallurgy and

vulnerability to HTHA. We address the relevance of Mr. Eggleston’s testimony to that

claim later in this opinion.

44
 Additional Factual and Procedural Background

On July 21, 2017, Mr. Eggleston testified about the damage assessment he

performed after the 2009 fire at the Unit. App. at 6636. He testified that he performed

Brinell hardness tests on FV-241, which was “involved in [the] heater” that caught on

fire. Id. at 6644-45. A Brinell hardness test measures “the hardness of a material by

pressing a hardened metal ball against the smooth material surface of the item being

tested,” creating an indent on the material. Id. at 6581 (declaration of Dr. Michael E.

Stevenson, expert for the IVS Defendants).

Mr. Eggleston explained that Brinell testing could be used to determine the

strength of carbon steel, but not stainless steel. Id. at 6647-49; see id. at 6581 (Dr.

Stevenson’s declaration, explaining that for certain materials including carbon steel,

Brinell testing can be used to determine material strength). He testified that he performed

Brinell testing on FV-241 to determine whether it had been weakened by the fire because

the valve was made from carbon steel, and that he would not have performed Brinell

testing on it if it were made from stainless steel. Id. at 6647-49. Mr. Eggleston also

identified several parts of FV-241 on which he performed Brinell testing, including on

both flanges. Id. at 6646, 6661-62, 6667. 22

In August 2017, Mr. Eggleston submitted an addendum and errata sheets to his

deposition testimony. In the addendum, he stated that since his July 21, 2017 deposition,

22
Mr. Eggleston was unable to recall how he reported the results of his testing to
others. App. at 6642-43.

45
he had been given an opportunity to examine FV-241, and he had been unable to find

signs that he had performed Brinell testing on it. Id. at 6781. He recalled that in 2009, he

had tested portions of FV-241’s “control valve actuator, rather than the body or valve

flanges . . . .” Id. He stated that he had not tested the valve body in 2009 because, even

after the fire, a layer of “block insulation” had remained intact on FV-241. Id. Mr.

Eggleston and others at Sinclair had concluded in 2009 that because the insulation was

intact, FV-241’s body and flanges must have been protected from thermal damage. Id.

In December 2017, Mr. Eggleston was deposed a second time. He testified that he

had inspected FV-241 following his first deposition after Sinclair’s counsel suggested he

do so. Id. at 9164-65, 9166-67. He also explained the bases for his addendum and errata

sheets. Id.

The IVS Defendants moved to strike Mr. Eggleston’s addendum and errata sheets.

ACE joined the motion. The parties submitted competing expert reports about whether

FV-241 had indentations consistent with Brinell testing.

In the Eggleston Order, the magistrate judge granted this motion. The order

permitted certain “technical” changes on Mr. Eggleston’s errata sheets “relating to

incorrect spelling, clarification, or changes where the reporter appears to have

misunderstood Mr. Eggleston or made an error.” Id. at 16,085-86. But it struck the

remainder of Mr. Eggleston’s errata sheets and his addendum as sham testimony because

they made material changes that contradicted his deposition testimony. Sinclair did not

file an objection to the magistrate judge’s ruling in the district court.

46
 Reviewability of the Eggleston Order

We first address whether we can review the Eggleston Order. Federal Rule of

Civil Procedure 72(a) addresses magistrate judges’ rulings on non-dispositive matters.

The rule required Sinclair to object in the district court to the Eggleston Order within 14

days. Sinclair did not do so. ACE and the IVS Defendants argue Sinclair’s failure to

object divested us of jurisdiction over the Eggleston Order. Sinclair argues its failure

could result only in non-jurisdictional waiver that we can excuse under an exception to

the “firm waiver rule.” 23 Reconciling conflicting circuit precedent, we agree with

Sinclair.

ACE and the IVS Defendants rely on SEC v. Merrill Scott & Associates, Ltd., 600

F.3d 1262 (10th Cir. 2010), our first published opinion squarely holding that a party’s

failure to object to a magistrate judge’s non-dispositive ruling under Rule 72(a) “strips us

of jurisdiction to review the [magistrate judge’s] challenged order.” Id. at 1269. But our

court’s earlier decisions established that a party’s failure to object under Rule 72(a) is a

non-jurisdictional waiver.

In Niehaus v. Kansas Bar Association, 793 F.2d 1159 (10th Cir. 1986), we said a

party’s failure to object to a magistrate judge’s non-dispositive ruling resulted in waiver.

23
Under the firm waiver rule, “a party who fails to make a timely objection to the
magistrate judge’s [ruling] waives appellate review of both factual and legal questions.”
United States v. Deiter, 890 F.3d 1203, 1211 n.5 (10th Cir. 2018) (quoting Morales-
Fernandez v. INS, 418 F.3d 1116, 1119 (10th Cir. 2005)).

47
793 F.2d at 1164-65. 24 Niehaus also referred to lack of “power” to hear an appeal, id., 25

but this came just after we said “appellants waived their right to appeal,” id. at 1164.

And we concluded at the end of the opinion that “appellants waived their right to appeal.”

Id. at 1165. 26

If Niehaus was unclear about the consequences of failure to object, we resolved

that ambiguity in other decisions preceding Merrill Scott & Associates. First, in Moore v.

United States, 950 F.2d 656 (10th Cir. 1991), although the appellant sought review of a

magistrate judge’s findings and recommendations on a dispositive matter rather than a

non-dispositive ruling, we said, citing Niehaus, “Although we plainly have jurisdiction

over this appeal, we have adopted a firm waiver rule when a party fails to object to the

findings and recommendations of the magistrate.” Id. at 659 (citations omitted); see

24
“Appellees argue that, by failing to file objections to the magistrate’s report with
the district court, appellants waived their right to appeal from the magistrate’s order. We
agree.” Niehaus, 793 F.2d at 1164. “We further hold that, by failing to object to the
magistrate’s order in the district court, appellants waived their right to appeal from that
order.” Id. at 1165.
25
“[F]ederal courts of appeals have held that appeals from magistrates’ rulings
must be to the district courts and that appellate courts are without power to hear appeals
directly from orders of federal magistrates.” Niehaus, 793 F.2d at 1164-65. “[W]e hold
that, since appellants failed to object in the district court to the magistrate’s order, we are
without power to review that order on appeal.” Id. at 1165.
26
We issued Niehaus when courts were “sometimes . . . profligate in [their] use of
[jurisdictional terminology].” Arbaugh v. Y & H Corp., 546 U.S. 500, 510 (2006). Even
if “power” in Niehaus meant jurisdiction, the Supreme Court has instructed courts to give
“no precedential effect” to such “drive-by jurisdictional rulings.” Steel Co. v. Citizens for
a Better Env’t, 523 U.S. 83, 91 (1998) (identifying factors that make a jurisdictional
ruling “drive-by”).

48
Haney v. Addison, 175 F.3d 1217, 1219-20 (10th Cir. 1999) (similar); Ayala v. United

States, 980 F.2d 1342, 1352 (10th Cir. 1992) (similar). Second, and even more on point,

in Frontier Refining, Inc. v. Gorman-Rupp Co., 136 F.3d 695 (10th Cir. 1998), we said,

“In [Niehaus], this court held that a party waives its right to appeal a magistrate judge’s

[non-dispositive order]” when it fails to object to it. Id. at 706 (citing Niehaus, 793 F.2d

at 1165). Finally, in Hill v. SmithKline Beecham Corp., 393 F.3d 1111, 1114-15 (10th

Cir. 2004), we cited Moore and recognized the firm waiver rule applies when a party fails

to object to a magistrate judge’s non-dispositive order. 27

Breaking with the foregoing cases, 28 Merrill Scott & Associates held that a party’s

failure to object to a magistrate judge’s non-dispositive ruling under Rule 72(a) divests us

27
We have also regularly applied the firm waiver rule to Rule 72(a) rulings in
unpublished decisions. E.g., Derrick v. Standard Nutrition Co., 829 F. App’x 857,
863-64 (10th Cir. 2020) (unpublished); Riviera Drilling & Expl. Co. v. Gunnison Energy
Corp., 412 F. App’x 89, 91-92 (10th Cir. 2011) (unpublished); Strope v. Collins, 315 F.
App’x 57, 61-62 (10th Cir. 2009) (unpublished).
But in some unpublished decisions, we have cited Niehaus’s “power” language to
hold we lack jurisdiction when a party has failed to object to a magistrate judge’s non-
dispositive ruling. E.g., Utah v Gollaher, 804 F. App’x 947, 951 (10th Cir. 2020)
(unpublished) (citing Niehaus, 793 F.2d at 1165).
28
We have quoted Niehaus’s “power” language in only one published opinion,
and we did so in a parenthetical without suggesting that a party’s failure to object divests
appellate jurisdiction. Pippinger v. Rubin, 129 F.3d 519, 533 (10th Cir. 1997) (citing
Niehaus, 792 F.2d at 1164-65).
In three other published decisions, we cited Niehaus’s Rule 72(a) analysis but did
not resolve whether it concerned waiver or jurisdiction. Los Alamos Study Grp. v. U.S.
Dep’t of Energy, 692 F.3d 1057, 1064 (10th Cir. 2012); Hutchinson v. Pfeil, 105 F.3d
562, 566 (10th Cir. 1997); Boyd Motors, Inc v. Emps. Ins. of Wausau, 880 F.2d 270, 271
(10th Cir. 1989) (per curiam); but see Moore, 950 F.2d at 659 (interpreting Boyd Motors,
Inc., 880 F.2d at 271, as endorsing the firm waiver approach).

49
of jurisdiction to review it, 600 F.3d at 1269,29 resulting in an intra-circuit conflict. We

resolve that conflict based on our decisions in Niehaus, Moore, Frontier Refining, and

Hill predating Merrill Scott & Associates. See United States v. Rosales-Miranda, 755

F.3d 1253, 1261 (10th Cir. 2014) (“[W]hen faced with an intra-circuit conflict, a panel

should follow earlier, settled precedent over a subsequent deviation therefrom.” (quoting

Haynes v. Williams, 88 F.3d 898, 900 n.4 (10th Cir. 1996))); see also Crowson v. Wash.

Cnty., Utah, 983 F.3d 1166, 1188-89 (10th Cir. 2020) (similar). We thus hold the firm

waiver rule applies when a party fails to object to a magistrate judge’s non-dispositive

ruling under Rule 72(a). 30

29
In Merrill Scott & Associates, 600 F.3d at 1269, we relied on Hutchinson, 105
F.3d at 566. But we did not say in Hutchinson that a party’s failure to raise a Rule 72(a)
objection divests us of jurisdiction.
30
This holding is consistent with the Supreme Court’s statement in Arbaugh:
If the Legislature clearly states that a threshold limitation on a
statute’s scope shall count as jurisdictional, then courts and
litigants will be duly instructed and will not be left to wrestle
with the issue. But when Congress does not rank a statutory
limitation on coverage as jurisdictional, courts should treat
the restriction as nonjurisdictional in character.
546 U.S. at 515-16 (citation and footnote omitted). Neither Rule 72(a) nor 28 U.S.C.
§ 636(b)(1)(A) contains jurisdictional terminology.
There appears to be a circuit split on this issue. For example, the Second, Third,
Sixth, Seventh, and Eleventh Circuits have treated a failure to object as non-jurisdictional
waiver. Marcella v. Cap. Dist. Physicians’ Health Plan, Inc., 293 F.3d 42, 46-47 (2d Cir.
2002); Cont’l Cas. Co. v. Dominick D’Andrea, Inc., 150 F.3d 245, 251 n.9 (3d Cir.
1998); Allen v. Highlands Hosp. Corp., 545 F.3d 387, 406 (6th Cir. 2008); Hunt v.
DaVita, Inc., 680 F.3d 775, 780 n.1 (7th Cir. 2012); Maynard v. Bd. of Regents of the
Div. of Univs. of the Fla. Dep’t of Educ., 342 F.3d 1281, 1286 (11th Cir. 2003). The
D.C. Circuit—and perhaps the First Circuit—have held that the objection requirement is
jurisdictional. CNPq—Conselho Nacional de Desenvolvimento Cientificoe Technologico
v. Inter-Trade, Inc., 50 F.3d 56, 58-59 (D.C. Cir. 1995) (per curiam); see Pagano v.
Frank, 983 F.2d 343, 346 (1st Cir. 1993). The Ninth Circuit has held that a failure to
50
 It follows that Sinclair may appeal the Eggleston Order unless it has waived its

right to do so and no exception to waiver applies. One exception to the firm waiver rule

is “when . . . the interests of justice require review.” Morales-Fernandez, 418 F.3d at

1119 (citations and quotations omitted). Because the Eggleston Order was entered during

a stay that appeared to prevent Sinclair from objecting, either Sinclair did not waive its

right to appeal the Eggleston Order or it was entitled to appeal under the interests-of-

justice exception.

On July 18, 2018, the district court entered a stay pending the resolution of

numerous pending motions. The court “ORDER[ED] a stay in [the action] until [all

pending motions] are resolved,” except “that the parties shall continue to fully brief all

motions which have been filed . . . .” App. at 16,070. Sinclair could reasonably have

inferred that the stay order prohibited it from filing objections to the Eggleston Order,

which was entered on July 24, 2018. The 14-day window to object under Rule 72(a)

ended on August 7, 2018. The district court lifted the stay on June 11, 2019. Dist. Ct.

Doc. 465. If the stay prohibited Sinclair from objecting to the Eggleston Order, Sinclair

did not waive its right to appeal. Even if the stay did not prohibit Sinclair from objecting,

we excuse Sinclair’s waiver under the interests-of-justice exception because Sinclair

could reasonably have interpreted the stay as prohibiting an objection. 31

object results in forfeiture, not waiver. Simpson v. Lear Astronics Corp., 77 F.3d 1170,
1173-75 & n.1 (9th Cir. 1996).
31
During oral argument, the IVS Defendants argued that Sinclair should have
known it could have objected to the Eggleston Order because they filed a motion for
reconsideration on a different matter during the stay. See App. at 18,158 (September 20,
51
 Whether the Eggleston Order was Error

Reaching the merits, we hold the magistrate judge did not abuse his discretion in

striking Mr. Eggleston’s retractions.

Additional legal background

Federal Rule of Civil Procedure 30(e) allows deponents to review their deposition

testimony and make corrections to it:

(e) Review by the Witness; Changes.

(1) Review; Statement of Changes. On request by the
deponent or a party before the deposition is completed, the
deponent must be allowed 30 days after being notified by the
officer that the transcript or recording is available in which:

(A) to review the transcript or recording; and

(B) if there are changes in form or substance, to sign a
statement listing the changes and the reasons for
making them.

Fed. R. Civ. P. 30(e). Under Rule 30(e), “[w]e do not condone counsel’s allowing for

material changes to deposition testimony and certainly do not approve of the use of such

altered testimony that is controverted by the original testimony.” Garcia v. Pueblo

Country Club, 299 F.3d 1233, 1242 n.5 (10th Cir. 2002). 32

2018 motion for reconsideration). But this argument is too conjectural, especially
because their motion came long after the 14-day window for Sinclair to object to the
Eggleston Order under Rule 72(a) had passed.
32
As one court explained:
The purpose of Rule 30(e) is obvious. Should the reporter
make a substantive error, i.e., he reported “yes” but I said
“no,” or a formal error, i.e., he reported the name to be
“Lawrence Smith” but the proper name is “Laurence Smith,”
52
 We evaluate material changes made under Rule 30(e) by applying a test we

developed in the context of sham affidavits. See Burns v. Bd. of Cnty. Cmm’rs of Jackson

Cnty., 330 F.3d 1275, 1281-82 (10th Cir. 2003). Both Rule 30(e) changes and affidavits

that contradict previous testimony raise concern that the witness is trying to create a sham

issue of fact. Id. at 1282. To determine whether an affidavit or a Rule 30(e) change is a

sham, we apply the Burns/Franks factors:

1. “whether the [deponent] was cross-examined during his earlier testimony”;

2. “whether the [deponent] had access to the pertinent evidence at the time of his
earlier testimony or whether the [change to deposition testimony] was based on
newly discovered evidence”; and

3. “whether the earlier testimony reflects confusion which the [Rule 30(e)
correction] attempts to explain.”

Id. (quoting Franks v. Nimmo, 796 F.2d 1230, 1237 (10th Cir. 1986)).

Analysis

Sinclair argues the magistrate judge erred by applying the Burns/Franks factors to

decide whether to exclude Mr. Eggleston’s errata sheets and addendum to his first

deposition testimony. It contends the Burns/Franks factors apply only to party deponents

then corrections by the deponent would be in order. The Rule
cannot be interpreted to allow one to alter what was said
under oath. If that were the case, one could merely answer
the questions with no thought at all then return home and plan
artful responses. Depositions differ from interrogatories in
that regard. A deposition is not a take home examination.
Greenway v. Int’l Paper Co., 144 F.R.D. 322, 325 (W.D. La. 1992) (quoted with
approval in Garcia, 299 F.3d at 1242 n.5, and BancFirst ex rel. Est. of M.J.H. v. Ford
Motor Co., 422 F. App’x 663, 666 (10th Cir. 2011) (unpublished)).

53
and only to deposition testimony considered at summary judgment. But neither Burns,

Franks, nor Rule 30(e) impose these limitations, and Sinclair tried to rely on Mr.

Eggleston’s retractions to oppose summary judgment. Sinclair also contends that the

Burns/Franks factors do not apply because “objective” evidence supported Mr.

Eggleston’s proposed changes to his testimony. Aplt. Br. at 89-90. But the Burns/Franks

factors account for changes to testimony without distinguishing whether they were based

on objective or subjective evidence. Burns, 330 F.3d at 1281-82 (discussing Franks, 796

F.2d at 1237). We therefore apply the Burns/Franks factors and hold the magistrate

judge did not abuse his discretion by excluding as a sham Mr. Eggleston’s addendum and

portions of his errata sheets that made material changes to his testimony.

All three factors support exclusion of Mr. Eggleston’s retractions. First, Sinclair’s

counsel was present at Mr. Eggleston’s first deposition and had an opportunity to cross-

examine him, but chose not to. Second, FV-241 was not newly discovered evidence. It

was remanufactured and installed on the Unit in 2006. Mr. Eggleston inspected it in

2009 after the fire. Sinclair contacted Mr. Eggleston about a year before his first

deposition and had ample opportunity to give Mr. Eggleston access to it. App. at 6659.

Third, Mr. Eggleston did not exhibit confusion during his first deposition. Our review of

the transcript shows that he understood the questions and answered them confidently with

details. He exhibited sound recall.

Sinclair’s arguments to the contrary are not convincing. First, it argues FV-241

was “newly discovered evidence” because it was new to Mr. Eggleston. But, as

discussed above, FV-241 was not newly discovered. And FV-241 was not new to Mr.

54
Eggleston; he showed familiarity with it in his first deposition. E.g., id. at 6645 (recalling

that FV-241 had a “similar construction” as its sister valve, FV-240); id. at 6652

(recalling that FV-240 and FV-241 had been “identified as long lead-time items” for

which an immediate damage assessment was needed after the 2009 fire).

Second, Sinclair argues FV-241 was not available to Mr. Eggleston before his first

deposition because showing it to him was logistically challenging. But the record shows

the opposite: FV-241 was available, but Sinclair made no effort to show it to Mr.

Eggleston. In fact, shortly after Mr. Eggleston’s first deposition on July 21, 2017,

Sinclair suggested that Mr. Eggleston see FV-241. Id. at 9162-65. On or around August

26, 2017, he drove from Dumas, Texas to Denver to view FV-241, which indicates he

could have viewed FV-241 before his first deposition. Id. at 9162-67.

Third, Sinclair argues Mr. Eggleston must have been confused during his first

deposition because Dr. Cornelissen, its metallurgy expert, did not find Brinell testing

marks on FV-241 consistent with Mr. Eggleston’s testimony. We disagree. Sinclair does

not identify a single passage of Mr. Eggleston’s first deposition that indicates confusion.

As noted above, nor have we.

* * * *

Considering the Burns/Franks factors, we see no abuse of discretion in the

magistrate judge’s decision to strike the addendum and portions of the errata sheets to

Mr. Eggleston’s first deposition that retracted his testimony. We therefore affirm the

Eggleston Order. Mr. Eggleston is bound to his admission that he knew in 2009 that

55
FV-241 was made from carbon steel. We return to his testimony when we address

Sinclair’s failure-to-warn claim based on the Metallurgy Theory.

D. Claims Against ACE and the IVS Defendants

We turn to Sinclair’s claims against ACE and the IVS Defendants, which are the

fourth through seventh claims in the SAC. They are:

4. Breach of contract against ACE based on the Metallurgy Theory and OEM
Specifications Theory;

5. Negligence against ACE and the IVS Defendants based on the Metallurgy
Theory and OEM Specifications Theory;

6. Strict products liability against ACE and the IVS Defendants based on the
Metallurgy Theory and OEM Specifications Theory; and

7. Failure to warn against ACE and the IVS Defendants based on the Metallurgy
Theory, and failure to warn that FirstVue could not verify that a valve was
made from the correct metallurgy.

As we later explain, Sinclair conceded that if its claims under the Metallurgy

Theory fail, its claims under the OEM Specifications Theory also fail. We thus address

the claims based on the Metallurgy Theory and FirstVue’s limitations before turning to

the OEM Specifications Theory.

Claim 4 - Sinclair’s Breach-of-Contract Claim Against ACE Based on the
Metallurgy Theory

Sinclair’s fourth claim alleged in part that ACE breached the ACE Contract

because FV-241 was made from the incorrect metal. The district court granted summary

judgment to ACE because Sinclair did not identify a provision of the ACE Contract that

was breached based on ACE’s making FV-241 from carbon steel instead of stainless

steel. We affirm.

56
 The district court determined the ACE Contract consisted of three documents,

App. at 18,309-11: (1) ACE’s proposal to Sinclair’s Dick Edwards for ACE to inspect 68

valves and then repair or replace them as necessary, id. at 9528-31; (2) ACE’s purchase

order for ACE to inspect and repair 59 valves, id. at 9646; and (3) ACE’s quote to

Sinclair for FV-241, id. at 3340-42. The court also concluded the ACE Contract was

unambiguous and thus should be interpreted without resort to extrinsic evidence. See id.

at 18,594-95.

On appeal, no party disputes that the ACE Contract consists of the aforementioned

three documents and is unambiguous. We therefore focus on these three documents

without resort to extrinsic evidence. Sutherland, 273 P.3d at 1095 (no extrinsic evidence

when interpreting unambiguous contracts) (citing Union Pac. Res. Co., 882 P.2d at

219-20).

No provision in the ACE Contract created a duty for ACE to determine whether

FV-241’s metallurgy was chemically appropriate for service in a hydrogen-rich

environment and resistant to HTHA, and thus whether FV-241 was made from the right

metal. ACE therefore did not breach the ACE Contract by providing a carbon steel valve

to Sinclair.

Sinclair’s arguments to the contrary are unpersuasive. Aplt. Br. at 62-65. First, it

contends that ACE’s proposal stated that FV-241 and other remanufactured valves would

“be run through [Fisher FirstVue] to guarantee performance in the application specified.”

Id. at 63. Sinclair argues this implies that ACE and the IVS Defendants would check

FV-241’s resistance to HTHA. In its brief, Sinclair inserted the bracketed phrase

57
“[Fisher FirstVue].” In fact, the proposal reads, “All new or Encore valves will be run

through Fisher’s sizing program to guarantee performance in the application specified.”

App. at 9529 (emphasis added). This language does not contemplate that ACE would

assess FV-241’s metallurgy for resistance to HTHA.33

Second, Sinclair points to language in ACE’s proposal promising to “come to

[Sinclair] with our best recommendation as to whether it will be more cost effective for

[Sinclair] to go ahead and complete the repair . . . , rework or replace the trim . . . , or

replace the valve with a newly remanufactured Encore valve . . . .” Id. at 9528. Sinclair

argues the term “best recommendation” meant that ACE had to recommend a

replacement valve with the correct metallurgy. But the term “best recommendation” is

used in the context of whether repair, rework, or replacement of a valve is most

cost-effective.

Third, as it tried to do in district court, id. at 18,594-95, Sinclair asks us to

consider extrinsic evidence to interpret the ACE Contract despite conceding the contract

is unambiguous, Aplt. Br. at 63-64. But Wyoming law bars us from considering extrinsic

evidence when interpreting an unambiguous contract. Sutherland, 273 P.3d at 1095

(citing Union Pac. Res. Co., 882 P.2d at 219-20).

33
As the district court stated, “Sinclair’s argument would be like a smoke detector
manufacturer promising its smoke detectors will ‘guarantee performance’ in detecting
smoke, yet then having a consumer complain when the smoke detector does not detect a
home invader.” App. at 18,596.

58
 We agree with the district court that Sinclair failed to identify a contractual

provision that ACE breached by providing a carbon steel valve. We thus affirm the

district court’s grant of summary judgment for ACE on Sinclair’s fourth claim for breach

of contract based on the Metallurgy Theory. 34

Claims 5 and 6 - Sinclair’s Negligence and Strict Products Liability Claims
Against ACE and the IVS Defendants Based on the Metallurgy Theory

In the Omnibus Order, the district court granted summary judgment to ACE and

the IVS Defendants on Sinclair’s negligence and strict products liability claims that were

based on the Metallurgy Theory. It reasoned that these claims required FV-241 to be

defective, and that FV-241’s metallurgy did not make it defective. Instead, FV-241 was

the wrong product for its application. Applying Wyoming products liability law, we

affirm.

Additional legal background

In Wyoming, “[t]he requirement of showing a defect is one element common to

every products liability case, whether it is brought on a theory of negligence . . . [or] strict

34
Sinclair argues the district court erred in relying on this ground because ACE
did not present it in its summary judgment motion. Aplt. Br. at 64; see App. at 13,660-
82. But Sinclair’s opposition to summary judgment placed this question at issue—that is,
the duties created by the ACE Contract. App. at 17,641 (arguing that “[ACE] promised
to utilize its expertise and perform services to make certain that each replacement control
valve was properly selected in order to guarantee performance in the application
specified” and to perform “a comprehensive analysis of each valve”); see id. at 17,645
(characterizing the ACE Contract as requiring ACE to provide its “technical expertise”
for valve selection). Later, the parties extensively addressed at oral argument whether the
ACE Contract required ACE to make FV-241 from the correct metal. E.g., id. at 17,650,
19,092-93, 19,099-100, 19,101-03.

59
tort liability . . . .” McLaughlin v. Michelin Tire Corp., 778 P.2d 59, 64 (Wyo. 1989)

(citation omitted). “A defective product is a product which is not reasonably safe, or is

unreasonably dangerous to the user or customer.” Campbell ex rel. Campbell v. Studer,

Inc., 970 P.2d 389, 392 (Wyo. 1998) (quotations omitted). “The corollary of that

statement is if a product is safe for normal use, it is not defective.” Loredo v. Solvay Am.,

Inc., 212 P.3d 614, 633 (Wyo. 2009) (citing Campbell, 970 P.2d at 392).

The Wyoming Supreme Court has held that when a product is simply the “wrong”

one for its application, it is not defective. In McLaughlin v. Michelin Tire Corp., it

addressed whether Michelin tires installed on a mining company’s Caterpillar scraper

were defective or the wrong product for the application. 778 P.2d at 60-61. Cobre Tire

(“Cobre”), a seller of Michelin tires, provided tires and tire maintenance for the mining

company. Id. at 61-62. Cobre relied on Michelin’s advice to choose tires for the scraper.

Id. The tires caused the scraper to experience severe handling and control problems that

eventually caused a bodily injury. Id. The court held the tires were not defective, but

instead were the “wrong product” for the application. Id. at 64-65 (collecting decisions).

McLaughlin explained the proper claim against a seller or manufacturer that

furnishes a wrong product is one for breach of the implied warranty of fitness for a

particular purpose, not a products liability claim. If (1) a buyer relies on the “seller’s [or

manufacturer’s] skill and judgment” to select a product for a particular purpose, (2) the

seller or manufacturer knows about that reliance, and (3) “the product malfunctions when

it is being used in the manner in which it was intended by the [buyer],” then the buyer

may bring a claim for breach of the implied warranty of fitness for a particular purpose.

60
Id. at 66. In this context, the term “‘defect’ assumes an entirely different character than

. . . under [the] negligence or strict liability [products liability] context.” Id. “[A] defect

exists not in the product itself but in the conduct of . . . furnishing a product that simply

was the wrong one for the buyer’s particular use.” Id.

Analysis

Sinclair concedes it must show FV-241 was defective to prevail on its negligence

and strict liability claims against ACE and the IVS Defendants. Aplt. Bt. at 69. It has not

identified a defect, so we affirm.

As noted, the Wyoming Supreme Court’s decision in Loredo clarified that “if a

product is safe for normal use, it is not defective.” Loredo, 212 P.3d at 633 (citing

Campbell, 970 P.2d at 392). In other words, FV-241 was not defective if the evidence

showed it was safe for normal use.

ACE submitted evidence that FV-241 was safe for normal use. It points to

deposition testimony by Dr. Cornelissen, Sinclair’s metallurgy expert, suggesting that

FV-241’s metallurgy would have been acceptable if it had been placed into service

outside a hydrogen-rich or corrosive environment, Aplee. ACE Br. at 33-34 (citing App.

at 12,283), and to deposition testimony by Mr. Burns that about 90% of valves he

handled at ACE were made from carbon steel, id. at 34 (citing App. at 3243).

Meanwhile, Sinclair has made no effort to explain FV-241’s normal use, let alone show it

would be unsafe in normal use. The limited but uncontroverted evidence therefore shows

that FV-241’s metallurgy did not make it defective. Rather, it was the wrong product for

its application in the Unit.

61
 This reasoning is analogous to McLaughlin, in which the Wyoming Supreme

Court noted that “[a] product is designed for specific uses, and if it is properly made but

unsuitable for its intended use, its design is faulty.” 778 P.2d at 77. Here, Sinclair has

not shown that ACE or the IVS Defendants designed FV-241 for specific use in a

corrosive environment. Rather, ACE and the IVS Defendants intended FV-241 to have a

certain mechanical strength to withstand certain temperature and pressure conditions

without regard to whether it would carry hydrogen. Because Sinclair submitted no

evidence that FV-241 would have failed outside of hydrogen service, the district court

correctly held that it was not defective.

Sinclair’s two key arguments to the contrary are not convincing. First, Sinclair

urges us to apply an alternate definition of product defect found in Section 2(b) of the

Restatement (Third) of Torts: Products Liability. But in 2009, the Wyoming Supreme

Court had an opportunity to adopt Section 2(b) because the state district court had applied

it, but chose not to do so. Loredo, 212 P.3d at 630-31. In 1998, the Wyoming Supreme

Court briefly discussed Section 2(b), but did not adopt it. Campbell, 970 P.2d at 392 n.1.

Because the Wyoming Supreme Court has declined to adopt Section 2(b) on two

occasions, we do not apply it here.

Second, Sinclair argues that under the ACE Contract, it hired ACE and the IVS

Defendants to make “best recommendations” and to “assist Sinclair with its special

purpose.” Aplt. Br. at 70-71 (quoting App. at 18,330). But as we discussed earlier,

Sinclair has not identified any provision of the ACE Contract that was breached by

making FV-241 from carbon steel, and Sinclair uses the “best recommendations”

62
language out of context. Even if Sinclair had identified a contractual duty, it would not

support finding a product defect. As McLaughlin explained, when a seller or

manufacturer breaches its duty to apply its skill or judgment to select the right product,

the breach gives rise to an implied warranty or breach-of-contract claim, not a product

defect claim. See 778 P.2d at 65-67 (holding that such advice is relevant to an implied-

warranty claim).

For these reasons, we agree with the district court that Sinclair has failed to show

FV-241’s carbon steel composition made it defective as opposed to the wrong product for

its application. Because Sinclair’s negligence and strict products liability claims depend

on showing that FV-241 was defective and it has not done so, we affirm.

Claim 7 - Sinclair’s Failure-to-Warn Claim Against ACE and the IVS
Defendants

Sinclair’s failure-to-warn claim against ACE and the IVS Defendants rested on

their alleged breach of a duty to (a) warn that FV-241 was made from carbon steel and

was vulnerable to HTHA (the Metallurgy Theory), and (b) warn that FirstVue could not

verify the compatibility of a valve’s metallurgy with chemical conditions. The district

court rejected both claims in the Omnibus Order.

As for the Metallurgy Theory claim, we affirm because Sinclair knew before 2013

that FV-241 was made from carbon steel. No reasonable jury could find otherwise. As

for the FirstVue claim, we affirm because Sinclair forfeited certain arguments in district

court and waived them here by not arguing plain error.

63
 Sinclair knew before 2013 that FV-241 was made from carbon steel

Sinclair knew before 2013 that FV-241 was made from carbon steel. This

eliminated any duty ACE and the IVS Defendants may have had to warn Sinclair that

FV-241 was made from carbon steel and thus vulnerable to HTHA. We thus affirm the

district court’s dismissal of Sinclair’s failure-to-warn claim based on the Metallurgy

Theory.

Additional legal background

Wyoming law recognizes that “if [a] product itself is not defective but may be

unreasonably dangerous if it is used improperly, a plaintiff may show a ‘defect’ by

establishing that the manufacturer failed to warn about dangers associated with the

product.” Rohde v. Smiths Med., 165 P.3d 433, 441 (Wyo. 2007). Such a claim requires

“determining whether a warning is necessary and/or whether the warnings provided were

adequate.” Id. at 441. The plaintiff must also show that the product caused its injury and

that a warning would have changed its behavior and prevented the injury. See Abraham

v. Great W. Energy, LLC, 101 P.3d 446, 456 (Wyo. 2004) (citing Tune v. Synergy Gas

Corp., 883 S.W. 2d 10, 14 (Mo. 1994)).

The duty to warn does not require a seller or manufacturer to warn a product user

“of dangers of which the user is aware or of obvious dangers.” Parker v. Heasler

Plumbing & Heating Co., 388 P.2d 516, 519 (Wyo. 1964); see Sherman v. Platte Cnty.,

642 P.2d 787, 789-90 (Wyo. 1982) (applying this principle more recently in the premises

liability context).

64
 Analysis

The district court found that Sinclair knew about the risks of HTHA at all relevant

times. 35 App. at 18,331. It thus concluded: “[I]f Sinclair knew that FV-241 was made

from carbon steel [before 2013], then ACE and IVS Defendants had no duty to warn

Sinclair that it was nonconforming.” Id. at 18,333. We agree. 36 We further agree the

evidence showed that Sinclair knew before 2013 that FV-241 was made from carbon

steel. 37

35
Numerous Sinclair employees knew about the risk of HTHA. See App. at 3107
(Sinclair’s admission that “some employees” knew before 2004 about HTHA). For
example, before the 2009 fire, Mr. Eggleston learned about HTHA by studying for an
industry certification. Id. at 6885-86. Other Sinclair inspectors also had industry
certifications. Id.; see id. at 3355 (testimony by John Bergeson, a Sinclair inspector,
stating he knew about HTHA). Paul Moote, Sinclair’s Manager of Capital Projects, and
Bill Walters, Sinclair’s chief engineer for the project to move and convert the Unit, also
knew about HTHA. Id. at 2958, 14,018. The specifications Fluor developed for the Unit
and provided to Sinclair required FV-241 to be made from stainless steel because of
HTHA.
36
In its reply brief, Sinclair characterizes this conclusion as “a mistaken turn” but
does not explain why. Aplt. Reply Br. at 42. “[W]e generally do not consider arguments
made for the first time on appeal in an appellant's reply brief and deem those arguments
waived.” United States v. Leffler, 942 F.3d 1192, 1197 (10th Cir. 2019). We also deem
these issues waived due to inadequate briefing. See Burke, 935 F.3d at 1014 (“[A]n
appellant may waive an issue by inadequately briefing it.”).
37
In its opening brief, Sinclair argues the district court should not have relied on
Mr. Eggleston’s first deposition testimony to conclude Sinclair knew before 2013 that
FV-241 was made from carbon steel. Aplt. Br. at 73-78. But Sinclair does not contest
that its failure-to-warn claim fails if it had such knowledge. See id. at 78 (even appearing
to acknowledge that Sinclair’s knowledge “that FV-241 was manufactured from carbon
steel before the Fire” “could have obviated the need for a warning”).

65
 First, Sinclair received specification sheets from ACE in February and April 2006

stating that FV-241’s “Material” was “WCB Carbon STL Cast,” or cast carbon steel. Id.

at 3341 (specification sheet sent in February); id. at 3394 (specification sheet sent in

April); id. at 3103 (Sinclair’s admission that it received these documents). Before the

district court, Sinclair argued that Mr. Edwards, “[its] employee who received that

specification sheet[,] was only qualified to assess it for specifications, not for

metallurgy.” Id. at 18,333 (citing Sinclair’s argument, App. at 9277). But as the district

court observed in the Omnibus Reconsideration Order, id. at 18,602, Sinclair cited no

evidence showing Mr. Edwards was unqualified, id. at 9277-78 & n.84 (citing App.

at 10,211-15). And the specification sheets plainly said FV-241 was made of carbon

steel.

Second, when Sinclair received FV-241 from IVS in 2006, the valve’s actuator

tag, flanges, and valve body carried markings indicating it was made from carbon steel.

Id. at 2827 (“Incident Investigation” document, indicating that FV-241’s flange was

labeled as carbon steel); id. at 17,666 (Sinclair’s admission). Before the district court,

Sinclair argued its employees who received FV-241 from IVS and turned it over to A&B

for installation would not have known what the markings meant. Id. at 18,333 (citing

Sinclair’s argument, App. at 17,666). But as the district court observed in the Omnibus

Reconsideration Order, id. at 18,602, Sinclair cited no evidence to support this argument,

id. at 17,666.

Third, Mr. Eggleston testified he knew in 2009 that FV-241 was made from

carbon steel. His recollection of other details about FV-241 reinforced this admission.

66
He remembered that Sinclair had identified FV-241 as a “long lead-time item[]” for

replacement purposes. Id. at 6643, 6651-53. He recalled that FV-241 had “a similar

construction” to its sister valve, FV-240. Id. at 6645. His recollection of FV-240 and

FV-241 was noteworthy because the Unit had several dozen valves. Id. at 9513-14

(process information spreadsheet indicating the Unit had about 80 valves); id. at 9528

(ACE’s proposal to Sinclair, contemplating work relating to 68 valves). He testified that

if he saw the markings on FV-241, he would have understood the markings as indicating

it was made from carbon steel. Id. at 6647. 38

Sinclair’s attempts to downplay this testimony fail. It contends that even though

Mr. Eggleston testified his Brinell testing in 2009 would have left marks on four areas of

FV-241, Dr. Cornelissen, Sinclair’s metallurgy expert, found only one “definitive”

Brinell testing mark when he examined FV-241 after the 2013 explosion and fire. Id. at

6646, 6667 (Eggleston testimony); id. at 9232, 9234 (Cornelissen testimony). But Dr.

Cornelissen’s testimony addressed whether Mr. Eggleston correctly performed Brinell

testing. 39 It did not directly address whether Mr. Eggleston knew FV-241 was made from

carbon steel.

38
In its reply brief, Sinclair argues that ACE and the IVS Defendants must show
Sinclair knew FV-241 was carbon steel in the year 2006, not just that Sinclair knew
sometime before the 2013 fire and explosion. Aplt. Reply Br. at 41. Once again, we
deem this argument waived because it was made for the first time on appeal in Sinclair’s
reply brief. Leffler, 942 F.3d at 1197. And in any case, we have described the evidence
showing Sinclair knew in 2006.
39
The evidence shows that Mr. Eggleston performed Brinell testing on FV-241.
He testified that at a meeting shortly after the 2009 fire, he discussed the need to perform
Brinell testing on FV-241 with other staff. App. at 6648, 6650-51. He testified that he
67
 Further, Sinclair argues it can rely on Mr. Eggleston’s second deposition, wherein

he explained why he tried to retract his earlier testimony. Aplt. Br. at 77. But as the

district court correctly held in the Omnibus Reconsideration Order, Mr. Eggleston’s

second deposition testimony is inadmissible for the same reason his Rule 30(e) changes

are inadmissible. App. at 18,601-02.

Finally, Sinclair contends, without pointing to evidence, that Mr. Eggleston’s

testimony cannot be imputed to Sinclair. Aplt. Br. at 78. But Mr. Eggleston was

Sinclair’s inspection supervisor and responsible for inspecting the Unit after the 2009

fire. “[A] corporation is chargeable with the knowledge of its agents and employees

acting within the scope of their authority.” United States ex rel. Polukoff v. St. Mark’s

Hosp., 895 F.3d 730, 745 n.9 (10th Cir. 2018) (quoting W. Diversified Servs., Inc. v.

Hyundai Motor Am., Inc., 427 F.3d 1269, 1276 (10th Cir. 2005)); Grayson v. Williams,

256 F.2d 61, 66 (10th Cir. 1958) (“[A]dmissions made by an agent while acting in the

scope of his employment and concerning the subject matter of his employment are

binding on the principal.”); see Fed. R. Evid. 801 advisory committee’s note to 1972

proposed rules (citing Grayson, 256 F.2d 61); Am. Nat’l Bank of Powell v. Foodbasket,

performed the test “in the field where [it] normally resides in operation.” Id. at 6643.
After the 2013 fire and explosion, Mr. Eggleston told others about having performed
Brinell testing on FV-241 in 2009. Id. at 6659-60.
Also, the IVS Defendants’ expert witness, Dr. Michael E. Stevenson, observed at
least one definitive Brinell testing indentation and several potential ones on FV-241. Id.
at 6583-84, 6587-93. He also noted that Brinell testing indentations can be damaged by
age, mechanical damage, or thermal damage. Id. at 6583.
68
497 P.2d 546, 547-48 (Wyo. 1972) (agent’s knowledge generally may be imputed to

principal).

* * * *

The summary judgment record shows Sinclair knew before 2013 that FV-241 was

made from carbon steel. No reasonable jury could conclude otherwise. This eliminated

any duty for ACE and the IVS Defendants to warn that FV-241 was made from carbon

steel and thus vulnerable to HTHA. We therefore affirm the district court’s grant of

summary judgment on Sinclair’s failure-to-warn claim based on the Metallurgy Theory. 40

Failure-to-warn claim based on FirstVue’s limitations

In the Omnibus Order, the district court held that because Sinclair was not a user

or consumer of FirstVue, it lacked standing to assert failure-to-warn claims about

FirstVue. App. at 18,335-36. On appeal, Sinclair argues the court erred because ACE

and the IVS Defendants owed a duty of care to all persons within the zone of risk. Aplt.

40
Sinclair argues liability should be imposed under Comment e to Section 5 of the
Restatement (Third) of Torts: Products Liability. See Aplt. Reply Br. at 40 (mistakenly
citing Comment b but making an argument based on Comment e). Comment e states:
“When the component seller is substantially involved in the integration of the component
into the design of the integrated product, the component seller is subject to liability when
the integration results in a defective product and the defect causes harm to the plaintiff.”
Apart from the fact that Wyoming courts have not adopted this section of the
Restatement, Comment e does not help Sinclair because it integrated the component
(FV-241) into the product (the Unit), making the product defective. See App. at 18,331
(district court’s factual finding that Sinclair does not contest on appeal). All the cases
cited in the Reporters’ Note to Comment e contemplate failure-to-warn claims brought
against a component seller by a plaintiff that was not involved in integrating the
component.

69
Br. at 79-80. But Sinclair forfeited this argument by failing to raise it before the district

court, and waived it here by failing to argue plain error on appeal.

Legal standards

Under Wyoming law, one owes a duty of care to those in the zone of foreseeable

risk. Glenn v. Union Pac. R. Co., 262 P.3d 177, 193-94 (Wyo. 2011) (collecting cases).

But a manufacturer is strictly liable only to the consumers and users of its products. Ogle

v. Caterpillar Tractor Co., 716 P.2d 334, 341-42 (Wyo. 1986) (expressly adopting

Section 402A of the Restatement (Second) of Torts as Wyoming law). In general, the

class of plaintiffs that may maintain a negligence claim is larger than the class that may

sue for strict liability.

Analysis

Sinclair argues the district court erred by holding that its failure-to-warn claim

failed because it was not a consumer or user of FirstVue. It contends that because its

failure-to-warn claim is a negligence claim, ACE and the IVS Defendants owed a duty of

care to all those in the zone of foreseeable risk associated with FirstVue. But Sinclair

forfeited this argument by failing to make it in district court.

We trace Sinclair’s forfeiture to its imprecise pleading and briefing on summary

judgment. In the SAC, it vaguely labeled its seventh claim for relief as “failure to warn.”

App. at 1737. It did not explain whether this claim was for negligence or strict products

liability. In their motion for summary judgment, the IVS Defendants understood that

Sinclair’s failure-to-warn claim was for strict products liability instead of negligence.

They cited Section 402A of the Restatement (Second) of Torts, which concerns strict

70
products liability claims, and argued that Sinclair did not have standing to bring its

failure-to-warn claim because Sinclair was neither a user nor a consumer of FirstVue. Id.

at 2189-90. In its opposition, Sinclair did not clarify whether its FirstVue failure-to-warn

claim was based on negligence, nor explain why it had standing to bring a failure-to-warn

claim as a non-user and non-consumer of FirstVue under either a negligence or strict

liability theory. Id. at 9260, 9293-95 (opposition). 41 The district court applied Section

402A, noted that Sinclair had failed to respond to the IVS Defendants’ argument, and

held that Sinclair lacked standing to bring a failure-to-warn claim about FirstVue’s

limitations. Id. at 18,335-36 (portion of Omnibus Order noting Sinclair’s failure to

respond).

Sinclair now insists that its failure-to-warn claim regarding FirstVue is a

negligence claim and argues it has standing despite being a non-user and non-customer of

FirstVue. Aplt. Br. at 79-80. But Sinclair forfeited that argument in district court and has

waived it here by failing to argue that the district court plainly erred by failing to construe

its claim as a negligence claim. See Richison v. Ernest Grp., Inc., 634 F.3d 1123, 1127-

30 (10th Cir. 2011).

We therefore affirm the district court’s grant of summary judgment to ACE and

the IVS Defendants on Sinclair’s failure-to-warn claim based on FirstVue’s limitations.

* * * *

41
In its opposition to a later summary judgment motion by ACE, Sinclair labeled
its seventh claim for failure to warn as a negligence claim. App. at 17,649. But Sinclair
never explained why it had standing as a non-user and non-consumer of FirstVue.

71
 We affirm the district court’s grant of summary judgment to ACE and the IVS

Defendants on Sinclair’s failure-to-warn claims based on the Metallurgy Theory and

FirstVue’s limitations.

Sinclair’s Remaining Claims Based on the OEM Specifications Theory

Sinclair’s remaining claims are based on the OEM Specifications Theory. 42 In the

IVS Second MSJ Order, the district court accepted Sinclair’s concession that FV-241’s

failure to meet Fisher’s OEM specifications for wall thickness would not alone have

caused FV-241’s failure, App. at 18,848, because “the wall thickness issue only affected

the timing of the failure,” id. at 18,676 (Sinclair’s concession). In other words, Sinclair

conceded that if its claims based on the Metallurgy Theory fail, its claims based on the

OEM Specifications Theory also fail.

Based on this concession, the district court granted summary judgment to ACE

and the IVS Defendants on Sinclair’s remaining claims based on the OEM Specifications

Theory. Id. at 18,848-51. On appeal, Sinclair provides no reason why it is not bound by

its concession. Because we agree with the district court’s conclusion that Sinclair’s

claims based on the Metallurgy Theory are not viable, we affirm the district court’s grant

of summary judgment on Sinclair’s claims based on the OEM Specifications Theory.

42
The remaining claims are: (1) a breach-of-contract claim against ACE; (2) a
negligence claim against the IVS Defendants; and (3) a strict products liability claim
against the IVS Defendants. App. at 18,290-91; see id. at 18,598 (“Against the party not
bound, Sinclair can pursue its tort theories.”).

72
 III. CONCLUSION

Although our analysis diverges from the district court’s in some respects, we

affirm the orders dismissing or granting summary judgment on all of Sinclair’s claims

and granting summary judgment in favor of the CB&I Defendants’ indemnity

counterclaim.

73