Cummins v. Smith & Furbush Machine Co.

Opinion by

Oklady, P. J.,

John Cummins, the plaintiff, while engaged in work at a vise, received injuries which it is alleged resulted in his death. His testimony was taken in a deposition, and his description of the tool with which he was working and the manner in which he received his injuries were confirmed by other employees. The vise was an ordinary appliance, having no unusual or complicated parts, the face of the jaws being threaded or roughened so as to firmly clutch the object held, and the grip on the object was controlled by the operator by means of a handle attached to a screw. The only power applied was the operator’s own strength.

At the time the accident occurred the threads or roughened surface on the face of the jaws had become worn through use, and when the plaintiff inserted a cap between the jaws and tightened them by turning the lever the cap slipped and turned, so as to release the lever, which flew around and the end of it struck him in the stomach. It was shown that the employer and the employee knew of the worn surface of the jaws of the vise. The plaintiff was an experienced operator as a vise hand, and for a number of years had Used this vise without objection. While he had made complaints of its worn condition, he continued to use it for several weeks after the accident without further accident or complaint.

His right to recover depends upon the undisputed facts of the case. While he was familiar with the tool and knew of the worn condition of the jaws, he also knew that by care an object could be safely held between the jaws, and this is confirmed by his continued use of the tool after this accident. The slipping of an object between the jaws would be due entirely to an incorrect adjustment of the object to the line of the jaws, *237and this was entirely within the control of the operator. His years of experience must necessarily have taught him the hazard of an improper adjustment. There was no imminent danger or no special risk if the object was properly placed, so as to be safely gripped; and his continu-' ing to use it, as an experienced operator, can have no other meaning than that he believed it to be a reasonably safe tool. His judgment in regard to its safety was as trustworthy a guide as that of his employer, and what happened should have been reasonably anticipated under the circumstances. No part of the tool was misplaced or broken, and the danger was one he knew of and faced every time h.e closed the jaws of the vise by an inaccurate adjustment, so that he took the chance and assumed the risk of being injured when he used the tool without due care.

From the undisputed testimony of the case, it could not be said that the tool was defective or dangerous if properly operated, and all witnesses agreed that the worn ridges on the jaws of the vise would be expected in the continuing use of such a tool. There is lacking in this case any direction on the part of the employer to the employee to use an admittedly dangerous tool or appliance, and there was the added and well-known danger of a worn vise-face, which was an apparent fact requiring additional precaution by the operator.

After a careful review of all the evidence in the case, we are satisfied that the judgment non obstante veredicto was properly entered, and it is now affirmed.