The merchandise involved in these protests is cellophane sheets assessed for duty at 40 cents per pound under the provisions of paragraph 31 (b) (1), .Tariff Act of 1930. It is claimed properly dutiable at 45 per centum ad valorem under the provisions of paragraph 31 (c) of the same act.
Paragraph 31 (b) (1), under which these sheets were assessed for duty, provides, so far as is pertinent to this issue, for “All compounds of cellulose * * *”:
(1) In blocks, sheets, rods, tubes, powder, flakes, briquets, or other forms, * * * not made into finished or partly finished articles * * *.
*41Paragraph 31 (c) under which importer claims the merchandise is properly dutiable provides for — •
Sheets, bands, and strips (whether known as cellophane or by any other name whatsoever), exceeding one inch in width but not exceeding three one-thousandths of one inch in thickness, made by any artificial process from cellulose, * * * by solidification into sheets, bands, or strips, * * *.
No oral testimony was introduced, the case being submitted on a stipulation between counsel through which it was agreed that the merchandise as imported consisted of cellophane sheets over 1 inch in width and not over three one-thousandths, of 1 inch in thickness, made by an artificial process from cellulose hydrate by solidification into sheets which were thereafter cut into the widths represented by the imported sheets by knives set at predetermined positions on the rewinding machine.
Briefly stated, the position of the plaintiff is that the imported sheets cut from the larger sheets are nonetheless cellophane in sheets specifically provided for in paragraph 31 (c). The position of the Government (defendant) is that while the wider sheets, from which the imported sheets were cut, were made by a solidification process, the narrower sheets, as imported, are not dutiable under paragraph 31 (c) as cellophane sheets made by solidification into sheets.
The provision for cellophane in sheets, bands, and strips first appeared in the Tariff Act of 1930 as paragraph 31 (c). The predecessor paragraph in the 1922 act (paragraph 31) provided, insofar as is pertinent to the present issue, for “Compounds of pyroxylin * * * or of cellulose, by whatever name known * * * in •* * * sheets * * * or other forms, and not made into finished or partly finished articles, 40 cents per pound; made into finished or partly finished articles, of which any of the foregoing is the component material of chief value, 60 per centum ad valorem * *
In the Tariff Act of 1930, paragraph 31 was broken up into sub-paragraphs 31 (a) (1) and (2); 31 (b) (1) and (2); and 31 (c). Paragraph 31 (a) (1) and (2) provides for cellulose acetate and combinations or mixtures thereof. Paragraph 31 (b) (1) covers compounds of cellulose, not made into finished or partly finished articles, at 40 cents per pound. Paragraph 31 (b) (2) covers the same merchandise, if made into finished or partly finished articles, on which the rate is 50 per centum ad valorem (as amended by the trade agreement with the United Kingdom, T. D. 49753), whereas paragraph 31 (c), as hereinabove referred to, covers cellophane in sheets, bands, and strips, at 45 per centum ad valorem.
By changing the language of paragraph 31 of the Tariff Act of 1922 and making specific provision under paragraph 31 (c) of the Tariff Act of 1930 for cellophane in sheets, bands, and strips, the Congress expressed a clear intent to provide the stated ad valorem rate of duty *42■on. cellophane and to exclude cellophane sheets from the provisions of paragraph 31 (b) (1) for compounds of- cellulose in sheets at the pound rate of duty. It will be presumed that Congress did not use this language found in paragraph 31 (c) without meaning.
It is apparent from the agreement reached by counsel that if this merchandise were imported in the original sheets which were made the .full width of the machine on which they were produced by the manufacturing process known as solidification, there would be no question but that they were properly dutiable under the provisions of paragraph 31 (c). It is the defendant’s position in support of the collector’s classification that because these wide sheets were slit into narrow widths as they came off the machine, this manipulation took the material out of the eo nomine provision for cellophane sheets in paragraph 31 (c) and made it subject to the provisions of paragraph .31 (b) (1), as assessed by the collector.
We do not agree with this position taken by the defendant. In the condition in which imported, the merchandise before us consists •of “Sheets * * * (* * * known as cellophane * * *), exceeding one inch in width but not exceeding three one-thousandths ■of one inch in thickness * * as provided in paragraph 31 (c). While the Congress concludes this paragraph by using the words “by solidification into sheets, bands, or strips,” we do not believe that -Congress meant to include only sheets, bands, and strips which in •widths imported were solidified in the first instance on the machine into such widths. Such a construction would be hypertechnical and would result in a commercial absurdity. It would mean that a wide •sheet of cellophane would pay one rate of duty whereas that same sheet, if trimmed or cut into any other widths, would take a different rate •of duty. In other words, the same product would, because of this flitting process, have its condition changed for tariff purposes. This -we do not believe was intended by Congress in preparing the present paragraph 31 of the Tariff Act of 1930. Where a literal or hyper-technical interpretation of the statute would produce a result contrary to the apparent legislative intent, then the strict letter of the •statute must yield to the intent of Congress. Procter & Gamble Manufacturing Co. v. United States, 19 C. C. P. A. 415, T. D. 45578.
There was before Congress at the date of the passage of the 1930 .act, a decision of this court in Du Pont Cellophane Co. (Inc.) v. United States, 55 Treas. Dec. 327, T. D. 43232. At pages 328 and 329 of that decision, there appears a stipulation describing the method of .manufacturing cellophane, which we may assume was similar to the merchandise here before us. The merchandise was described as follows, page 329:
(j) The resulting -product. — After passing through the squeezing and heated ¡rollers the film comes off the end of the machine in a roll about 36 inches in width *43and approximately 5,000 feet long * * *. This continuous film is later cut into smaller sheets or other forms according to the trade requirements. [Italics ■supplied.]
It seems clear that by paragraph 31 (c), Congress unquestionably ■contemplated just such merchandise as is here before us. There is no claim that these sheets, as imported, are articles as was the case in Birn & Wachenheim v. Du Pont Cellophane Co. (Inc.), 17 C. C. P. A. 122, T. D. 43454, where the Court of Customs and Patent Appeals, in considering an appeal from a decision of this court, stated (p. 127):
* * * True enough., sheets of cellulose are articles but they are specially mentioned as sheets and it seems clear that such sheets, unless made into articles, ■can not be classifiable under the second bracket of the paragraph.
The court was there referring to that portion of paragraph 31 of the Tariff Act of 1922 that provided for a different rate of duty where the compounds of pyroxylin were made into “finished or partly finished articles.”
We find, therefore, that the imported cellophane sheets cut from wider sheets which were produced by solidification are properly dutiable, as claimed, under paragraph 31 (c) of the Tariff Act of 1930. The classification of the collector is therefore overruled and the claim of the plaintiff that the imported merchandise is dutiable at 45 per ■centum ad valorem under paragraph 31 (c) of the Tariff Act of 1930, as “Sheets, bands, and strips (whether known as cellophane or by any other name whatsoever), exceeding one inch in width but not exceeding three one-thousandths of one inch in thickness, * * * by solidification into sheets, bands, or strips,” is sustained.
Judgment will issue accordingly.