DISSENTING OPINION
Rao, Judge:I regret that I am unable to concur in the conclusions reached by my associates in this case, based upon my analysis of the record and in view of the considerations hereinbelow expressed.
Plaintiff is the importer of a certain device known as a Skardal stock preparator and various parts thereof, which are used in the process of making paper pulp. It herein protests the action of the collector of customs at the port of entry in classifying said merchandise as stock treating parts for pulp and paper machinery and assessing duty thereon at the respective ad valorem rates prevailing on the dates of entry of the several shipments, to wit, 20 per centum, 19 per centum, 18 per centum, or 17 per centum, as provided in paragraph 356 of the Tariff Act of 1930, or as modified by the Sixth Protocol of Supplementary Concessions to the General Agreement on Tariffs and Trade, 91 Treas. Dec. 150, T.D. 54108.
It is the claim of the plaintiff that, with certain exceptions hereinafter more particularly specified, said merchandise is properly provided for in paragraph 372 of said act, as modified by the Torquay Protocol to the General Agreement on Tariffs and Trade, 86 Treas. Dec. 121, T.D. 52739, or by said sixth protocol, as machines for making paper pulp, and parts thereof, which are dutiable, depending upon the date of entry, at the rate of 10 per centum ad valorem, or 9y2 per centum ad valorem, or 9 per centum ad valorem, or 8y2 per centum ad valorem.
These several provisions, insofar as here pertinent, read as follows:
Paragraph 356 of the Tariff Act of 1930:
Planing-maeMne knives, tannery and leather knives, tobacco knives, paper and pulp mill knives, roll bars, bed plates, and all other stock-treating parts for pulp and paper machinery, shear blades, circular cloth cutters, circular cork cutters, circular cigarette cutters, meat-shearing cutters, and all other cutting knives and blades used in power or hand machines, 20 per centum ad valorem.
*74Paragraph 356, as modified by T.D. 54108, supra:
Boll bars, bed plates, and all other stock-treating parts for pulp and paper machinery (not including
paper or pulp mill knives)_10% ad val. 18% ad val. 17% ad val.
Paragraph 372, as modified by T.D. 52739, supra :
Machines, finished or unfinished, not specially provided for:
*******
Machines for making paper pulp or paper-10% ad val.
* * ***** * Parts, not specially provided for, wholly or in chief value of metal or porcelain, of any article provided for in any item 372 in this Part:
*******
Other-The rate for the article of which they are parts.
Paragraph 372, as modified by T.D. 54108, supra:
Machines, finished or unfinished, not specially provided for:
*******
* * *; machines for making
paper or paper pulp_9%% ad val. 9% ad val. 8%% ad val.
******* Parts, not specially provided for, wholly or in chief value of metal or porcelain, of any article provided for in any item 372 in this Part.
The rate for the article of which they are parts.
The parties have stipulated that the Skardal stock preparator, “is an integrated mechanical complex lacking only motive power from an outside source in order to perform the function for which it is designed, namely, the refining of paper slurry from virgin stock, waste paper, etc., by means of a grinding or grating action.”
The stipulation also provides, in part, that—
Generally speaking, the machine consists of a series of three perforated cylinders against each of which the stock is ground or beaten by three perforated shoes. The other parts are the base, housing, inlet and exhaust ports, shaft, spiders to which the shoes are connected, sheave for bolt for transmission of power from an outside source, and miscellaneous smaller parts.
It further appears from the stipulation, the testimony of two well-qualified witnesses called by plaintiff, and by diagrammatic representations of the pulp making process, known as flow sheets, that paper stock, which has not been sufficiently broken down in the initial beating and digesting steps and, hence, is too coarse to pass through a screen separator, is pumped through pipes into the Skardal stock preparator for further refinement.
The machine functions as follows: The stock enters through the inlet port into the first stage where it is beaten and ground between the rotating shoes *75and inner surface of the stationary cylinder until it has been sufficiently refined to pass through the perforations in the cylinder. * * * It then flows into the second stage where the same process is repeated, the slurry becoming further beaten and ground and thus refined. It then passes through the perforations in the second cylinder into the third stage and after further beating and grinding leaves the machine through the perforations in the third cylinder and then the exhaust port. The function performed by the machine is the refinement of the stock fed to the machine, the process involved being that of making the fibres of the paper slurry shorter and finer by beating and grinding.
When the stock leaves the Skardal stock preparator, it is returned to the pulp making system for screening and thickening until it reaches the proper consistency for paper making. The Skardal stock preparator is but one of many pieces of machinery employed in the process of making paper pulp, there being no single device in any papermill capable of completely manufacturing paper pulp. It is not physically connected with other machines, for the performance of its function, except for the piping through which the slurry flows, and the motive power necessary for its operation. It is a separate and distinct unit for mechanically reducing the size of the individual pieces of stock in the slurry.
Other refiners may be substituted for the Skardal stock preparator, or none at all need be used, if the slurry is fine enough for the desired end result. It is also possible to supplant any one of the machines in the pulpmill with another of like character. However, a refiner, such as or similar to the Skardal stock preparator, is ordinarily considered to be essential to the proper and efficient production of paper pulp; and is a part of the mill equipment.
Counsel for the plaintiff concedes that the shoes, invoiced as Slapas, and the cylinders, invoiced as Malrings, where separately imported, are, in fact, stock treating parts for pulp and paper machinery, for they are the elements of the preparator between which the stock is beaten and ground. In addition, with respect to entry 22483, no objection is raised against the classification of the spiders (Rotornavs) as stock treating parts, for the reason that they were imported with shoes and cylinders, invoiced as one set of stators and rotors, and “the main value of the set lies in the shoes and cylinders, rather than in the spiders.”
As to all other items, it is the contention of the importer that they are properly provided for in paragraph 372, as modified, supra, as machines for making paper pulp or parts thereof. In general, it is the position of the plaintiff that while, in the very broadest sense, the Skardal stock preparator may be referred to as a part of the machinery of a pulp making establishment, it is, in itself, a complete, independently functioning mechanism, which does not appropriately belong within a “parts” designation. It is further contended that the Skardal preparator is not ejusdem generis with any other items speci-*76fled by name in said paragraph 356 and, hence, is not, within the intendment of the provision, a stock treating part for pnlp and paper machinery.
Counsel for the Government urges that a Skardal stock preparator is only a part of the machinery for making paper and pulp, not a single, integrated mechanical device, which, by itself, produces paper pulp. As such, and since it treats the stock by cutting, grinding, beating, or a similar operation, counsel argues it is literally a stock treating part for pulp and paper machinery.
Before the specific issue created by these conflicting contentions can be resolved, certain preliminary observations relating to the scope and effect of the provision for machines for making paper pulp in paragraph 372 of the Tariff Act of 1930, as modified, swpra, need to be made.
It appears that an eo nomine designation for machines for making paper pulp and paper was carved out of the provision for machines, not specially provided for, by trade agreement negotiation. The first such provision was written into the trade agreement with Sweden, 68 Treas. Dec. 19, T.D. 47785, in 1935. An explanation of the purport of the new language is to be found in the “Digest of Trade Data with Bespect to Products on which Concessions were Granted by the United States in the United States-Swedish Trade Agreement,” a document having acknowledged value in interpreting changes in phraseology effected by said agreement. Border Brokerage Co. v. United States, 44 Cust. Ct. 124, C.D. 2165, affirmed, 48 C.C.P.A. (Customs) 113, C.A.D. 774. The following statement relative to the new provision appears on page 162:
The above classification is intended to include machines used (1) in the preparation of wood, rags, and other fibrous material for conversion into pulp, (2) in conversion of the prepared material into pulp, (3) in refining or (packaging such pulp preliminary to its use in making paper, and (4) in the manufacture of such pulp into paper. The classification does not include sawmill machines such as slashers, log conveyors, etc., and other machines which though used in pulp mills have a more general use in the lumber and wood-using industries.
Machines used in pulp mills include barkers, chippers, grinders, chip crushers, and screens for preparing the wood, or cutters, dusters, etc., for preparing rags, screens, refiners, presses, dryers, beaters, etc. The three types of machines commonly used for the conversion of pulp into paper are the Fourdrinier, cylinder, and Yankee.
A similar analysis of tbis provision is also to be found in tbe 1948 Summaries of Tariff Information, volume 3, part 4, page 154.
Tbe foregoing statement lends support to tbe proof adduced by plaintiff, if indeed it be beyond tbe purview of tbis court to judicially notice tbe fact, that tbe manufacture of paper pulp is tbe combined contribution of a large number and considerable variety of individual machines. Some prepare tbe initial materials, others process and *77treat stock, still others convert pulp into finished paper. Consequently, when the provision for machines for making paper and pulp was written into the trade agreement, it must have been its purpose to embrace more than just a single machine for making paper pulp and a single machine for making paper. If then, thé intent of the negotiators of this provision was to include several different kinds of machines which, together, produce paper pulp, the major premise of the defendant’s position is seemingly undermined. Chippers, grinders, refiners, and beaters are stock treating elements which are parts of the pulp making process. Yet, they appear to have been the very machines for making paper and pulp accorded separate tariff status by the new language and, hence, are not the stock treating parts provided for in paragraph 356.
On the other hand, if machines which treat stock in the course of the preparation of paper pulp were, prior to the adoption of the Swedish Trade Agreement, more specifically provided for in paragraph 356, as stock treating parts for pulp and paper machinery, it was beyond the province of the negotiators to make provision for them elsewhere. Abercrombie & Fitch Co. v. United States, 9 Cust. Ct. 336, C.D. 709, citing United States v. Canadian National Railways, 29 C.C.P.A. (Customs) 272, C.A.D. 202. See also, in this connection, Atalanta Trading Corp. v. United States, 42 C.C.P.A. (Customs) 90, C.A.D. 577.
It remains to be determined whether complete machines performing independent steps in the manufacture of paper pulp fall within the scope of the provision for stock treating parts for pulp and paper machinery. This question has been touched upon in certain prior decisions of this and our appellate court which have been brought to our attention in the excellent briefs submitted by adversary counsel.
In E. Dillingham (Inc.) v. United States, 58 Treas. Dec. 329, T.D. 44281, the merchandise in issue consisted of cast-iron grinders, each of which, when combined with an integral and essential part known as a pulp stone, was used to convert wood stock into woodpulp by a grinding process. In holding that the provision for “stock-treating parts for pulp and paper machinery” more specifically provided for the subject grinders than the provision for parts of machines, not specially provided for, the court observed that paragraph 356 of the Tariff Act of 1922, the same for all essential purposes as paragraph 356 of the 1930 act, was new legislation and that, before enacting it, Congress was supplied with the following information from the United States Tariff Commission in the 1921 Summary of Tariff Information, page 471:
* * * Paper and pulp-mill knives are made of a straight piece of steel and used on “roll” or “fly” bars of beater engines, and on cbippers and cutters. Slitter knives are of circular form and used in paper machines for slitting, or *78cutting the paper lengthwise. A roll bar is a metal cylinder about 4 or 6 feet in diameter with heavy knives parallel with the shaft fitted into its face. A bedplate is a series of steel plates standing' on edge and bolted together. The “stock,” or rough paper material, passes between the revolving “roll bar” and the stationary “bedplate” to be cut up. * * *
•This case is of interest in providing the background for the provision for “stock-treating parts for pulp and paper machinery” but not, in my opinion, decisive of the issue here, since the grinders under consideration were actually parts of a unit.
California Fruit Wrapping Mills (Inc.) v. United States, 59 Treas. Dec. 981, affirmed 19 C.C.P.A. (Customs) 381, T.D. 45513, involved certain imported Fourdrinier-wire screens, conceded to be indispensable parts of paper making machines, which serve as the conveyors of pulp from the stock receptacle to the rollers of the paper machines, and are the means through which much of the water in the pulp material drains off. Plaintiff therein, contending for classification of its merchandise within the provision for stock treating parts for paper machinery, urged that water drainage was a stock treating process within the meaning of the language of paragraph 356. A majority of the court held to the contrary, being of opinion that when stock reaches the receptacle or head box from which Fourdrinier screens are fed, it has been fully treated and finished as stock and, thereafter, enters a new stage for conversion into a product which is something other than stock and, hence, Fourdrinier screens are not stock treating parts. The court further remarked upon the fact that paragraph 356 provides for stock treating parts for not of pulp and paper machinery and observed that Fourdrinier-wire screens were not ejusdem generis with the knives and cutters specified in the provision, stating:
* * * The articles intended are clearly those which grind, cut, beat, or similarly function in the actual preparation and treating of the stock as such.
Tn affirming said decision, our appellate court had this to say:
We do not think that the legislative intent in the use of the words “stock-treating parts for pulp and paper machinery” is so apparent as to exclude consideration of the doctrine of ejusdem generis or other applicable rules of construction.
We agree with the lower court that the screens here involved are not ejusdem generis with the articles designated in said paragraph 356. The articles named in the paragraph are those which cut, grind, or beat material, or assist in performing those functions. It is established that the screens * * * neither perform nor assist in performing such functions.
*******
As heretofore indicated, we think that the words “stock-treating parts,” as used in said paragraph 356, refer to the treatment of paper and pulp material before it has reached the stage of going upon the wire screens here involved, *79and refer to parts which perform, or assist in performing, the functions of cutting, grinding, heating, or similar functions. [Last italics supplied.]
Citing the Dillingham and California Fruit Wrapping Mills (Inc.) cases, supra, as authorities, this court subsequently held, in E. Dillingham, Inc. v. United States, 63 Treas. Dec. 1510, Abstract 24027, and American Voith Contact Co., Inc. v. United States, 64 Treas. Dec. 1070, Abstract 25958, that, respectively, a paper stock refining machine, which grinds and refines pulp stock too coarse to pass through paper making screens, and a pulping machine, equipped with knives to cut up paper mixed with water, and reduce it to pulp, were properly classifiable, as claimed, in paragraph 356, as all other stock treating parts for pulp and paper machinery.
The decisions in the cases last cited are reported in brief and do not clearly reveal the rationale behind the conclusions reached. Accordingly, I have examined the official papers constituting the records thereof for further elucidation. The full opinion in the second Dil-lingham case adds little to the information supplied in the abstract, except that this court held, as a matter of law, that the involved refiner was a stock treating part for pulp and paper machinery, and it does not appear that the contention advanced by the plaintiff, in the instant case, was submitted for consideration.
In America Voith Contact Co., Inc. v. United States, supra, although counsel, in their briefs, adverted to the issue of whether a complete machine might appropriately be considered to be a part of machinery, the court did not discuss that phase of the case in its full opinion. It appears to have been primarily concerned with the question of whether the machine in issue performed the functions of cutting, grinding, beating, or similar operations, as prescribed in California Fruit Wrapping Mills (Inc.) v. United States, supra. Of course, it cannot be denied that, in holding the machine before it to be a stock treating part for pulp and paper machinery, the court implicitly sanctioned the principle that a machine may be a part within the intendment of paragraph 356, supra.
Whether the holding of the California Fruit Wrapping Mills (Inc.) case warranted such a conclusion, however, seems now a doubtful proposition. It must be remembered that the article before the court, in that case, was an item conceded to be an indispensable part of a paper making machine, not in itself a complete machine, and that, in discussing the words “stock-treating parts,” the court specifically referred to parts which perform, or assist in performing, the functions of cutting, grinding, beating, or similar functions.” [Italics supplied.] Taken in context and in the light of the merchandise involved, it would seem that the court was speaking in terms of items which are constituent elements of a unit, rather than of a total entity.
*80Moreover, if the principle of ejusdem generis applies to the function of the articles eo nomine designated in said paragraph 356, I believe it likewise applies to the character of the enumerated articles. It is my view, based upon the information supplied to Congress when it first considered this provision, that such of the knives, cutters, blades, roll bars, and bedplates specified in the paragraph as serve as instruments for machinery, are in the nature of parts of machines in the conventional sense, not in and of themselves machines which are complete units.
This view is further fortified for me by the words which Congress employed to provide for other stock treating parts. The language reads “parts for,” not “parts of,” which is a most uncommon statutory expression for the designation of parts. More often than otherwise, whenever Congress has made provision for parts, it has used the preposition “of” either alone, as in the case of the many provisions for “parts of any of the foregoing,” or in conjunction with the adverb “there,” as in “parts thereof.” Most particularly, paragraph 372 of the Tariff Act of 1930, which is the comprehensive provision for machines and machinery of many varieties, reads “parts * * * of any of the foregoing.”
While the expression “parts of machinery” might well connote any appurtenance necessary to promote the overall purpose of an aggregate of means and appliances, and thus refer to complete units (John V. Carr & Son, Inc., and A. W. Fenton Co., Inc. v. United States, 40 Cust. Ct. 292, C.D. 1996, Jett & Co. v. United States, 56 Treas. Dec. 205, T.D. 43568), the-expression “parts for machinery” is suggestive of a more limited meaning having reference to elements which do not function separately but are constituents of an entity.
For the foregoing reasons, I find merit in the position taken by the plaintiff, and would sustain its protest claims to the following extent:
All items invoiced as Skardal stock preparators and covered by entries 22483 and 10264 should be dutiable at the rate of 10 per centum ad valorem or at the rate of 9% per centum ad valorem, depending upon the date of entry within the provision for machines for making paper pulp in paragraph 372, as modified, supra.
All items covered by entries 10859 and 5694, except those invoiced as Slapas (shoes) and Malrings (cylinders), should be dutiable at the rate of 9 per centum ad valorem or at the rate of 8y2 per centum ad valorem, depending on the date of entry, in said paragraph 372, as modified, supra, as parts of machines for making paper pulp.
As to all other merchandise not hereinabove specified, all other claims should be overruled.