Slip Op. 12-69
UNITED STATES COURT OF INTERNATIONAL TRADE
FUWEI FILMS (SHANDONG) CO., LTD.,
Plaintiff,
Before: Leo M. Gordon, Judge
v.
Consol. Court No. 11-00061
UNITED STATES,
Defendant.
OPINION and ORDER
[Administrative review results remanded.]
Dated: June 1, 2012
David J. Craven, Riggle & Craven, of Chicago, IL, for Plaintiffs Fuwei Films
(Shandong) and Shaoxing Xiangyu Green Packing Co., Ltd.
David D’Alessandris, Trial Attorney, Commercial Litigation Branch, Civil Division,
U.S. Department of Justice, of Washington, DC, for Defendant United States. With him
on the brief were Tony West, Assistant Attorney General, Jeanne E. Davidson, Director
and Patricia M. McCarthy, Assistant Director. Of Counsel on the brief was Whitney
Rolig, Office of the Chief Counsel for Import Administration, International Trade
Administration, Department of Commerce, of Washington, D.C.
Ronald I. Meltzer, Patrick J. McLain, David M. Horn, and Jeffrey I. Kessler,
Wilmer, Cutler, Pickering, Hale and Door, LLP, of Washington, DC, for Defendant-
Intervenors DuPont Teijin Films, Mitsubishi Polyester Film, Inc., SKC, Inc., and Toray
Plastics (America), Inc.
Gordon, Judge: This consolidated action involves an administrative review
conducted by the U.S. Department of Commerce (“Commerce”) of the antidumping duty
order covering Polyethylene Terephthalate (“PET”) Film from the People’s Republic of
China. See Polyethylene Terephthalate Film from the People’s Republic of China,
Consol. Court No. 11-00061 Page 2
76 Fed. Reg. 9,753 (Dep’t of Commerce Feb. 22, 2011) (“Final Results”) and
accompanying Issues and Decision Memorandum, A-570-924 (Feb. 14, 2011), available
at http://ia.ita.doc.gov/frn/summary/prc/2011-3909-1.pdf (last visited June 1, 2012)
(“Decision Memorandum”). Before the court are motions for judgment on the agency
record filed by Fuwei Films (Shandong) Co., Ltd., and Shaoxing Xiangyu Green Packing
Co., Ltd. (“Green”), respondents in the administrative proceeding (collectively
“Respondents”), and DuPont Teijin Films, Mitsubishi Polyester Film, Inc., SKC, Inc., and
Toray Plastics (America), Inc. (collectively “DuPont”), petitioners in the administrative
proceeding. The court has jurisdiction pursuant to Section 516A(a)(2)(B)(iii) of the Tariff
Act of 1930, as amended, 19 U.S.C. § 1516a(a)(2)(B)(iii) (2006), 1 and 28 U.S.C. §
1581(c) (2006).
Respondents challenge Commerce’s (1) surrogate valuation of labor inputs, (2)
alleged clerical errors for Green’s packing material and per-unit electricity and water,
and (3) surrogate valuation of PET chips. 2 DuPont also challenges the surrogate
valuation of Respondents’ PET chips. For the reasons set forth below, this matter is
remanded to Commerce.
I. Standard of Review
For administrative reviews of antidumping duty orders, the court sustains
determinations, findings, or conclusions of the U.S. Department of Commerce unless
1
Further citation to the Tariff Act of 1930, as amended, are to the relevant provisions of
Title 19 of the U.S. Code, 2006 edition.
2
PET chips are the primary raw material for production of PET film.
Consol. Court No. 11-00061 Page 3
they are “unsupported by substantial evidence on the record, or otherwise not in
accordance with law.” 19 U.S.C. § 1516a(b)(1)(B)(i). More specifically, when reviewing
agency determinations, findings, or conclusions for substantial evidence, the court
assesses whether the agency action is reasonable given the record as a whole. Nippon
Steel Corp. v. United States, 458 F.3d 1345, 1350-51 (Fed. Cir. 2006). Substantial
evidence has been described as “such relevant evidence as a reasonable mind might
accept as adequate to support a conclusion.” DuPont Teijin Films USA v. United
States, 407 F.3d 1211, 1215 (Fed. Cir. 2005) (quoting Consol. Edison Co. v. NLRB, 305
U.S. 197, 229 (1938)). Substantial evidence has also been described as “something
less than the weight of the evidence, and the possibility of drawing two inconsistent
conclusions from the evidence does not prevent an administrative agency's finding from
being supported by substantial evidence.” Consolo v. Fed. Mar. Comm'n, 383 U.S. 607,
620 (1966). Fundamentally, though, “substantial evidence” is best understood as a
word formula connoting reasonableness review. 3 Charles H. Koch, Jr., Administrative
Law and Practice § 9.24[1] (3d. ed. 2011). Therefore, when addressing a substantial
evidence issue raised by a party, the court analyzes whether the challenged agency
action “was reasonable given the circumstances presented by the whole record.”
Edward D. Re, Bernard J. Babb, and Susan M. Koplin, 8 West's Fed. Forms, National
Courts § 13342 (2d ed. 2010).
Consol. Court No. 11-00061 Page 4
II. Discussion
A. Voluntary Remand
Commerce has requested a voluntary remand to (1) address Respondents’
arguments regarding the surrogate value for the labor input, and (2) correct a clerical
error in Green’s per-unit water and electricity costs, which the court will
grant. See SKF USA Inc. v. United States, 254 F.3d 1022, 1029 (Fed. Cir. 2001).
B. Green’s other Clerical Error Allegation
When calculating Green’s packing material expenses for the preliminary results,
Commerce included a space between a parenthesis and a slash mark in a line of
computer code. Green did not raise this issue in its case brief, nor did Green raise the
issue as a clerical error submission following issuance of the Final Results. Green has
instead raised this issue for the first time in its opening brief in this action, alleging that
the extra space caused an error in the conversion (or non-conversion) of units from tons
to kilos.
The extra space actually has no effect whatsoever on the calculation. Defendant
explains that the software computes each instruction line as a whole. Def.’s Br. at 16 n.
5, Nov. 30, 2011, ECF No. 55 (quoting SAS Institute, Inc., SAS 9.3 Language
Reference: Concepts 21 (Cary, NC SAS Institute, Inc. 2011) (“A blank [space] is not
treated as a character in a SAS statement unless it is enclosed in quotation marks . . .
[t]herefore, you can put multiple blanks any place in a SAS statement where you can
put a single blank. It has no effect on the syntax.”). In its reply brief, Green raises an
Consol. Court No. 11-00061 Page 5
entirely new argument about an apparently different clerical error affecting the
converted or calculated weight of Green’s plastic caps. See Respondents’ Reply Br. at
11-12, Jan. 4, 2012, ECF No. 58-1 (“Plaintiffs initially believed that this error was
reflected in the identified instruction. Apparently it was not.”). The time of one’s reply
brief, however, is not the opportune moment to figure out the specifics of one’s
argument, and introduce a brand new theory. See Scheduling Order at 6, July 14,
2011, ECF No. 36 (“The reply brief may not introduce new arguments.”). The court will
therefore sustain Commerce’s treatment of Green’s packing expenses.
C. Surrogate Valuation of PET Chip Inputs
When valuing the factors of production in a non-market economy proceeding,
Commerce must use the “best available information” when selecting surrogate data
from “one or more” surrogate market economy countries. 19 U.S.C. § 1677b(c)(1), (4).
Commerce's regulations provide that surrogate values should “normally” be publicly
available and from a single surrogate country. 19 C.F.R. § 351.408(c) (2008).
Commerce prefers data that reflects a broad market average, is publicly available,
contemporaneous with the period of review, specific to the input in question, and
exclusive of taxes on exports. Certain Pneumatic Off–the–Road Tires from the People's
Republic of China, 73 Fed. Reg. 40,485 (Dep't of Commerce July 15, 2008) and
accompanying Issues and Decision Memorandum cmt. 10 at 26, A–570–912 (July 7,
2008), available at http://ia.ita.doc.gov/frn/summary/PRC/E8–16156–1.pdf (last visited
this date).
Consol. Court No. 11-00061 Page 6
“[T]he process of constructing foreign market value for a producer in a nonmarket
economy country [using surrogate values] is difficult and necessarily imprecise.” Nation
Ford Chem. Co. v. United States, 166 F.3d 1373, 1377 (Fed. Cir. 1999) (citation
omitted) (internal quotation marks omitted). Importantly, Commerce’s surrogate value
decision or data choice is not rendered unreasonable because an alternative inference
or conclusion could be drawn from the administrative record. Daewoo Elec. Co. v. Int’l
Union of Elec., Elec., Tech., Salaried & Mach. Workers, 6 F.3d 1511, 1520 (Fed. Cir.
1993). Rather, the court will upset Commerce’s surrogate valuation only if no
“reasonable mind could conclude that Commerce chose the best available information.”
Zhejiang DunAn Hetian Metal Co. v. United States, 652 F.3d 1333, 1341 (Fed. Cir.
2011) (quoting Goldlink Indus. Co. v. United States, 30 CIT 616, 619, 431 F. Supp. 2d
1323, 1327 (2006)) (internal quotation marks omitted).
In determining the “best available information” to value Respondents’ PET film
inputs of bright polyester and master batch (“BP&MB”) PET chips, Commerce needed
to determine which provision of the Harmonized Tariff Schedule (“HTS”) of India (the
primary surrogate country) best applied to Respondents’ BP&MB chips. This was an
involved undertaking:
When selecting surrogate values with which to value the FOPs used to
produce subject merchandise, the Department is directed to use the “best
available information” on the record. See Section 773(c)(1) of the Act. As
noted by Petitioners, when selecting surrogate values for use in an NME
proceeding, the Department’s preference is to use, where possible, a
range of publicly available, non-export, tax-exclusive, and product-specific
prices for the POR, with each of these factors applied non-hierarchically to
the particular case-specific facts and with preference to data from a single
Consol. Court No. 11-00061 Page 7
surrogate country. In the Preliminary Results, the Department selected a
surrogate value based on an eight-digit basket category that was the most
specific on record to the input in question. The Department valued PET
chips with HTS 3907.60.20, “Polyethylene Terephthalate With Intrinsic
Viscosity >= 0.64 Dl/G & <=0.72 Dl/G,” the HTS subheading applicable to
Respondents’ FOPs for PET chips with the intrinsic viscosity meeting this
description. However, the Department has reviewed the additional factual
information placed on the record by Respondents regarding the
methodologies employed for measuring intrinsic viscosity and, after further
review of the certificates of analysis submitted by Respondents, the
Department has determined that there is insufficient evidence on the
record to support the selection of HTS 3907.60.20 as the only surrogate
value for the inputs that comprise all, or nearly all, of Respondents’ direct
materials, and the great majority of Respondents’ cost of manufacturing.
Therefore, for the final results, the Department has determined to use the
GTA Indian import data under both HTS subheadings 3907.60.10 and
3907.60.20. Data for both subheadings are publicly available, broad
market averages, contemporaneous with the POR, tax-exclusive, and
representative of significant quantities of imports, thus satisfying critical
elements of the Department’s surrogate value test.
Respondents have argued that the customs service of the Indian
government uses a different testing methodology for calculating intrinsic
viscosity than those used by Respondents in their questionnaire
responses. Information on the record regarding testing methods in India,
i.e., a letter from an Indian customs official secured by Respondents’
counsel during the less than fair value investigation, indicates that to
correctly classify merchandise entering India, importers should have
intrinsic viscosity details for their product(s) based on ASTM standards.
The letter, dated April 7, 2008, was written only six months prior to the
beginning of the POR. Further, Respondents have also submitted
information regarding intrinsic viscosity testing methods commonly used in
the PRC, which are testing methods conforming to those set forth by ISO,
but which are not the same as the ASTM testing protocol for measuring
PET chip intrinsic viscosity used in India. Finally, the Department has
reviewed the submission of the DuPont Group, respondents in the
investigation, which Respondents submitted to the record of this review
subsequent to the Preliminary Results. In the investigation, the DuPont
Group submitted to the public record a list of its suppliers, the PET chips
that it purchased from each supplier, the PET chip intrinsic viscosity by the
suppliers’ specification and, finally, conversions of these intrinsic viscosity
values to demonstrate what the values would be using other testing
Consol. Court No. 11-00061 Page 8
methods. Thus, Respondents’ submitted factual information indicates that
there are several different testing methods for measuring the intrinsic
viscosity of PET chips, which differ based upon the nature and proportion
of solvents used in the testing process. The actual testing method used to
measure the intrinsic viscosity of PET chips is done at the discretion of the
tester. Depending upon the testing method used, the intrinsic viscosity of
PET chips could be measured either above or below the 0.64 Dl/G
threshold which defines HTS 3907.60.20.
The record evidence in this review supports the Department’s use of HTS
3907.60.20 as we concluded in our Preliminary Results. Nevertheless, we
reviewed again the certificates of analysis that Respondents submitted to
the record prior to the Preliminary Results, and it appears from the record
that the testing method used by Respondents’ suppliers to provide the
intrinsic viscosity values reported on the certificates is not disclosed.
Further, the certificates of analysis for Respondents’ PET chips indicates
that at least some of Respondents’ PET chips have an intrinsic viscosity
very near the 0.64 Dl/G threshold which defines the upper limit of HTS
3907.60.10, and the lower limit of HTS 3907.60.20. Due to the absence of
record evidence that would provide the Department with information for
determining the correct intrinsic viscosity and the most accurate HTS
subheading, the Department believes that some of Respondents’ PET
chips match the description for HTS 3907.60.10. Moreover, as the bright
polyester chip FOP and master batch chip FOP make up the vast majority
of the cost of manufacturing for Respondents, it is critical in this instance
that the Department applies a comprehensive valuation for the inputs at
issue.
Respondents and Bemis have noted various PET chip quantity and value
examples on the record for other India HTS subheadings, and argued that
the quantity in the surrogate value used in the Preliminary Results (i.e.,
HTS 3907.60.20) is lower when compared to these examples. In
particular, Respondents have contrasted the quantity of HTS 3907.60.20
with the greater merchandise quantity of HTS 3907.60.10, the HTS
subheading used to value DuPont Group’s PET chip input in the original
investigation. Respondents have presented information showing that the
adjacent HTS 3607.60.10 represents a more reliable quantity than the
Indian HTS 3907.60.20. Generally, the Department’s practice has found
that the existence of lower commercial quantities and higher prices alone
does not necessarily indicate that price data are distorted or
misrepresented and, thus, are not sufficient to exclude particular surrogate
values absent specific evidence that the values are otherwise aberrational.
Consol. Court No. 11-00061 Page 9
Moreover, as stated in the preceding paragraph, the Department has
determined to apply an equal balance of all surrogate values that are, or
could potentially be applicable to, Respondents’ PET chips. Therefore,
due to: (1) the reasonable likelihood that Indian HTS 3907.60.10 may be
applicable, at least in part, to Respondents’ inputs; and (2) the magnitude
of the surrogate value in relation to Respondents’ cost of production, the
Department has applied the simple-average of the two weighted-average
unit values of Indian HTS subheadings 3907.60.10 and 3907.60.20 to
calculate the surrogate values for bright polyester chips and master batch
chips in order to calculate as accurately as possible Respondents’
antidumping margins for the final results. The information on the record
supports a finding that both HTS subheadings may be equally applicable
to Respondents’ inputs. The Department has applied the simple-average
of the two weighted-average unit values of the Indian HTS subheadings
3907.60.10 and 3907.60.20, and not a weighted-average unit value of all
merchandise under these HTS subheadings, to avoid an imbalanced
result due to the greater merchandise quantity of HTS 3907.60.10.
Finally, Respondents have submitted Infodrive India data as a
corroborative tool to show that the GTA surrogate value data are distorted.
Due to the Department’s well-established reservations regarding the use
of Infodrive data, either as a corroborative tool or price benchmark, the
viability of this particular Infodrive dataset (and, thus, Respondents’ claims
that the GTA data are distorted) must be analyzed in accordance with
Department practice and policy regarding the use of Infodrive data. The
Department has stated that it will consider Infodrive data to further
evaluate import data, provided: (1) there is direct and substantial evidence
from Infodrive reflecting the imports from a particular country; (2) a
significant portion of the overall imports under the relevant HTS category
is represented by the Infodrive India data; and (3) distortions of the
surrogate value in question can be demonstrated by the Infodrive data; but
that the Department will not use Infodrive data when they do not account
for a significant portion of the imports which fall under a particular HTS
subheading.
On point (1), all countries but one that are reported in GTA for HTS
3907.60.10 are reported in the Infodrive data, and the Infodrive data for
HTS 3907.60.20 do indicate shipments from Germany to India as shown
in GTA. Regarding point (2), we find that the Infodrive India is under-
inclusive, representing only 48.44 percent of POR value and 53.05
percent of POR quantity for Indian HTS 3907.60.10, and only 79.16
percent of POR value and 84.72 percent of POR quantity for Indian HTS
Consol. Court No. 11-00061 Page 10
3907.60.20, as reported in the official source. Over half of the value in
HTS 3907.60.10, and one-fifth of the value in HTS 3907.60.20, based on
official Indian import statistics is not accounted for by the Infodrive.
Information in this unaccounted for portion of the actual entries may
contradict the claim that these HTS numbers produce a distortive average
value. In numerous cases, the Department has rejected Infodrive data
because they did not account for a significant portion of the overall official
import data. If the Department considers that Infodrive information is not
conclusive regarding the validity of the surrogate value based on HTS
3907.60.10 and HTS 3907.60.20, the Department may continue to apply
the surrogate value. As to point (3), Respondents and Bemis have not
provided any benchmarks to show that the AUVs are abnormally high or
the quantity is abnormally low. Furthermore, Infodrive India data are
collected by a private party that only reviews bills of lading for commercial
descriptions. The data in Infodrive may differ from the actual entries of the
shipments as recorded in the Indian official import statistics.
In sum, the Department has applied the simple average of the two
weighted-average unit values of the Indian HTS subheadings 3907.60.10
and 3907.60.20 to calculate the surrogate values for bright polyester chips
and master batch chips for the final results. Further, Respondents’
submitted Infodrive India data are not a reliable basis for the Department
to abandon the surrogate value calculated by the Department in the
Preliminary Results, as doing so would require a speculative interpretation
of the data, and also because the data are an under-inclusive portion of
the officially reported Indian import data. Therefore, because there is
insufficient evidence that Indian HTS 3907.60.20 should be used
exclusively for valuing Respondents’ PET chips, as mentioned above for
the final results, we will value Respondents’ PET chip inputs using Indian
import statistics HTS subheadings 3907.60.10 and 3907.60.20.
Because the Department has not departed from its selection of India as
the surrogate country and has maintained the application of the selected
surrogate value from India for PET chips in this AR, the Department need
not address Respondents’ arguments against the application of surrogate
values from Thailand, and surrogate values from other potential surrogate
countries that may or may not have been properly translated.
Decision Memorandum at 12-16 (footnotes omitted).
Both Respondents and DuPont challenge Commerce’s surrogate valuation of
Respondent’s PET chips as the “best available information,” 19 U.S.C. § 1677b(c)(1).
Consol. Court No. 11-00061 Page 11
DuPont argues that the administrative record supports HTS 3907.60.20 as the one,
true, correct data source for Respondents’ PET chips, while Respondents argue that
HTS 3907.60.10 is the one, true, correct data source.
During the review Respondents submitted test certificates from their suppliers
that showed intrinsic viscosities (“IVs”) between 0.64 and 0.72 dl/g, placing them
squarely under HTS 3907.60.20 if the testing method (ISO or ASTM) is ignored. The
certificates did not identify the testing method used to calculate the IVs. Respondents
addressed this problem indirectly by relying on submissions from the investigation that
had been provided by the “DuPont Group,” which consisted of the participating
mandatory respondent, DuPont Teijin Films China Limited, together with DuPont Teijin
Hongji Films Ningbo Co., Ltd., and DuPont-Hongji Films Foshan Co., Ltd.—all apparent
affiliates of the petitioner here, DuPont Teijin Films. In the investigation the DuPont
Group argued, and Commerce agreed, that the correct surrogate value measure was
3907.60.10, not 3907.60.20. Issues and Decision Memorandum for Final Determination
of Sales at Less than Fair Value: Polyethylene Terephthalate Film, Sheet, and Strip
from the People’s Republic of China at 2-3, A-570-924 (Sept. 17, 2008), available at
http://ia.ita.doc.gov/frn/summary/prc/E8-22454-1.pdf (last visited this date). The DuPont
Group (1) explained and documented that ISO tests produce higher IVs than ASTM
tests, and (2) submitted detailed charts recalculating the DuPont Group’s IVs under
ASTM standards. Commerce, though, did not address these submissions, relying on
different reasons to favor HTS 3907.60.10 over 3907.60.20 (import statistics for
Consol. Court No. 11-00061 Page 12
3907.60.20 contained an insignificant quantity of imports not representative of the
DuPont Group’s PET chip purchase volume or consumption experience). Id. With this
background in mind, the court first addresses DuPont’s arguments, then Respondents’.
1. DuPont’s Arguments
At the outset, the court must note that DuPont has assumed a somewhat difficult
position by arguing that HTS 3907.60.20 constitutes the only proper dataset (for
Respondents PET Chips) shortly after the DuPont Group successfully argued in the
investigation that HTS 3907.60.10 is the only proper dataset (for the DuPont Group’s
PET chips). Here the main thrust of DuPont’s argument is that Commerce’s decision to
include HTS 3907.60.10 in its surrogate valuation is conjectural. See DuPont Br. at 5-8,
ECF No. 46-2. “Conjecture” though is not really a word that springs to mind after
reading Commerce’s detailed analysis quoted above, which does not appear to be the
product of mere guesswork. DuPont’s contention is also a surprising, if unfair,
characterization given the position the DuPont Group assumed in the investigation.
DuPont argues that Commerce’s conclusion that the ISO standard is “commonly”
used in China (and by extension, Respondents) is conjecture. DuPont Br. at 5-7.
DuPont builds its argument from a cherry-picked statement in China Nat'l Machinery
Import & Export Corp. v. United States, 27 CIT 255, 268, 264 F. Supp. 2d 1229, 1240
(2003) ("CMC I"), “Conjectures are not facts and cannot constitute substantial
evidence." DuPont, however, neglects to cite or discuss the subsequent history of
CMC I, in which Commerce maintained its original position on remand, Court No. 01-
Consol. Court No. 11-00061 Page 13
01114, May 16, 2003, ECF No. 40, which the court then sustained as reasonable
despite its earlier (and ultimately unfounded) concerns about potential “conjecture.”
See China Nat'l Machinery Import & Export Corp. v. United States, 27 CIT 1553, 293 F.
Supp. 2d 1334 (2003), aff’d without opinion, 104 Fed. Appx. 183 (Fed. Cir. 2004).
CMC I, therefore, has limited persuasive value given its subsequent history.
Here, the question is not whether Commerce engaged in “conjecture” that fails to
qualify as “substantial evidence,” or that Commerce predicated its decision on mere
“suspicion,” DuPont Br. at 5-8, (characterizations that are hard to justify given
Commerce’s detailed analysis above as well as the results of the investigation), but
simply whether Commerce’s findings and conclusions supporting its ultimate
determination to use data from HTS 3907.60.10 are reasonable given the
circumstances presented by the record. DuPont argues that Commerce’s conclusion
that Chinese producers “commonly” use the ISO standard is unreasonable because the
administrative record did not contain direct evidence that the ISO standard is universally
used in China. DuPont’s insistence upon direct evidence is an unusual stance in a
proceeding in which Commerce determines “surrogate” values that substitute for the
direct evidence of a respondent’s own accounting. It is all the more curious because
the statute does not require, nor have the courts imposed, a requirement of evidentiary
exactitude for Commerce’s surrogate valuations.
If framed in absolutes, DuPont is correct that the administrative record does not
establish that everyone in China always uses the ISO standard. The record also does
Consol. Court No. 11-00061 Page 14
not establish that the ISO standard is never used in China. Judicial review of
Commerce’s action here does not depend on absolutes like always or never, but
instead on whether Commerce’s inference about Respondents’ ISO utilization is
reasonable given the information on the administrative record. It is. As Defendant
explains, any lack of documentation explicitly linking Respondents’ inputs to the ISO
testing method is balanced by the DuPont Group information from the investigation3
demonstrating that Chinese PET chip producers generally use the ISO method, and
have done so for the models of PET chip that Respondents consumed. Decision
Memorandum at 13.
DuPont also relies on Peer Bearing Company-Changshan v. United States, 35
CIT ___, ___, 752 F. Supp. 2d 1353, 1369-71 (2011) to argue that if Commerce was
uncertain about which Indian HTS subheading to apply, it was obligated to explain why
that data was superior to Thai surrogate value data. Peer Bearing, though, is not
applicable here. In Peer Bearing the court determined Commerce’s preference for
using data from a single country unreasonable when the data was demonstrably
aberrational as compared to certain benchmark prices, and alternative data sources
could be better corroborated. The issue here focuses on which HTS category is most
appropriate, not whether the values reported for the HTS categories are aberrational.
For the foregoing reasons the court believes DuPont’s arguments regarding
3
Respondents submitted the information from the investigation on the record of the
administrative review.
Consol. Court No. 11-00061 Page 15
Commerce’s surrogate valuation of Respondents PET chips lack merit. Given the
information on the administrative record, it was reasonable for Commerce to include
data from HTS 3907.60.10 in its surrogate valuation of Respondents’ PET chips. The
question remains, though, whether a reasonable mind would conclude on this
administrative record that data from HTS 3907.60.10, and that provision alone, is the
best available information to value Respondents’ PET chips, or, if not, whether a
reasonable mind would conclude that Commerce’s simple average of the two HTS
provisions constitutes the best available information.
2. Respondents Arguments
Respondents contend that Commerce’s use of unconverted IV levels from China
for Indian HTS subheadings is unreasonable (unsupported by substantial evidence), as
is Commerce’s use of an un-weighted (simple) average of Indian HTS 3907.60.10 and
Indian HTS 3907.60.20 as the basis for the surrogate value. Commerce ultimately
determined that a “broader” straddling of import data for HTS 3907.60.10 and HTS
3907.60.20 is the best available information of Respondents’ PET chip value, and that
reliance upon the data for only one or the other HTS provisions, or a weighted average
of both, is not a better surrogate. The court has identified three specific infirmities that
challenge the reasonableness of Commerce’s determination, each of which requires
further explanation or reconsideration by Commerce.
First, Respondents relied on a summary chart prepared by the DuPont Group in
the investigation covering the ISO-to-ASTM conversions of the models of PET chips
Consol. Court No. 11-00061 Page 16
Respondents purchased from certain of the listed suppliers. See, e.g., Respondents’
Br. at 8-9 (citing PD 137 at Ex. PSV-8, Ex. 6-H (frm 468) and 6-I (frms 470-71)).
Considering the record and the arguments, Commerce agreed that Respondents had
provided additional information showing that “HTS 3607.60.10 represents a more
reliable quantity than the Indian HTS 3907.60.20” and Commerce found a “reasonable
likelihood” that Indian HTS 3907.6010 may apply to “some” of Respondents’ PET chips.
Decision Memorandum at 13-14. This requires amplification.
Commerce’s statement could be construed as a distinction between
Respondents’ BP&MB and PETG chip model purchases, but the test report for the latter
shows an IV level far in excess of even the upper limit of HTS 3907.60.20, implying that
HTS 3907.60.90 (without regard to the product’s IV level) would be the correct
classification for that model. Commerce’s stated focus for purposes of valuing
Respondents’ factors of production, of course, is the IV levels of Respondents’ BP&MB
chips. Each of the test reports for the BP&MB chips declares a single IV level, without
indication of uncertainty or standard deviation. If one accepts the logic that the proper
classification of Respondents’ BP&MB chips in India requires conversion from
ISO (China) to ASTM (India), then why are only “some” and not all of those chips
considered within HTS 3907.60.10? And why does that logic also not undermine the
reasonableness of any continued reliance upon the “stated” facial declarations of the IV
levels on the BP&MB chip test reports?
The second matter requiring clarification is Commerce’s consideration of the
Consol. Court No. 11-00061 Page 17
record data for HTS 3907.60.20, and specifically Commerce’s finding on the unreliability
of Infodrive data to corroborate that data. As a matter of practice, Commerce may
consider Infodrive data as a corroborative tool when (1) there is direct and substantial
evidence from Infodrive reflecting the imports from a particular country; (2) a significant
portion of the overall imports under the relevant HTS category is represented by the
Infodrive data; and (3) distortions of the surrogate value in question can be
demonstrated by the Infodrive data. Decision Memorandum at 15 (citing Lightweight
Thermal Paper from the People’s Republic of China, 73 Fed. Reg. 57,329 (Dep’t of
Commerce Oct. 2, 2008) (final LTFV determination) and accompanying Issues and
Decision Memorandum at cmt. 9, A-570-920 (Sept. 25, 2008), available at
http://ia.ita.doc.gov/frn/summary/prc/E8-23271-1.pdf (last visited this date)). Applying
that framework here, Commerce concluded that the Infodrive data satisfied the first
prong, but not the second. Commerce, therefore, declined to consider the Infodrive
data. Decision Memorandum at 16. More specifically, Commerce found the Infodrive
data for HTS 3907.60.10 under-inclusive as it represented only 48.44 percent of period
of review by value and 53.05 percent of period of review by quantity as compared with
GTA data. This finding was reasonable under Commerce’s framework. However,
Commerce’s finding that the Infodrive data for HTS 3907.60.20 could also not be used
as a corroborative tool requires further clarification for two reasons.
First, Commerce concluded the data under-inclusive because they represented
“only” 79.16 percent by value and 84.72 percent by quantity for HTS 3907.60.20. Id. at
Consol. Court No. 11-00061 Page 18
15. As support, Commerce cited Lightweight Thermal Paper. In Lightweight Thermal
Paper, however, Commerce accepted Infodrive data that represented 88 percent of the
quantity of country-specific imports. Why does Commerce consider import quantity data
covering slightly less than 85 percent unreliable, but 88 percent reliable?
Second, Respondents explained that (1) all of the Infodrive data for HTS
3907.60.20 for this period of review consisted of non-PET product exported from
Germany (Respondents’ Br. at 12-13), (2) there is no evidence in the record of what
product the “missing” data pertained to (15.28 percent by quantity), (3) the quantity
represented by the “missing” data would be consistent with less than one full shipment,
(4) the Infodrive data from the investigation showed that the imports were of the same
non-PET material, and (5) even if all of the unidentified material in HTS 3907.60.20
(totaled over a 12-month period) were PET chips, the most that such quantity could be
is 8.20 metric tons, or nearly half of the quantity (totaled over a six-month period) that
Commerce rejected in the original investigation as insignificant. These appear to be
sound arguments testing the reasonableness of Commerce’s unwillingness to consider
as corroboration, the Infodrive data for HRS 3907.60.20. Commerce needs to provide
an explanation that takes these considerations into account.
These arguments, in turn, also lead to the third and final matter requiring further
explanation: Commerce’s use of a simple (as opposed to weighted) average of the two
HTS data sets. Because Commerce applied the simple average for the first time in the
Final Results, Respondents did not have the opportunity to challenge that decision
Consol. Court No. 11-00061 Page 19
during the administrative review. In their briefs before the court, Respondents have
raised legitimate concerns that test the reasonableness of Commerce’s use of a simple
average, which according to Respondents, gives “inordinate weight to a provision [HTS
3907.60.20] with very small quantities [that] also does not consist of the kind of goods
[that] comprise the factor of production.” Respondents’ Reply Br. at 8. Commerce
needs to address the arguments raised by Respondents, see Respondents’ Br. at 14-
17; Respondents’ Reply Br. at 8.
III. Conclusion
Accordingly, it is hereby
ORDERED that this action is remanded to Commerce to address Respondents’
submissions regarding the surrogate valuation of its labor inputs, as well as the
inadvertent transposition of Green’s per-unit consumption levels for water and
electricity; it is further
ORDERED that the Final Results are sustained with respect to Commerce’s
calculation of Green’s packing material expenses; it is further
ORDERED that Commerce on remand clarify or reconsider, as appropriate, the
issues the court identified regarding Commerce’s surrogate valuation of Respondents’
PET chips; it is further
ORDERED that Commerce shall file its remand results on or before August 1,
2012; and it is further
Consol. Court No. 11-00061 Page 20
ORDERED that, if applicable, the parties shall file a proposed scheduling order
with page limits for comments on the remand results no later than seven days after
Commerce files its remand results with the court.
/s/ Leo M. Gordon
Judge Leo M. Gordon
Dated: June 1, 2012
New York, New York