The issue here is whether Wolter, Ernstberger and Ritter (Wolter) have proved beyond a reasonable doubt1 that there was a successful reduction to practice of their invention before the July 18, 1961 filing date of patent No. 3,101,505 of the senior party Belicka, Kenny and Longin (Belicka). The Board of Patent Interferences found that Wolter had not discharged his burden of proof and awarded priority to Belicka. We find nothing from our review of the record to support appellants’ allegation of reversible error and affirm the board’s decision.
The invention is defined by counts 1 through 9 as a “floor care machine.” The board treated count 1 as typical. That count, separated into its elements, reads:
1. In a floor care machine,
(a) a frame,
(b) an electric motor supported on said frame,
(c) rotary surface treating means below said frame and driven by said motor,
(d) a manipulating handle pivotally connected to said frame,
(e) a cleaning liquid tank removably mounted on said handle,
(f) means for conveying liquid from said tank to the floor adjacent to said rotary means,
(g) a liquid pick-up suction nozzle depending from said frame,
(h) a fan driven by said motor,
(i) conduit means for connecting the inlet of said fan to said nozzle,
(j) a waste liquid tank interposed in said conduit means and removably mounted on said handle, and
(k) means in the last-mentioned tank for separating liquid from the air passing therethrough.
Wolter describes the remaining counts as calling for:
* * * one or more additional features or variations such as inclusion of a rinse water tank selectively connectable to the liquid conveying means or the provision of a squeegee in or associated with the suction nozzle or the provision of a liquid wax reservoir, together with means for conveying the liquid wax to the floor, or in the provision of a manifold for the lower ends of the cleaning liquid and *257waste liquid tanks or for valve actuating means carried on the handle.
In further explanation of the invention, Wolter states, with citations of record pages omitted:
The objects and advantages of the floor-conditioning apparatus defined by the issue counts are stated in the Belicka et al. patent as the provision of:
“ * * * a surface treating machine and more particularly to a relatively small machine of this type suitable for use in a home by the housewife.”
«* * * a machine having one or more rotary scrubbing elements for contacting a floor, together with means under the control of the operator for feeding a detergent liquid to the floor in the neighborhood of the scrubbing means in combination with a wet pick-up arrangement whereby the detergent and dissolved dirt may be removed from the floor, leaving the latter practically dry.”
“ * * * means also under the control of the operator for supplying rinse water or the like to the floor in the neighborhood of the scrubbing means in order that any remaining traces of detergent may be diluted thereby, the water pickup means then serving to remove the rinse water from the floor.”
“ * * * removable reservoirs for holding the liquid detergent and the rinse water and a removable container for accumulating the liquid which is picked up, * * * easily removable from the rest of the apparatus in order that they may be independently carried to a sink or the like for convenience in filling and emptying.”
“ * * * a liquid wax reservoir, also easily removable from the rest of the apparatus * * * ” and
“ * * * means under the control of the operator for applying liquid wax to the surface in order that the device may also serve as a floor polisher.”
Belicka is restricted to his July 18, 1961 filing date for conception and reduction to practice since he submitted no evidence of earlier activities.
The evidence on behalf of Wolter includes testimony of Wolter, Ernstberger and Ritter, as well as seven others— Clowers, Jepson, Vander Velde, Lewis, Thrams, Hegerieh and Neben — who were employed by their assignee, Sunbeam Corporation,2 at the time under consideration. Also submitted were certain physical and many documentary exhibits, in total number 278. The documentary exhibits, in large part, are drawings showing the construction of two models of the machine and their components discussed hereafter.
Wolter’s case is predicated primarily on a floor care machine, or scrubber, introduced as Exhibit 5. More specifically, the Wolter brief states that the “sole question” presented to us is “whether or not the proofs adduced by the party Wolter et al. sufficiently establish successful operation of the floor conditioning apparatus” of that Exhibit “to constitute a reduction to practice of the subject matter of the issue counts prior to July 18, 1961.” It is unquestioned that a machine was built and tested prior to that date, and that it meets the terms of count 1 and nearly all of the other counts.3
*258Wolter, Ernstberger and Ritter all testified that they operated the Exhibit 5 machine. However, the board stated regarding their testimony (references to the record omitted):
* * * none of them clearly stated that it performed the function primarily intended, namely clean a floor. Ernstberger * * * stated in reference to entries on a project log sheet (exhibit 156) that the machine did everything expected, that he scrubbed a floor, and that it picked up water. As to this self-serving testimony there is no evidence as to the initial and final condition of the floor. Ritter testified * * * substantially in the same manner as Ernstberger. Wolter testified that he operated the machine of exhibit 5 but his testimony rather than indicating successful operation indicates the contrary. He testified that the laboratory found objections to the methodology of the design * * * and they were not satisfied with the provisions for separating dirty water from clean, and for separating foam from the air * * *
The board next discussed Exhibit 157, a report of laboratory tests on the machine of Exhibit 5. It noted that Spano and Heider, who conducted the tests, did not testify although they were still employees of Sunbeam. It acknowledged testimony of Neben, the supervisor of Spano and Heider, that he read and approved the results of the tests but found his testimony “devoid of actual observance of the tests.” It regarded “acceptance” of the reported test results by Neben as inadequate “to prove a reduction to practice. Kear v. Roder, 28 CCPA 774; * * * [115 F.2d 810, 47 USPQ 458].” The board further stated:
The party Wolter et al. appears to be arguing that Exhibit 157 comes within the purview of the Federal Shop Book Rule 28 U.S.C. 1732. This rule was not intended to apply to laboratory test notes. Alpert v. Slatin 49 CCPA 1343; * * * [305 F.2d 891; 134 USPQ 296].
The testimony of the other witnesses regarding the testing of Exhibit 5 was discussed by the board as follows:
The corroborating witnesses Clowers, VanderVelde, Jepson and Hegerich all testified they saw the machine of exhibit 5 in operation but their testimony singly or collectively does not prove a reduction to practice. Clowers testified * * * that he saw liquid dropped and picked up by the machine, however he gave no testimony as to the condition of the floor or whether it was in fact cleaned. The testimony of VanderVelde is similar. Jepson testified * * * that as far as he could recall it did a good job of scrubbing the floor and picking up water. But we have no information as to the condition of the floor before and after scrubbing. If the machine were operated on a clean floor it would not be possible to determine if the machine performed its intended cleaning function or not.
The letter (exhibit 277) written by the witness Hegerich merely describes the operation in superlatives but is silent as to the conditions of the floor besides stating that the floor was dried satisfactorily. His oral testimony was uncertain as to the identity of the machine he actually saw operate. We further note that the last line of the third paragraph of exhibit 277 refers to a water pump. Neither of the models exhibits 5 and 45 have a water pump as such, but the earlier model, exhibit 82, did have such a pump * * *. Furthermore, the uncorroborated test report (Exhibit 157) at p. 7, third paragraph does not support the glowing first paragraph of exhibit 277.
The board also considered testimony regarding tests of a second model of *259the Wolter machine, Exhibit 45, which were completed after Belicka’s filing date. The board found, that testimony also inadequate to prove Wolter’s case, characterizing it as “substantially the same as that relative to exhibit 5.” The board thought it significant that, after certain home tests of Exhibit 45 were completed about November 6, 1961, no further evidence of activity with respect to the project number under which the physical exhibits were made appears in the record until a memorandum of March 1, 1963. In that memorandum, Jepson, who was in charge of research and development at Sunbeam for a long period prior to his retirement in 1963, advised Sunbeam patent attorney Lewis that Wolter, Ernstberger and Ritter were the inventors of the “Suction Floor Scrubber.”
Wolter emphasizes favorable comments regarding the tests of Exhibit 5 by the inventors and other witnesses as demonstrating reduction to practice. At oral argument, he also stated that he now relies on the test report designated Exhibit 157 as proof of tests of Exhibit 5 amounting to a reduction to practice, specifically retracting a statement made in his brief.4
The basic question here is whether the combination of elements of the invention as defined in the counts was shown to have operated in the manner contemplated to successfully provide the intended result. In determining that question we must consider all the evidence, including not only that pointing to successful operation of Exhibit 5 relied on by Wolter, but also the statements in the testimony which point out unfavorable aspects of the test results.
The most specific testimony on the test results was given by the inventor Wolter, who was a division manager at Sunbeam and Ernstberger’s immediate superior. He testified:
Q. 150. After this one [Exhibit 5] was completed, what happened then? A. It was tested and, primarily in our laboratory, and found a few objections to the methodology of • the design, and as is usually the case, we finished the test work and designed the next subsequent one which was this one [Exhibit 45].
Q158. I believe you testified you used Exhibit 5. A. Yes.
Q159. Were you satisfied with its operation? A. Not entirely. Do you want me to go into detail on it?
Q160. If you can remember something that you thought. A. Well, functionally it seemed to work fairly well. We were not entirely satisfied with our water separation as I recall in this unit. We were not satisfied with the hose arrangement. We had developed a hose within a hose. The problem of separating dirty water from clean, and the problem of separating foam from the air was not entirely satisfactory in that unit.
RDQ3. Did you use Exhibit No. 5? A. Yes.
RDQ4. Did it pick up water? A. Yes.
RDQ5. Did it scrub? A. Yes.
RDQ6. When it picked up water, what kind of floor was left after the water pick-up sequence or operation? A. We were striving for an absolutely dry floor as our goal and we were getting some streaking. So far as the nozzles were concerned, I believe that was our only complaint. We were trying to do a pure job on the floor. In the area of the water separation, *260the problem of being sure we were separating the water from the air was the major problem.
Ernstberger was less specific. His evidence included a written statement that the scrubber “did everything expected” and testimony that the testing of Exhibit 5 “showed us our ideas were feasible and workable.”
Ritter stated that he scrubbed floors with the unit and that it “worked very well.” However, he did not specify that the machine deposited cleaning fluid, deposited rinse water, and picked up the rinse water or explain details of what he regarded as working “very well.”
As to corroborating testimony, both Clowers, who prepared drawings for Exhibits 5 and 45, and Jepson, who had charge of research and development, were generally favorable in their comments as far as they went. Clowers testified that the machine deposited water, scrubbed and sucked up water, but made no comment whether the floor was clean or dirty before and after the operation or ended up in a dry condition. Jepson’s testimony includes the following with respect to his operation of Exhibit 5:
Q30. Did you think it did a good job of scrubbing the floor and picking up water? A. Well, it did a good job so far as I can recall, but I know there was quite a few little details that I thought should be improved on, but in general I thought the principle was sound.
The testimony of Hegerieh, a sales manager for Sunbeam, relates to a letter dated March 8, 1961 in which he stated he had watched a demonstration of a floor polisher-scrubber which “ * * performed beautifully” and in which the “dispensing, scrubbing, etc. was deluxe in every respect.” While he did not amplify those statements in his testimony or describe the conditions of operation, he did state that he believed the machine referred to was Exhibit 5.
The most important remaining evidence is the test report identified as Exhibit 157. That report relates to tests Ernstberger requested the Sunbeam testing laboratory to make of a General Electric floor scrubber, a Hoover floor scrubber and the Sunbeam machine in evidence as Exhibit 5. The manager of the laboratory, Neben, testified that the test work covered by the exhibit was done by Spano and Heider with the entries in the report made by Spano. Neben testified that he assigned the work and read and approved the results of the tests, but did not state that he actually observed the tests. While there is a controversy as to the status of this report under the Federal Shop Book Rule, 28 U.S.C. § 1732, we will treat it for present purposes in the light urged by Wolter as evidencing that tests were carried out with the results reported representing the experimenters’ findings.5 The report describes the cleaning ability of all three units tested as good from a visual viewpoint, stating further:
Visually the floors looked identical and clean. A glossmeter was used to further evaluate the cleaning ability of the subject floor scrubbers. In using the glossmeter, it was found that the Hoover and Gen. Elect, units came out a little better than the Sunbeam unit. All units left streaks of a dirty residue. The streaking effect of the Sunbeam unit was greater than the Hoover and G. E. This could be due to the curved nozzle which cocks when the unit is moved.
It was found that the Sunbeam unit dried the floor better than the Hoover and Gen. Elect, because of its squeegee action.
*261Referring specifically to the Sunbeam machine (Exhibit 5), the report added:
The floor looked clean except for a few streaks visible. The blot test showed the floor to be clean except where streaks occurred.
The unit is easy to handle except at times it has a tendency to pull away.
Water pickup performance is better on the forward, stroke with only slight streaking. Maximum streaking occurs on the back stroke. Although after having picked up water or scrubbing solution from the floor, when unit is turned off there occurs spill-back through the rear squeegee. This spill-back when having picked up dirty scrub water causes the clean rinse water applied to the floor to become dirty and is responsible for pronouncing the streaks left after rinsing. [Emphasis supplied.]
Considering in its entirety the evidence regarding the tests of Exhibit 5, we, like the board, are not satisfied that the machine responded to the tests in such manner as to demonstrate beyond a reasonable doubt that its operation amounted to a successful reduction to practice. Thus the inventor Wolter was not entirely satisfied with the hose arrangement or the separation of dirty water from clean. Also he did not regard the separation of foam from air to be entirely satisfactory and he complained of streaking, making reference to the nozzles.
The report of Exhibit 157 tends to confirm the difficulties observed by Wolter. In particular, the statements therein that there was a streaking problem which “could be due to the curved nozzle” or squeegees, and that spillback of dirty water through the rear squeegee which was responsible for “pronouncing the streaks left after rinsing” indicate a performance problem which brings into serious question the successful operation of the invention.
The doubts raised as to the performance of Exhibit 5 are significant since Sunbeam subsequently commenced assembly of Exhibit 45 designed to correct the deficiencies in Exhibit 5. Thus the Exhibit 45 machine was provided with straight squeegees for removing the water from the floor. Also the “hose within a hose” arrangement for sucking the water through the squeegees and then carrying air separated from the water back to the fan was eliminated in favor of two separate hoses with a different air-water separator structure comprising a plurality of baffles therebetween.6 The changes embodied in the Exhibit 45 machine thus appear to have been directed to seeking a cure for the very problems and shortcomings which the tests revealed in Exhibit 5.
Since Wolter so frames the issue in his brief as to exclude reliance on the Exhibit 45 machine itself for reduction to practice, as we have already noted, the tests of that machine need not be analyzed. Moreover, the record shows that those tests took place after Belicka’s filing date and Wolter does not point out how his evidence might prove diligence throughout the critical period beginning just prior to that filing date.
In our consideration here, we have not overlooked the evidence favorable to Wolter’s position that the results of the tests of Exhibit 5 show satisfactory operation amounting to a reduction to practice. However, that favorable evidence is largely in terms 'of generalities and conclusions. In our opinion, the more specific evidence of dissatisfaction with identified phases of the operation outweighs that favorable evidence, at least to the extent of raising what we are satisfied is reasonable doubt that Exhibit 5 was reduced to practice. As noted at the outset, it is the heavy burden of proving his case *262beyond a reasonable doubt that Wolter must meet.
We have also considered Sherman v. Hope, 161 F.2d 263, 34 CCPA 980 (1947), cited by Wolter. That case does indicate that a party might be expected to challenge testimony that a device operated “successfully” by way of cross-examination where there is no reason in the record to believe that the device did not perform properly. However, we are not convinced that any implication adverse to Belicka should be attached to the absence of more detailed cross-examination of Wolter’s witnesses in the present case where the distinct possibility of less than successful operation of Exhibit 5 is clearly revealed in the direct testimony, and the burden of proof on Wolter is beyond a reasonable doubt.
The decision is affirmed.
Affirmed.
Judge SMITH participated in the hearing of this case but died before a decision was reached.. The burden of proof is beyond a reasonable doubt because the Wolter application, in which the counts were copied from the Belicka patent, was filed August 3, 1964, which is subsequent to the August 27, 1963 issue date of said patent. See Conner v. Joris, 241 F.2d 944, 44 COPA 772 (1957).
. The Belicka patent was owned by Electrolux Corporation during proceedings in the Patent Office, but has since been assigned to Consolidated Poods Corporation.
. It does not appear from the record and briefs that Belicka raises any question of Exhibit 5 failing to meet all the counts. At oral argument, however, counsel for Belicka seemed to question whether rcfences to a “cleaning liquid tank” and “rinse water” tank in claim 2 and refence to a wax reservoir and means for conveying wax to the floor in count 6 *258found compliance in Exhibit 5. In the view we take of the case, further treatment of those assertions becomes unnecessary.
. The retracted statement appears as a footnote in the brief reading:
While there is no contention here that Exhibit 157 itself constitutes proof that the tests there reported were sufficient to establish reduction to practice of Exhibit 5, this exhibit was positively identified as to date and authenticity by the witness Neben (R. 450-453) and establishes and corroborates the date or dates upon which Exhibit 5 was tested.
. Apparently as a consequence of Wolter’s last minute reversal of the position taken in his brief regarding the significance of Exhibit 157, as discussed previously, neither party has provided such full argument or citation of authority on the question of the applicability of the Federal Shop Book Bule as we would wish. For that reason, and because the result we reach makes it unnecessary to do so, we do not specifically decide that point.
. The significance of the modified elements to the invention in issue is apparent from reference to elements (g), (i), (j) and (k) of count 1 as set out earlier in this opinion,