Slip Op. 09-95
UNITED STATES COURT OF INTERNATIONAL TRADE
BOND STREET, LTD., :
Plaintiff, :
v. :
UNITED STATES, :
Defendant, : Court No. 08-00049
and :
GLEASON INDUSTRIAL PRODUCTS, INC. :
and PRECISION PRODUCTS, INC.,
:
Defendant-Intervenors.
[Granting Plaintiff’s motion for judgment on the agency record, and remanding scope ruling
concerning antidumping order on hand trucks from the People’s Republic of China]
Dated: September 8, 2009
Fitch, King and Caffentzis (James Caffentzis), for Plaintiff.
Tony West, Assistant Attorney General; Jeanne E. Davidson, Director, and Patricia M.
McCarthy, Assistant Director, Commercial Litigation Branch, Civil Division, U.S. Department of
Justice (Stephen C. Tosini and Courtney E. Sheehan); Irene H. Chen, Office of the Chief Counsel
for Import Administration, U.S. Department of Commerce, Of Counsel; for Defendant.
Crowell & Moring, LLP (Matthew P. Jaffe), for Defendant-Intervenors.
OPINION
RIDGWAY, Judge:
In this action, Plaintiff Bond Street, Ltd. – a New York importer of business and travel
products – contests the U.S. Department of Commerce’s determination that Bond Street’s Stebco
Court No. 08-00049 Page 2
Portable Slide-Flat Cart (style no. 390009 CHR) (“Stebco cart”) is within the scope of the
antidumping duty order on hand trucks from the People’s Republic of China (“PRC”). See Hand
Trucks and Certain Parts Thereof from the People’s Republic of China: Scope Ruling on Stebco
Portable Slide-Flat Cart, Inv. No. A-570-891 (May 30, 2007) (“Scope Ruling”).
Pending before the Court is Plaintiff’s Motion for Judgment on the Agency Record, in which
Bond Street urges that Commerce’s Scope Ruling be vacated. Bond Street emphasizes that the
antidumping order at issue requires that the projecting edge or toe plate of subject merchandise
“slide[] under a load for purposes of lifting and/or moving the load,” and asserts that its Stebco cart
is not capable of sliding under a load in such a manner. Bond Street contends that Commerce
therefore should have reached a negative scope determination. See generally Memorandum in
Support of Bond Street Ltd.’s Motion for Judgment on the Agency Record (“Pl.’s Brief”); Plaintiff,
Bond Street Ltd.’s Reply to Defendant and Defendant-Intervenors’ Responses (“Pl.’s Reply Brief”).
Bond Street’s motion is opposed by the Government and by Gleason Industrial Products,
Inc., and Precision Products, Inc. (collectively, “Domestic Manufacturers”), who maintain that
Commerce’s Scope Ruling is supported by substantial evidence and otherwise in accordance with
law, and thus should be sustained. See generally Response to Bond Street’s Motion for Judgment
Upon the Administrative Record (“Def.’s Brief”); Defendant-Intervenors’ Memorandum in
Opposition to Bond Street’s Motion for Judgment Upon the Agency Record (“Def.-Ints.’ Brief”).
Jurisdiction lies under 28 U.S.C. § 1581(c) (2000).1 For the reasons set forth below, Bond
1
The instant action is Bond Street’s second challenge to the determination at issue here.
Commerce initially issued the Scope Ruling on May 30, 2007, but failed to mail a copy to Bond
Street. Bond Street’s first action seeking to contest the ruling was therefore deemed premature, and
dismissed for lack of jurisdiction without prejudice to refiling. See Bond Street, Ltd. v. United
States, 31 CIT ____, 521 F. Supp. 2d 1377 (2007).
Court No. 08-00049 Page 3
Street’s Motion for Judgment on the Agency Record is granted, and Commerce’s Scope Ruling is
remanded for reconsideration.
I. Background
In December 2004, the Department of Commerce published an antidumping duty order on
hand trucks and certain parts thereof from the PRC. See Notice of Antidumping Duty Order: Hand
Trucks and Certain Parts Thereof From the People’s Republic of China, 69 Fed. Reg. 70,122 (Dec.
2, 2004) (“Antidumping Order”). The Antidumping Order expressly defines the covered
merchandise, both in terms of specific physical characteristics and in terms of functionality:
A complete or fully assembled hand truck is a hand-propelled barrow consisting of
a vertically disposed frame having a handle or more than one handle at or near the
upper section of the vertical frame; at least two wheels at or near the lower section
of the vertical frame; and a horizontal projecting edge or edges, or toe plate,
perpendicular or angled to the vertical frame, at or near the lower section of the
vertical frame. The projecting edge or edges, or toe plate, slides under a load for
purposes of lifting and/or moving the load.
. . . . That the vertical frame, handling area, wheels, projecting edges or other parts
of the hand truck can be collapsed or folded is not a basis for exclusion of the hand
truck from the scope of the [order]. . . . Finally, that the hand truck may exhibit
physical characteristics in addition to the vertical frame, the handling area, the
projecting edges or toe plate, and the two wheels at or near the lower section of the
vertical frame, is not a basis for exclusion of the hand truck from the scope of the
[order].
Examples of names commonly used to reference hand trucks are hand truck,
convertible hand truck, appliance hand truck, cylinder hand truck, bag truck, dolly,
or hand trolley. They are typically imported under heading 8716.80.50.10 of the
Harmonized Tariff Schedule of the United States (“HTSUS”), although they may
also be imported under heading 8716.80.50.90. . . . Although the HTSUS
subheadings are provided for convenience and customs purposes, the Department’s
written description of the scope is dispositive.
Excluded from the scope are small two-wheel or four-wheel utility carts specifically
Court No. 08-00049 Page 4
designed for carrying loads like personal bags or luggage in which the frame is made
from telescoping tubular material measuring less than e inch in diameter[.]
Antidumping Order, 69 Fed. Reg. at 70,122 (emphasis added).
After the Antidumping Order issued, Bond Street sought a ruling from Commerce that the
Stebco cart is beyond the scope of the Order, and therefore not subject to antidumping duties under
that Order. See Bond Street Request for Scope Ruling (Dec. 6, 2006) (“Request for Scope Ruling”).
Bond Street contends that the Stebco cart is not a “hand truck” within the meaning of the
Antidumping Order, but – rather – a “portable luggage cart,” designed for “personal uses such as
carrying luggage, carrying personal bags, or a salesman storing the cart in his car to carry in many
samples[] or sample cases together at one time to avoid multiple trips.” See id. at 2, 4.2 Bond
Street’s Request for Scope Ruling highlighted certain physical features of the Stebco cart that,
according to Bond Street, prevent a user from “slid[ing] [the] cart under a load for purposes of lifting
and/or moving the load,” as required by the express terms of the Antidumping Order. See id. at 3.
Bond Street maintains that, as a practical matter, “items must be lifted onto the [toe] plate for
2
In its Request for Scope Ruling, Bond Street stated that the Stebco cart “is ideal for carrying
3-4 pieces of luggage or sample cases which are between 8 inches and 12 inches deep.” See Request
for Scope Ruling at 3. See also Bond Street Reply Comments (Feb. 12, 2007) at 3 (stating that
Stebco cart is “designed for personal use, be it for carrying multiple luggage pieces when entering
or exiting an airport, or personal bags or items while traveling or in the home,” and is not “designed
to move heavy equipment”).
The Request for Scope Ruling indicated that the Stebco cart, “extended[,] measures
approximately 40 inches high by 18.75 inches wide by 19 inches deep.” See Request for Scope
Ruling at 2; accord, Domestic Manufacturers Opposition (Jan. 25, 2007) at 5. The Request further
stated that the cart “collapses to . . . approximately 30 inches high by 18.75 inches wide, by 2 e
inches deep.” See Request for Scope Ruling at 2; accord, Domestic Manufacturers Opposition at
5.
According to Bond Street, the Stebco cart is properly classified under subheading
8716.80.50.20 of the HTSUS. See Request for Scope Ruling at 2.
Court No. 08-00049 Page 5
purposes of lifting and/or moving [them].” Id. at 2 (emphasis added).3
Specifically, Bond Street pointed to “the angled design of [the] toe plate combined with the
[collapsing] structure of the plate and the lack of a kick plate,” asserting that those features “make
it virtually impossible to slide [the Stebco] cart under a load for purposes of lifting and/or moving
a load, a necessary function of any hand truck.” See Request for Scope Ruling at 3. Bond Street
explained that the collapsible toe plate “is specifically designed to enable the [cart’s] wheels to fold
flat, for the [cart] to have more portability, for easy storage in a car trunk and behind a home/office
door, and for use when traveling.” Id. at 2. But the collapsibility feature also prevents the Stebco
cart’s toe plate from “slid[ing] under” a load.
In addition to the angled design and collapsibility of the toe plate, as well as the absence of
a kick plate, Bond Street also pointed to a hook located on the rear of the cart (approximately 8½
inches from the ground) that is used to secure an elastic bungee cord (the other end of which is
attached to the front of the toe plate), after the bungee cord has been pulled over the bags or other
items on the cart. See Request for Scope Ruling at 2-3 (describing location, use, and purpose of
bungee cord and hook); Bond Street Reply Comments (Feb. 12, 2007) at 2 (explaining that hook
“serv[es] as the anchor for securing luggage and personal bags” on cart).4 Bond Street emphasized
3
See also Request for Scope Ruling at 4 (stating that items must be “manually lifted” onto
the cart); Bond Street Reply Comments at 4 (explaining that cart was “designed with an intent that
objects, such as luggage, will be placed on the toe plate by hand”); Bond Street Rebuttal Comments
(May 28, 2007) at 2-3 (noting that “all items have to be lifted onto the Stebco cart”).
4
In its Request for Scope Ruling, Bond Street stated that “‘Hand Trucks’ do not normally
include bungy cords as they are not required for hand truck use. Heavy large boxes sit securely on
a hand truck as a result of their size and/or weight, and [bungy cords] are inconvenient in regular
Hand Truck usage due to the time they take to unnecessarily secure a load.” See Request for Scope
Ruling at 3.
Court No. 08-00049 Page 6
that the purpose of placing the hook so low on the back of the cart is to avoid damage to the cart by
“prevent[ing] [a user] from pushing the cart forward with his foot to obtain leverage to bring the cart
off the floor in order to lift and move a heavy load.” Request for Scope Ruling at 3; see also Bond
Street Reply Comments at 1-2 (explaining that hook’s location “serves as a deterrent to the user to
push or kick [the cart] under a load”). Bond Street explained that the cart is designed to be pulled,
and that the cart “would be damaged if pushed from the rear.” Bond Street Reply Comments at 2;
see also id. at 5 (noting that height of cart, with telescoping handle extended, is intended to allow
user to “move the [cart] without having to bend when pulling it”).5
5
Besides detailing the physical features of the Stebco cart and their effect on the cart’s ability
to “slide[] under” a load, Bond Street’s Request for Scope Ruling also addressed the expectations
of the ultimate purchaser and the ultimate use of the cart, as well as the manner in which the cart is
advertised. See Request for Scope Ruling at 3-5.
Bond Street noted, for example, that, as a practical matter, the height of the Stebco cart
prevents it from being loaded with more than two standard-size warehouse boxes (assertedly
rendering the cart of little or no “industrial or warehouse utility”), and that (due to the design of the
toe plate) the cart’s “only viable use” is to move relatively light items such as luggage and sample
cases, “which can be manually lifted onto the cart.” See Request for Scope Ruling at 3-4. Bond
Street further advised that the cart has a relatively modest load capacity of a maximum of 275
pounds, and that – in any event – the 275-pound maximum can be sustained only for limited periods,
while the “ideal load” specified by the cart’s manufacturer is 150 pounds. See Bond Street Reply
Comments at 3-5; Bond Street Rebuttal Comments at 2-3. Bond Street noted that the cart’s load-
bearing capacity is also limited by the size and composition of its wheels (which are relatively small
and made of PVC plastic, in contrast to the larger, shock-absorbent tires typical of hand trucks). See
Bond Street Reply Comments at 5; Bond Street Rebuttal Comments at 2-3.
Together with its Request for Scope Ruling, Bond Street submitted to Commerce a sample
of the Stebco cart, as well as excerpts from catalogs and print-outs of web pages featuring photos
and descriptions of various luggage carts and hand trucks. See Request for Scope Ruling at 4-6 and
Attachments; see also Audio Recording of Oral Argument at 51:22-52:19 (confirming that sample
Stebco cart is included in the Administrative Record of this action).
Court No. 08-00049 Page 7
The Domestic Manufacturers opposed Bond Street’s request, asserting that – because the
cart has “a hand-propelled barrow with a vertical frame having a handle at the upper section of the
vertical frame; two wheels at the lower section of the vertical frame; and a horizontal projecting
edge perpendicular to the vertical frame at the lower section of the vertical frame” – the Stebco cart
“meets the precise definition of the subject merchandise,” and thus falls squarely within the scope
of the Antidumping Order. See Domestic Manufacturers Opposition (Jan. 25, 2007) at 2, passim;
Domestic Manufacturers Reply (March 19, 2007) at 1-2; Domestic Manufacturers Continued
Opposition (May 21, 2007) at 1. The Domestic Manufacturers also disputed each of Bond Street’s
specific claims concerning the physical characteristics of the cart.
The Domestic Manufacturers first targeted Bond Street’s emphasis on the Stebco cart’s lack
of a kick plate. The Domestic Manufacturers argued that the absence of a kick plate “does not
remove [the Stebco cart] from the scope of the order,” because “it is not necessary for a hand truck
to exhibit a kick plate for it to be covered.” Domestic Manufacturers Opposition at 2; Domestic
Manufacturers Reply at 1-2. The Domestic Manufacturers similarly took aim at Bond Street’s
statements concerning the location of the bungee cord hook on the rear of the bottom of the cart.
Among other things, the Domestic Manufacturers suggested that a user might simply place his foot
elsewhere at the bottom of the back of the cart, for leverage to help “position [the toe plate] beneath
a load.” See Domestic Manufacturers Opposition at 3 & n.2.
As to Bond Street’s statements that the design of the toe plate prevents the Stebco cart from
“slid[ing] under a load,” the Domestic Manufacturers relied on dictionary definitions of “slide” and
“under” to argue that the Antidumping Order requires only that a toe plate “can be placed in or into
Court No. 08-00049 Page 8
a position beneath a load so the load can be slid across the toe plate’s surface.” See Domestic
Manufacturers Opposition at 2-3. The Domestic Manufacturers further asserted that “an individual
can easily position the toe plate of the [Stebco cart] beneath a load by . . . tipping the load slightly
so as to better allow the toe plate to slide under the load.” Id. at 3. The Domestic Manufacturers
accordingly urged Commerce to rule that the Stebco cart is within the scope of the Antidumping
Order. Id. at 8.6
Bond Street has stated that it “does not disagree” with the dictionary definition of “slide” that
the Domestic Manufacturers have cited. See Bond Street Reply Comments at 2.7 Indeed, Bond
Street repeatedly urged Commerce and the Domestic Manufacturers to test the sample Stebco cart,
to determine whether – in the words of the Domestic Manufacturers’ proffered dictionary definition
– the cart in fact will “go with a smooth continuous motion” under a load. See Bond Street Reply
Comments at 2 (quoting dictionary definition of “slide” on which the Domestic Manufacturers rely);
see also id. at 2-3 (suggesting test of sample Stebco cart provided to Commerce, to “demonstrate[]
6
The Domestic Manufacturers advanced two additional arguments, not directly relevant here.
First, the Domestic Manufacturers argued that the Stebco cart does not fall within the Antidumping
Order’s express exclusion of “small two-wheel or four-wheel utility carts specifically designed for
carrying loads like personal bags or luggage in which the frame is made from telescoping tubular
material measuring less than e inch in diameter.” See Domestic Manufacturers Opposition at 4-7
(quoting Antidumping Order, 69 Fed. Reg. at 70,122); Domestic Manufacturers Reply at 2;
Domestic Manufacturers Continued Opposition at 2. And, second, the Domestic Manufacturers
asserted that the Stebco cart is similar to two products that Commerce previously determined to be
within the scope of the Antidumping Order. See Domestic Manufacturers Opposition at 7-8;
Domestic Manufacturers Reply at 2; Domestic Manufacturers Continued Opposition at 2-3.
7
But see Pl.’s Brief at 12-13 (asserting that, contrary to the Domestic Manufacturers’ claims,
“slide under” does not mean “move under, or be positioned under, when lifted,” and that the
Antidumping Order’s functional requirement of a toe plate “cannot be met by a load sliding across
or onto it. The toe plate must also be able to slide under a load.”).
Court No. 08-00049 Page 9
that the toe plate cannot slide under the load”); Bond Street Rebuttal Comments (May 28, 2007) at
1-2 (detailing suggested test, and noting that Domestic Manufacturers either did not avail themselves
of opportunity to test cart when they viewed it at Commerce headquarters, or did not disclose results
of testing).8
Bond Street asserted, moreover, that “tipping the load slightly” before moving the toe plate
under the load (as the Domestic Manufacturers contemplate) would necessarily result in damage to
any bag, box, or other object at the bottom of the load, and, over time, would also damage the frame
of the cart itself. See Bond Street Reply Comments at 2-3. Even more to the point, Bond Street
stated that tilting the cart forward in an attempt to slide the toe plate under a load would cause the
wheels to collapse and the cart to begin to fold up (as if for storage), precluding the toe plate from
“slid[ing] under” the load. See Bond Street Reply Comments at 2-3; Bond Street Rebuttal
Comments at 2.
Commerce analyzed Bond Street’s Request for Scope Ruling under the framework of 19
C.F.R. § 351.225(k)(1) (2006), finding “the descriptions of the merchandise” to be dispositive. See
Scope Ruling at 8.9 Commerce determined that the Stebco cart “clearly consists” of four “requisite
8
Although the Domestic Manufacturers inspected a sample of the Stebco cart, they
apparently did not test it. Nor has Commerce done so. See Audio Recording of Oral Argument at
55:24-55:33, 1:26:45-1:26:47, 1:36:14-1:36:21, 2:02:22-2:03:10; 2:08:58-2:09:00 (counsel for
Government asserts that Commerce did not test the cart, and was not required to do so).
9
In determining whether merchandise falls within the scope of an antidumping order,
Commerce begins by examining the language of the order at issue. The “predicate for the
interpretive process is language in the order that is subject to interpretation.” Duferco Steel Inc. v.
United States, 296 F.3d 1087, 1097 (Fed. Cir. 2002). If the terms of the order alone are not
dispositive, the interpretive process is governed by 19 C.F.R. § 351.225(d), which directs Commerce
to determine whether it can make a ruling based upon the request for a scope ruling and the factors
listed in § 351.225(k)(1). See Sango Int’l, L.P. v. United States, 484 F.3d 1371 (Fed. Cir. 2007).
The three sources to be considered are “[t]he descriptions of the merchandise contained in the
Court No. 08-00049 Page 10
characteristics” of a hand truck, as established by the scope language of the Antidumping Order –
(1) a vertical frame, (2) at least one handle, (3) two or more wheels, and (4) a projecting edge or toe
plate. Id. at 8. Indeed, Commerce noted that “Bond Street does not argue that the [Stebco cart] does
not contain any of these characteristics.” Id. Commerce observed that, instead, “Bond Street argues
the Department should take into consideration the functions of the [Stebco cart] and the limitations
of its toe plate, focusing on the scope language [in the Antidumping Order] that states ‘The
projecting edge or edges, or toe plate, slides under a load for purposes of lifting and/or moving the
load.’” Id. (quoting Antidumping Order, 69 Fed. Reg. at 70,122). Commerce stated that “Bond
Street argues that the design of the collapsing toe plate, the placement of the bungy cord hook, and
the lack of a kick plate, make it impossible to slide the [Stebco cart] under a load.” Id. Although
Commerce then briefly addressed the collapsible toe plate, the location of the bungee cord hook, and
the absence of a kick plate, seriatim, the agency’s determination is silent on the ability of the toe
plate to “slide[] under a load for purposes of lifting and/or moving the load.” See generally Scope
Ruling, passim.
After further finding that the Stebco cart did not fall within the Antidumping Order’s express
exclusion of “small two-wheel or four-wheel utility carts specifically designed for carrying loads
like personal bags or luggage in which the frame is made from telescoping tubular material
petition, the initial investigation, and the determinations of [Commerce] (including prior scope
determinations) and the [International Trade] Commission.” 19 C.F.R. § 351.225(k)(1).
If the analysis outlined above is not dispositive, Commerce initiates a scope inquiry pursuant
to 19 C.F.R. § 351.225(e), and applies the five Diversified Products criteria codified in the agency’s
regulations. See 19 C.F.R. § 351.225(k)(2); Diversified Products Corp. v. United States, 6 CIT 155,
572 F. Supp. 883 (1983).
Court No. 08-00049 Page 11
measuring less than e inch in diameter,”10 Commerce concluded that Bond Street’s Stebco cart falls
within the scope of the Antidumping Order. See Scope Ruling at 8-9.
II. Analysis
Commerce’s determination in this case cannot be sustained, because the agency failed to
make a finding as to one of the defining characteristics of merchandise within the scope of the
Antidumping Order, as established by the terms of that Order – the very characteristic that Bond
Street contends the Stebco cart at issue here does not possess. Specifically, Commerce failed to
make a determination as to whether the toe plate of the Stebco cart can “slide[] under a load for
purposes of lifting and/or moving the load.” See Antidumping Order, 69 Fed. Reg. at 70,122; see
also Pl.’s Brief at 7 (noting that Scope Ruling “[g]laringly omitted” any analysis of cart’s ability to
slide under a load); Pl.’s Reply Brief at 2 (stating that the Scope Ruling’s analysis “omits the fifth
indispensable and essential element” of a “hand truck” – the ability to slide under a load).
The Government and the Domestic Manufacturers contend that the Scope Ruling must be
sustained because Commerce expressly addressed each of the physical characteristics of the Stebco
cart that Bond Street cites in arguing that the cart’s toe plate cannot “slide[] under a load.” See
generally Def.’s Brief at 6-8; Def.-Ints.’ Brief at 3-4, 6-7. The Government and the Domestic
Manufacturers point out, for example, that the Scope Ruling acknowledged the collapsibility of the
toe plate, but that Commerce determined that the collapsibility did not put the cart beyond the scope
10
Bond Street concedes that the frame of the Stebco cart includes some telescoping tubing
with a diameter greater than e inch, which Commerce determined prevented the cart from being
covered by the express exclusion in the Antidumping Order (quoted above). See Request for Scope
Ruling at 2; Scope Ruling at 8-9.
Court No. 08-00049 Page 12
of the Antidumping Order, because the Order specifically states that the fact “that . . . projecting
edges or other parts of the hand truck can be collapsed or folded is not a basis for exclusion of the
hand truck from the scope.” See Def.’s Brief at 6-8; Def.-Ints.’ Brief at 3, 6-7.
The Government and the Domestic Manufacturers further emphasize that the Scope Ruling
took note of Bond Street’s argument that the location of the bungee cord hook prevents a user from
pushing the cart forward with his foot to gain leverage in order to lift the front of the cart off the
ground, but that Commerce determined (a) that the hook’s “primary purpose” is to “secure [items
on the cart] for transport,” (b) that there was no evidence to indicate that a user could not place his
foot “at a position other than the . . . location of the hook (e.g., below the hook or against the
wheel),” and (c) that – in any event – the Antidumping Order expressly states that additional
“physical characteristics” (such as a bungee cord hook) do not exclude merchandise from the scope
of the Order. See Def.’s Brief at 6-8; Def.-Ints.’ Brief at 3, 6-7.
The Government and the Domestic Manufacturers similarly note that the Scope Ruling
considered the fact that the Stebco cart lacks a kick plate, and that Commerce concluded that the
absence of such a feature did not remove the cart from the scope of the Antidumping Order because
a kick plate “is not a required characteristic as set forth in the language . . . [defining] the scope” of
the Order. See Def.’s Brief at 6-8; Def.-Ints.’ Brief at 3, 6-7.
Contrary to the claims of the Government and the Domestic Manufacturers, however, it is
not enough that Commerce analyzed each of the referenced physical characteristics in isolation.
Bond Street has never claimed that the existence of those physical characteristics, in and of
themselves, places the Stebco cart beyond the scope of the Antidumping Order. To the contrary, the
Court No. 08-00049 Page 13
gravamen of Bond Street’s argument is that those physical characteristics prevent the Stebco cart
from having the functional or operational characteristic set forth in the Antidumping Order – that
is, that “[t]he projecting edge or edges, or toe plate, slide[] under a load.” See, e.g., Pl.’s Reply Brief
at 3-4 (asserting that “[i]t is the nature of the collapse mechanism, not the fact of its presence, that
excludes this cart from the scope of the order,” and arguing that Commerce erred in focusing on the
existence of individual “design features” of the cart “rather than its operation”), 5 (stating that
“Commerce’s analysis fails to recognize that there is a distinction between physical and operational
characteristics of hand trucks,” and that agency was obligated to determine whether Stebco cart
“possessed those operational features characteristic of the articles covered by the order, in addition
to the physical characteristics”); Antidumping Order, 69 Fed. Reg. at 70,122.
But nowhere in its Scope Ruling in this case did Commerce make a determination as to
whether the toe plate of the Stebco cart can “slide[] under a load for purposes of lifting and/or
moving” that load. Nowhere in the Scope Ruling did Commerce address Bond Street’s claim that
the collapsible toe plate, the location of the bungee cord hook, and the absence of a kick plate
prevent the toe plate of the Stebco cart from “slid[ing] under” a load. Commerce’s analysis here
thus rendered the Antidumping Order’s “slide[] under” language mere surplusage, and verged on
the disingenuous.11
11
As explained in Vertex, another case involving a request for a ruling on the scope of the
Antidumping Order at issue here:
The Order defines “projecting edge or toe plate” according to its function.
Specifically, it states that “[t]he projecting edge or edges, or toe plate, slides under
a load for purposes of lifting and/or moving the load.” . . . Although Commerce
specified that a hand truck may be “suitable for any use,” the “any use” language is
limited by this sentence [in the Antidumping Order] which requires that a hand
truck’s toe plate slide under a load to lift or move it. Commerce must give effect to
Court No. 08-00049 Page 14
At oral argument, the Domestic Manufacturers (and, to some extent, the Government) sought
to excuse the Scope Ruling as inartfully drafted, asserting that Commerce at least implicitly found
that the Stebco cart was capable of “slid[ing] under” a load. The Domestic Manufacturers argued,
in essence, that “[a] court may ‘uphold [an agency’s] decision of less than ideal clarity if the
agency’s path may reasonably be discerned.’” Ceramica Regiomontana, S.A. v. United States, 810
F.2d 1137, 1139 (Fed. Cir. 1987) (quoting Bowman Transp., Inc. v. Arkansas-Best Freight Sys., Inc.,
419 U.S. 281, 286 (1974); Colorado Interstate Gas Co. v. Federal Power Comm’n, 324 U.S. 581,
595 (1945)); see, e.g., Audio Recording of Oral Argument at 1:29:29-1:29:40, 2:15:56-2:16:08,
2:40:10-2:40:49, 2:50:03-2:50:13, 2:56:19-2:57:24; see also Def.-Ints.’ Brief at 8. But, contrary to
the Domestic Manufacturers’ assertions, the Scope Ruling here does not suffer from a lack of clarity.
In fact, the Scope Ruling is crystal clear. It simply ignores the substance of Bond Street’s claim.12
this sentence, which states an essential physical characteristic of the articles
included within the scope and specifies the purpose for which the horizontal
projecting edge or toe plate must be designed.
Vertex Int’l, Inc. v. United States, 30 CIT 73, 79 (2006) (emphases added).
12
Commerce’s instructions concerning the suspension of liquidation confirm that the Scope
Ruling focused solely on the physical characteristics of the Stebco cart, without regard to the cart’s
functional or operational ability to “slide[] under” a load. Summarizing the Scope Ruling, those
instructions state: “Because the [Stebco cart] consists of a vertical frame, a handle, two wheels, and
a projecting edge or toe plate, . . . and because the imported product does not fall within the
exclusionary language of the scope, the Commerce Department found this product to be within the
scope of the [Antidumping Order].” See Instructions re: Suspension of Liquidation (June 14, 2007).
Moreover, the language of the Scope Ruling itself belies any suggestion that Commerce
somehow did not grasp the nature of Bond Street’s argument. As noted elsewhere above, the Scope
Ruling accurately characterized Bond Street’s argument as focusing on the functional or operational
requirement embodied in the Antidumping Order – the requirement that the toe plate be capable of
“slid[ing] under” a load. Commerce wrote:
Bond Street does not argue that the . . . cart does not contain any of [the physical]
Court No. 08-00049 Page 15
Because Commerce here failed to make a finding as to whether the Stebco cart’s toe plate
“slides under a load for purposes of lifting and/or moving the load,” Commerce’s Scope Ruling
cannot be sustained. This matter therefore must be remanded to the agency for further action.13
characteristics [specified in the Antidumping Order]. Rather, Bond Street argues the
Department should take into consideration the functions of the . . . cart and the
limitations of its toe plate, focusing on the scope language that states “The projecting
edge or edges, or toe plate, slides under a load for purposes of lifting and/or moving
the load.” Bond Street argues that the design of the collapsing toe plate, the
placement of the bungy cord hook, and the lack of a kick plate[] make it impossible
to slide the . . . cart under a load.
Scope Ruling at 8.
In any event, even if the Scope Ruling were to be construed as having (implicitly) found that
the toe plate of the Stebco cart is capable of “slid[ing] under” a load, any such determination would
be vulnerable to attack on the grounds that it is not supported by substantial evidence in the record.
There is little or no evidence in the existing record to indicate that the toe plate of the Stebco cart
can “slide[] under a load for purposes of lifting and/or moving the load.” See generally, e.g., Audio
Recording of Oral Argument at 1:34:43-1:35:13, 1:54:36-1:55:00, 2:08:30-2:08:42, 2:40:52-2:47:58.
13
This result obviates any need to here address the merits of the Domestic Manufacturers’
claim that a cart falls within the scope of the Antidumping Order even if the cart’s toe plate slides
under a load only if that load has been “tilted” or “tipped.” See, e.g., Def.-Ints.’ Brief at 4, 11-12;
but see Pl.’s Brief at 11-14; see also Audio Recording of Oral Argument at 1:47:47-1:48:00
(acknowledging that Scope Ruling did not consider “tilting” or “tipping” of load).
There is similarly no need to here reach the Domestic Manufacturers’ related claim that the
scope of the Antidumping Order requires only that it be possible to slide a cart’s toe plate under a
load – that is, that the Order does not require that the toe plate slide under the load with any degree
of ease. See, e.g., Def.-Ints.’ Brief at 4, 6; but see Pl.’s Brief at 9-10 (discussing Vertex, 30 CIT at
76, where the Domestic Manufacturers agreed that the projecting plate of the cart there at issue did
not “readily ‘slide under’ a load” and was thus beyond the scope of the Antidumping Order).
Court No. 08-00049 Page 16
III. Conclusion
For all the reasons set forth above, Plaintiff’s Motion for Judgment on the Agency Record
must be granted, and this matter remanded to the Department of Commerce for further action not
inconsistent with this opinion.
A separate order will enter accordingly.
/s/ Delissa A. Ridgway
___________________________________
Delissa A. Ridgway
Judge
Dated: September 8, 2009
New York, New York