[DO NOT PUBLISH]
IN THE UNITED STATES COURT OF APPEALS
FOR THE ELEVENTH CIRCUIT
FILED
_____________ U.S. COURT OF APPEALS
ELEVENTH CIRCUIT
JULY 26, 2011
No. 10-13162
_____________ JOHN LEY
CLERK
D.C. Docket No. 3:08-cv-00037-TJC-TEM
ADAM B. BEAUREGARD,
as personal representative of the Estate of
Sarah Dawn Beauregard,
Plaintiff-Appellant,
versus
CONTINENTAL TIRE NORTH AMERICA, INC.
a foreign corporation,
Defendant-Appellee.
____________
Appeal from the United States District Court
for the Middle District of Florida
____________
(July 26, 2011)
Before DUBINA, Chief Judge, HILL and EBEL,* Circuit Judges.
*
Honorable David M. Ebel, United States Circuit Judge for the Tenth Circuit, sitting by
designation.
HILL, Circuit Judge:
Adam B. Beauregard, as the personal representative of Sarah Dawn
Beauregard’s estate, brought this wrongful death action against Continental Tire
North America, Inc. (“Continental”) under the district court’s diversity
jurisdiction. Beauregard alleged that Continental was negligent in the design,
manufacture, testing, marketing, and/or selling of a tire that “experienced a
catastrophic tread and belt separation” resulting in an accident in which Sarah
Dawn Beauregard was ejected from the vehicle on which the tire was mounted and
was killed.
Continental filed a motion for summary judgment, asserting that Beauregard
had not created a triable issue of fact with respect to the alleged defect in the tire.
After a hearing, the district court agreed and granted summary judgment for
Continental. Beauregard filed a motion to alter or amend the judgment, but the
district court reaffirmed its prior holding. We agree.
I.
The following facts are undisputed. Continental manufactured the allegedly
defective tire in 1994, some eleven years and seven months before the accident.
The tire’s ownership, maintenance, use and storage history are largely unknown
2
for the ten-year period between its manufacture and its purchase by decedent’s
father. The decedent’s father purchased the tire and three others, which were lying
in a neighbor’s Florida yard, in 2004 or 2005. He mounted the tires on his Jeep
even though Jeep recommends installation of smaller size tires. He modified the
Jeep to accommodate the larger tires by installing after-market “lift kits” that raise
the body off the frame. Experts who examined the tire following the accident
found evidence of a previous puncture in the tire; evidence that it had “bead”
damage, possibly from having been mounted and remounted on different rims; and
evidence of improper inflation (though the experts disagreed as to whether the tire
had a history of being overinflated or under inflated).1
II.
To prevail on his claim, Beauregard must first demonstrate the existence of
a design or manufacturing defect present in the tire when it left Continental’s
manufacturing plant. See West v. Caterpillar Tractor Co., Inc., 336 So. 2d 80, 86
(Fla. 1976). The only evidence Beauregard offered in this regard was the opinion
of his tire failure expert. The district court held this testimony insufficient as a
1
As to the accident itself, the facts are in dispute. The parties do not agree on whether the
decedent’s father hit something causing the tire tread to separate, whether the modifications he
made to the Jeep caused him to be unable to steer following the tread separation, whether a piece
of the tire tread hit or became lodged in the underside of the vehicle, and whether the decedent
was properly fastened by her seatbelt.
3
matter of law to create a triable issue of fact as to the existence of such a defect.
We agree.
Plaintiff’s tire failure expert was Robert C. Ochs, who the district court
found to be a well-qualified tire engineer who worked for Michelin Tire
Corporation for twenty-five years before becoming a consulting engineer. Ochs
examined the tire, prepared a Rule 26(a)(2)(B) expert report and gave a deposition
in this case. He concluded that the tire failed when the upper and lower belts
separated. In his deposition, however, he testified that “the mere fact that a tire
sustained a tread belt separation in and of itself does not mean that [the] tire was
defectively designed or manufactured.”
As to the tire’s design, Ochs testified that he had “no opinions” as to the
tire’s design because he had not been furnished with sufficient documentation to
form such an opinion. Nonetheless, he speculated that the tire’s design might be
defective as the result of the presence of two short sections of cord or string that
he found between the upper and lower belts of the tire. He thought that these
cords might have introduced stress on the belts. He conceded, however, that
neither of these cords was in the specific area of the tire where he determined the
4
belts separated.2 Furthermore, he conducted no tests to support his speculation
that the cords might have caused stress on the belts.3
The district court held that this evidence was insufficient as a matter of law
to create a triable issue of fact as to the presence of a design defect in the tire, and
we agree.
As to the issue of a manufacturing defect, Ochs testified that belt separation
is a “fatigue failure” that could be caused by using aged chemical compounds to
create the belts, improper bonding between the belts, and/or from contamination
that would cause a stress riser between the belts. When questioned, however, he
admitted that he had no information as to the chemical compounds used to create
the belts. He admitted that “all tires experience some loss of adhesion during their
lifetime” and estimated the tire had between 30,000 and 40,000 miles on it at the
time of the accident.
As to improper bonding, Ochs testified that the tire had “liner pattern
marks” on it, which are evidence of manufacturing defects. He admitted, however,
that the marks were not at the point of tread separation on the tire and that he had
2
The district court carefully examined this testimony in great detail, which we do not
repeat here. We agree with its observations and conclusions. See Order, Docket # 106, ¶. 7-10.
3
Continental’s expert, who is familiar with the design process for this tire, testified that
there is no defect in its design.
5
no evidence to support his opinion that such marks had probably been there prior
to the accident. Furthermore, where there were such liner marks, there was no
tread separation on the tire.4
The district court held that this opinion was predicated on “impermissible
speculation and conjecture” and was, therefore, insufficient as a matter of law to
create a triable issue of fact regarding the existence of a manufacturing defect in
the tire. We agree.
Finally, Beauregard relies on Cassisi v. Maytag Co., 396 So. 2d 1140 (Fla.
1st DCA 1981), to argue that he is entitled under Florida law to an inference of
design or manufacturing defect under the circumstances of this case even if his
expert’s opinion does not raise such an inference. Under Cassisi, an inference of
defect is permissible when the plaintiff can prove a malfunction that occurs during
normal operation of the product. Id. at 1151. We have explained that where a
“product malfunctions that would not malfunction but for the defect,” a plaintiff is
entitled to such an inference. Horsham v. A.H. Robins Co., 734 F.2d 676, 683
(11th Cir. 1984). The Cassisi inference has been used to permit a defect claim to
go to the jury in tire failure cases. See, e.g., Derosier v. Cooper Tire & Rubber
4
The district court’s complete examination of this testimony can be found at Order,
Docket # 106, pp. 10-11.
6
Co., 819 So. 2d 143 (Fla. 4th DCA 2002).
The district court rejected this argument, however, because Beauregard was
unable to adduce sufficient evidence that there was a “malfunction” or that, if
there was, that it occurred during “normal operation” of the tire. See Cassisi, 396
So. 2d at 1151. While Ochs testified that absent evidence of impact damage or
signs of under inflation, a tread belt detachment “would be the result of a problem
in the tire itself [meaning] a manufacturing or design defect,” he admitted that
such a detachment could be the result of abuse of the tire, such as improper storage
conditions and exposure to extreme temperatures.
The undisputed evidence in this case is that the tire was eleven years and
seven months old at the time of the accident; it had between 30,000 and 40,000
miles on it; the first ten years’ ownership and maintenance history for the tire is
unknown; the storage history for the tire is unavailable other than that it was lying
outside in a Florida yard when purchased; it showed signs that might indicate
excessive heat exposure; it showed some signs of improper inflation and rim
mounting that can affect durability; it was not the right size for the vehicle to
which it was mounted; it had been punctured previously; and Continental had not
been advised of any problem with any other tires of this model that it
manufactured. In view of this undisputed evidence, the district court held that
7
Beauregard did not show a malfunction during normal operation of the tire and,
therefore, was not entitled to a Cassisi inference of defect.5 We agree.
III.
The facts of this case are tragic, indeed. But we agree with the district court
that Beauregard has failed to adduce sufficient evidence of a design or
manufacturing defect in Continental’s tire to permit this case and its related claims
to go forward. Accordingly, the judgment of the district court is
AFFIRMED.
5
See Order, Docket # 106, pp. 22 for its exhaustive discussion of the evidence that might
support a Cassisi inference, but did not.
8