Meridian Products, LLC v. United States

Slip Op. 14 - 32

UNITED STATES COURT OF INTERNATIONAL TRADE

:
MERIDIAN PRODUCTS, LLC, :
:
Plaintiff, :
:
v. : Before: R. Kenton Musgrave, Senior Judge
: Court No. 13-00018
UNITED STATES, :
:
Defendant. :
:
:

OPINION AND ORDER

[Remanding first results of remand of anti-dumping and countervailing duty orders on aluminum
extrusions from the People's Republic of China.]

Dated: March 26, 2014

Daniel Cannistra and Richard P. Massony, Attorneys, Crowell & Moring LLP, of
Washington DC, for the plaintiff.

Tara K. Hogan, Senior Trial Counsel, Commercial Litigation Branch, Civil Division, U.S.
Department of Justice, of Washington DC, for the defendant. On the brief were Stuart F. Delery,
Assistant Attorney General, Jeanne E. Davidson, Director, and Reginald T. Blades, Jr., Assistant
Director. Of counsel on the brief was Joanna Theiss, Attorney, Office of the Chief Counsel for
Import Administration, U.S. Department of Commerce, of Washington DC.

Musgrave, Senior Judge: The plaintiff Meridian Products LLC, a U.S. importer of

refrigerator/freezer trim kits (“Trim Kits”), challenges the Final Results of the Redetermination

Pursuant to Court Remand, Meridian Products, LLC v. United States, Ct. No. 13-00018 (Aug. 15,

2013) of the International Trade Administration of the U.S. Department of Commerce

(“Commerce”). See Meridian Products, LLC v. United States, Court No. 13-00018, Slip Op. 13-75
Court No. 13-00018 Page 2

(2013) (“Opinion”). In the Opinion, the court ordered Commerce to reconsider the Trim Kits under

the finished goods scope exclusion of the anti-dumping and countervailing duty orders (“Orders”)

on aluminum extrusions from the People’s Republic of China,1 as applied in the Valves Ruling, Auto

Parts Remand and Drapery Rail Kits Remand.2

The plaintiff now moves for a second remand of this action, claiming that Commerce

failed to apply the “revised test for finished goods” to the Trim Kits and that Commerce’s remand

analysis of the Trim Kits was unlawful. Plaintiff’s Comments in Response to Redetermination upon

Remand (“Pl’s Comm. in Resp.”) at 1, 10-11. Commerce asks the court to affirm the results of the

remand, arguing that it complied with the court’s orders in the Opinion and that its remand

determination is both supported by substantial evidence and otherwise in accordance with law.

Defendant’s Response to Comments Regarding the Remand Redetermination (“Def’s Reply to

Comm.”) at 2, 14.

1
See Aluminum Extrusions from the People’s Republic of China: Antidumping Duty Order,
76 Fed. Reg. 30650 (May 26, 2011) (“AD Order”) & Aluminum Extrusions from the People’s
Republic of China: Countervailing Duty Order, 76 Fed. Reg. 30653 (May 26, 2011) (“CVD Order”)
(collectively, “the Orders”).
2
Opinion at 4, referencing Memorandum to Christian Marsh, “Initiation and Preliminary
Scope Ruling on Side Mount Valve Controls” (Sep. 24, 2012), aff’d, Final Scope Ruling on Side
Mount Valve Controls (Oct. 26, 2012) (“Valves Ruling”); Final Results of Redetermination Pursuant
to Court Remand, Rowley Co. v. United States, Ct. No. 12-00055 (Feb. 28, 2013) (“Drapery Rail
Kits Remand”); Final Results of Redetermination Pursuant to Court Remand Aluminum Extrusions
from the People’s Republic of China, Valeo, Inc., Valeo Engine Cooling Inc., and Valeo Control
Corp. v. United States, Ct. No. 12-00381 (Feb. 13, 2013) (“Auto Parts Remand”).
Court No. 13-00018 Page 3

Upon review of the remand results, the court finds that although Commerce

reasonably defined the “finished goods kit” exclusion methodology, as applied in the Drapery Rail

Kits Remand and Solar Panel Mounting Ruling3, its conclusion that the Trim Kits do not qualify as

goods intended to “display customizable materials” or “work with removable/replaceable parts” and

do not merit application of the methodology from the rulings is not supported by substantial

evidence. The court remands to Commerce to evaluate the Trim Kits under the revised finished

goods exclusion methodology announced in the Drapery Rail Kits Remand and Solar Panel

Mounting Ruling.

I. Background

A. Scope Ruling on Trim Kits

Commerce published the Orders that covered “[a]luminum extrusions which are

shapes and forms, produced by an extrusion process, made from aluminum alloys . . .”. The Orders

contain an exclusion for otherwise subject merchandise that is considered “finished merchandise”

or a “finished goods kit.” That exclusion is as follows:

The scope also excludes certain finished merchandise containing aluminum
extrusions as parts that are fully and permanently assembled and completed at the
time of entry, such as finished windows with glass, doors with glass or vinyl, picture
frames with glass pane and backing material, and solar panels. The scope also
excludes finished goods containing aluminum extrusions that are entered
unassembled in a “finished goods kit.” A finished goods kit is understood to mean a
packaged combination of parts that contains, at the time of importation, all of the
necessary parts to fully assemble a final finished good and requires no further
processing or fabrication, such as cutting or punching, and is assembled ‘as is’ into
a finished product.

3
Memorandum to Christian Marsh, Deputy Assistant Secretary for Antidumping and
Countervailing Duty Operations, “Final Scope Ruling on Clenergy (Xiamen) Technology’s Solar
Panel Mounting Systems” (Oct. 31, 2012) (“Solar Panel Mounting Ruling”).
Court No. 13-00018 Page 4

76 Fed. Reg. at 30651 and 30654 (italics added).

The scope language also clarifies that an imported product

[w]ill not be considered a “finished goods kit” and therefore excluded from the scope
of the investigation merely by including fasteners such as screws, bolts, etc. in the
packaging with an aluminum extrusion product.

Id. (italics added). The plaintiff requested a scope ruling4 on its Trim Kits, which it describes as

consist[ing] of three different styles of complete aluminum trim kit packages which
are utilized as an aesthetic frame around the perimeter of (though not attached to) a
major home kitchen appliance. Trim kits enhance the appearance of the cabinetry
surrounding the appliance in the consumer’s home and lends a customized, “built-in”
look. The major appliance units for which the trim packages apply are stand alone
freezers, stand alone refrigerators and freezer plus refrigerators.

Trim kits are sold as a package of finished parts which when assembled will make
up a customized frame to fit around a single freezer unit or a single refrigerator unit.
Each trim kit consists of extruded aluminum forms, made from aluminum alloy
having elements corresponding to the alloy series designation published by the
Aluminum Association commencing with the number 6. Trim kits include a
customer installation kit, consisting of a hexagonal wrench and fasteners used by the
user during assembly. A set of instructions written in English, Spanish, and French
is also included in the installation kit.

See Complaint at ¶¶ 20-21.5

4
See Letter from Daniel Cannistra, Crowell & Moring LLP, to the Secretary of Commerce,
Antidumping and Countervailing Duty Orders on Aluminum Extrusions from the People’s Republic
of China: Request for Scope Ruling for Refrigerator/Freezer Trim Kits (Nov. 13, 2012) (“Scope
Ruling Request”).
5
See also Memorandum to Christian Marsh, Deputy Assistant Secretary for Antidumping
and Countervailing Duty Operations, through Melissa G. Skinner, Director, Office 8, Operations,
from Eric B. Greynolds, Program Manager, and John Conniff, Senior Trade Analyst, “Final Scope
Ruling on Refrigerator, Freezer Trim Kits” (Dec. 18, 2102) (“Scope Ruling”) at 2. Meridian
emphasizes that the products at issue enter the United States under the Harmonized Tariff Schedule
of the United States, subheading 8418.99.8060, which provides for other parts for refrigerators,
freezers and other refrigerating or freezing equipment.
Court No. 13-00018 Page 5

In the Scope Ruling Request, the plaintiff argued that Commerce should find that its

Trim Kits were excluded from the scope of the Orders as “finished goods kits.” Id. ¶ 22, referencing

Scope Ruling Request.

In its final scope determination, Commerce rejected the plaintiff’s arguments and

found that the Trim Kits were unambiguously included in the scope of the Orders as subject

aluminum extrusions identified by reference to their end use.6 Commerce concluded that the Trim

Kits are like the geodesic dome frame kits in a previous ruling7 and met the initial requirements for

the finished good kits exclusion, but it also found that the Trim Kits consisted entirely of aluminum

extrusions, fasteners, and extraneous materials and accordingly did not qualify for the exclusion.8

B. Remand Request and Results

The plaintiff challenged Commerce’s Scope Ruling before this court, and moved for

immediate remand pursuant to USCIT Rule 7, arguing that

Commerce has admittedly changed the way it determines whether a product qualifies
for the finished goods exclusion. This change is explicitly stated in Commerce’s
final scope ruling on side mount valve controls . . . , and it is also apparent in
Commerce’s redetermination regarding drapery rail kits.

6
Scope Ruling at 3, 9-11, see Orders, which provide that “[s]ubject extrusions may be
identified with reference to their end use, such as fence posts, electrical conduits, door thresholds,
carpet trim, or heat sinks (that do not meet the finished heat sink exclusionary language below). Such
goods are subject merchandise if they otherwise meet the scope definition, regardless of whether they
are ready for use at the time of importation”.
7
See Memorandum to Christian Marsh, Deputy Assistant Secretary for Antidumping and
Countervailing Duty Operations, “Final Scope Ruling on J.A. Hancock, Inc.’s Geodesic Structures”
(July 17, 2012) (“Geodesic Domes Scope Ruling”).
8
Scope Ruling at 5, citing Geodesic Domes Scope Ruling at 7. See also id. at 11, citing the
scope of the Orders.
Court No. 13-00018 Page 6

Plaintiff’s Motion for Remand (Mar. 12, 2013) (“Pl’s Mot. for Remand”) at 1, referencing Valves

Ruling, Drapery Rail Kits Remand. See Opinion at 2-3. Commerce opposed the motion as

premature, lacking ground for deviation from USCIT Rule 56.2 procedure, and substantively failing

the plaintiff’s obligation to exhaust administrative remedy. At the time, however, since the issue

simply seemed to involve proper, legal administrative interpretation of the scope issue and no third-

party interests,9 and USCIT Rule 1 requires the “just, speedy, and inexpensive determination of every

action and proceeding”, the court granted the plaintiff’s motion and ordered Commerce on remand

to “reopen the record and permit the plaintiff to submit arguments . . . as to why the trim kits satisfy

the finished goods exclusion under the Valves Ruling and the remands in the Drapery Rail Kits and

Auto Parts cases”.10

On remand, Commerce determined that the “revised” finished goods exclusion

analysis from the three referenced rulings was not applicable to the Trim Kits because they are not

analogous to the goods considered in those rulings.11 Commerce continued to find that the Trim Kits

are included in the scope of the Orders as subject aluminum extrusions identified by reference to

their end use, and that they did not qualify under the finished goods exclusion.12

9
Cf. Meridian Products LLC v. United States, Slip Op. 14-20 (Feb. 19, 2014) (denying
USCIT 7 motion for remand in order to consider the applicability of Mid Continent Nail Corp. v.
United States, 725 F.3d 1295 (Fed. Cir. 2013)).
10
Opinion at 4, see Valves Ruling, Drapery Rail Kits Remand, and Auto Parts Remand.
11
Remand at 11-16, 23, Def’s Reply to Comm. at 5-6.
12
See Remand at 10-23. Commerce determined the Trim Kits are analogous to carpet trim,
an item explicitly covered by the language of the Orders.
Court No. 13-00018 Page 7

The plaintiff requests further remand, arguing that Commerce did not apply the

revised test in the rulings as ordered but instead created new limitations for the “finished goods

exclusion.”13 The plaintiff contends that even if these limitations exist, the Trim Kits are analogous

to the products covered under the limitations.14 The plaintiff also argues on several grounds that the

remand was unlawful.15 Commerce filed its reply to the plaintiff’s comments and argues that the

remand results should be confirmed in all respects. Commerce argues that it fully complied with the

courts instructions in the Opinion, and that its determinations are otherwise in accordance with law

and supported by substantial evidence. Def’s Reply to Comm. at 2, 14.

II. Jurisdiction and Standard of Review

Jurisdiction is proper pursuant to 28 U.S.C. § 1581(c) (2006). The court sustains

Commerce’s determination upon remand if it “complies with the court’s remand order, is supported

by substantial evidence on the record, and is otherwise in accordance with law.” Jinan Yipin Corp.

v. United States, 33 CIT 934, 637 F. Supp. 2d 1183, 1185 (2009), citing 19 U.S.C.

§1516a(b)(1)(B)(i) (2000). Substantial evidence “is more than a mere scintilla. It means such

relevant evidence as a reasonable mind might accept as adequate to support a conclusion.” Consol.

13
See Remand at 7-9, Pl’s Comm. in Resp. at 1, 4-6, 10-11.
14
Aluminum Extrusions for the People’s Republic of China: Comment Following Remand
Regarding Refrigerator/Freezer Trim Kits (July 1, 2013) (“Pl’s Remand Submission”) at 4, Remand
at 9, 15, Pl’s Comm. in Resp. at 5.
15
Pl’s Comm. in Resp. at 1-2,7-11. Plaintiff contends the remand was unlawful because
Commerce erroneously conducted its analysis as though Trim Kits were made entirely of aluminum
extrusions, based its decision on the drafter’s intent which is a factor outside of the permissible
regulatory interpretive considerations, and conducted its evaluation in a manner that is in conflict
with its own general principle of interpretation.
Court No. 13-00018 Page 8

Edison Co. v. NLRB, 305 U.S. 197, 229 (1938), see also Micron Tech., Inc v. United States, 117 F.3d

1386, 1393 (Fed. Cir. 1997). To support judicial review, “the path of Commerce’s decision must

be reasonably discernable”. Jinan Yipin Corp., Ltd. v. United States, 35 CIT ___, 800 F. Supp. 2d

1226, 1233 (2011), quoting NMB Singapore Ltd. v. United States, 557 F.3d 1316, 1319 (Fed. Cir.

2009), citing Motor Vehicle Mfrs. Ass’n v. State Farm Mut. Auto. Ins. Co., 463 U.S. 29, 43 (1983);

see also Timken U.S. Corp. v. United States, 421 F.3d 1350, 1355 (Fed. Cir. 2005) (explaining that

“it is well settled that an agency must explain its action with sufficient clarity to permit ‘effective

judicial review,’” and that “[f]ailure to provide the necessary clarity requires the agency action be

vacated”), quoting Camp v. Pitts, 411 U.S. 138, 142-43 (1973).

III. Discussion

A. Agency-defined Methodology

On remand, the definition of revised finished goods exclusion methodology from the

Drapery Rail Kits Remand and Solar Panel Mounting Ruling expressed by Commerce was

reasonable and supported by the language of the rulings. The plaintiff’s contention that Commerce

created an unsupported limitation for the finished goods exclusion and effectively applied the wrong

finished goods test on remand fails to recognize the entirety of the language of the ruling, as well as

the rationale expressed for the revision to the exclusion.16

As reflected in the language of the Orders and discussed in the Solar Panel Mounting

Ruling, Commerce generally requires a product to meet two criteria to be excluded as a “finished

goods kit.” To qualify, the product must (1) include all of the necessary parts to fully assemble a

16
Pl’s Comm. in Resp. at 1-5, Def’s Reply to Comm. at 6-9.
Court No. 13-00018 Page 9

final finished good with no further processing or fabrication, such as cutting or punching, and (2)

be capable of assembly “as is” into a finished product. See Solar Panel Mounting Ruling at 9, see

also scope of Orders. The plaintiff argues that the proper revised test for a “finished goods kit,” as

applied in the Drapery Rail Kits Remand, is “[i]n order for [the product] to be excluded from the

scope of the Orders, it must be ready for installation and require no further finishing or fabrication”.17

Citing to the Solar Panel Mounting Ruling, the plaintiff claims that Commerce also evaluates if a

kit contains all the necessary parts to fully assemble a finished good “as is” into a finished product

when applying the test.18 The plaintiff contends that on remand, instead of identifying the new test

or providing an analysis of the test criteria, Commerce created a limitation for the application of the

criteria to products intended to “display or incorporate interchangeable and customizable materials”

or “work with removable/replaceable components.” The plaintiff argues that such a limitation is not

supported by the scope language or prior scope rulings, and that Commerce provides no evidence

to support considering a product’s ability to display customizable materials as having any bearing

on whether it is a finished good.19 Thus, the plaintiff maintains, such a limitation erroneously

“foreclose[s] [Commerce’s] application of the finished goods analysis to Meridian’s products”.20

17
The plaintiff claims this test is also supported by the methodology adopted in the Valves
Ruling and applied in the Auto Parts Remand. Pl’s Comm. in Resp. at 1-6, see Remand at 7-8, citing
Pl’s Remand Submission at 2-3, citing Valves Ruling at 7-8.
18
Remand at 8-9, referencing Pl’s Remand Submission at 3, citing Solar Panel Mounting
Ruling at 8.
19
See Remand at 8-9, Pl’s Comm. in Resp. at 4-6.
20
Pl’s Comm. in Resp. at 1.
Court No. 13-00018 Page 10

Commerce’s conclusions in its antidumping and countervailing duty determinations

are entitled to deference if reasonable and supported by substantial evidence. See Mitsubishi

Materials Corp. v. United States, 17 CIT 301, 303-04, 820 F.Supp. 608, 613 (1993) (citations

omitted). On remand, Commerce determined that the Drapery Rail Kits Remand and Solar Panel

Mounting Ruling established that,

a finished goods kit which is designed to display or incorporate customizable materials
or work with removable/replaceable components will be excluded if it contains, at the
time of importation, all of the parts necessary to assemble a final finished good for such
purposes.

Remand at 14 (bolding added; original emphasis otherwise). It can reasonably be inferred from the

remand language that Commerce intends for three types of goods to be considered full-assembly

final-finished goods even if they are imported without a part of the kit, provided they contain at the

time of importation all of the parts necessary to assemble a final finished good “for such purposes.”

The Drapery Rails Remand and Solar Panel Mounting Ruling provide support for Commerce’s

determination to limit the application of the revised methodology to these types of goods.

The Drapery Rails Remand supports Commerce’s determination by demonstrating

that two types of goods qualify as a “finished goods kit” capable of creating a fully assembled

finished good even when imported without a customizable part of the kit; (1) those products that are

“designed to incorporate customizable goods” and (2) those products that are “designed to display

customizable goods” (italics added). At issue in the ruling were “drapery rail kits” consisting of an

aluminum rail, threaded round bracket, and a decorative bracket and finials to be used for functional

and aesthetic drapery purposes. Commerce analyzed if the kits, designed with the intent of attaching

or incorporating curtains or drapes and containing all of the pieces required for a consumer to install
Court No. 13-00018 Page 11

and use the product for drapery purposes, were properly excludable from the Orders as a “finished

goods kit.”21 In making its determination, Commerce considered the Banner Stands22 and EZ Wall

Systems Rulings23 that involved wall display units designed to exhibit interchangeable and

customizable graphical materials. It found that the drapery rail kits were analogous to the display

units in the rulings and the picture-frame-with-backing-and-glass express exclusion, and that like

these products the drapery rail kits “contain all of the parts necessary to assemble a drapery rail

system, save for the decorative drapes or curtains that may be affixed at a later date, and are designed

to meet the specifications of the end customer.”24 Relying on a rationale similar to the one it

expressed in the two display-unit rulings, Commerce concluded that it would be “unreasonable to

require that the drapery rail kits at issue be accompanied at the time of importation with decorative

drapes that are intended to be customizable” to qualify for the “finished goods kit” exclusion.25

21
Drapery Rail Kits Remand at 4, 5, 8, see Remand at 12.
22
Memorandum to Christian Marsh, Deputy Assistant Secretary for Antidumping and
Countervailing Duty Operations, “Final Scope Ruling on Banner Stands and Back Wall Kits” (Oct.
19, 2011) (“Banner Stands Ruling”) at 9-10.
23
Memorandum to Christian Marsh, Deputy Assistant Secretary for Antidumping and
Countervailing Duty Operations, “Final Scope Ruling on EZ Fabric Wall Systems” (Nov. 2011) (“EZ
Wall Systems Ruling”) at 9-10.
24
Drapery Rail Kits Remand at 7-9, citing the scope of the Orders (“just as with a
photograph inserted into a completed picture frame (i.e., a frame containing glass and backing) or
material containing a graphical image that is affixed to a display unit, . . . the drapes that are attached
to the assembled drapery railing kits at issue constitute readily interchangeable materials that can
change with users’ needs.”) (citation omitted).
25
Id. at 8-9. See Banner Stands Ruling at 10 (“it is evident that the banner stands and back
wall kits at issue are designed to incorporate interchangeable graphic materials that can change with
users’ needs. Therefore, we find it would be unreasonable to require that the products at issue must
be accompanied with affixed graphical material that cannot be removed or altered at a later date.”);
(continued...)
Court No. 13-00018 Page 12

The Solar Panel Mounting Ruling cited on remand further supports Commerce’s

interpretation of the revision to the finished goods exclusion methodology. In the ruling, Commerce

permitted a third type of good to be excluded from the scope of the Orders: one that “work[s] with

removable or replaceable components”, to qualify as a final finished good fully assembled “as is”

even if it is imported without the “non-essential” component intended to be removable or

replaceable.26 Commerce determined that a kit that enables solar panels to be mounted on roofs or

grounds to “create” useful solar panel systems, and which is generally compatible with solar panels

available in the market, qualified as a “finished good kit.”27 In so determining, Commerce restated

the “two” criteria from the scope to be evaluated to determine if a product qualifies as a “finished

goods kit”: (1) if all of the necessary parts to fully assemble a finished good with no further

fabrication were included, and (2) if the product can be assembled “as is” into a finished product.28

Commerce found that the solar mounting system kits contained all of the parts

necessary to fully assemble a finished product without further fabrication. It then concluded that

although the solar panel mounting kit was imported without the solar panel, the kit could be fully

assembled “as is” as required by the second criteria because, “like picture frames, banner stands and

25
(...continued)
see also EZ Wall Systems Ruling at 10 (“[a]s in the Banner Stands Scope Ruling, we find it would
be unreasonable to that the fabric covers with graphics accompany the EZ wall systems”).
26
See Remand at 12-14; see also Solar Panel Mounting Ruling at 9.
27
Id., citing Solar Panel Mounting Ruling at 6-9. The unassembled solar panel mounting
systems consists of extruded aluminum rails, cast aluminum kedges, galvanized steel posts and
non-aluminum fasteners.
28
Solar Panel Mounting Ruling at 8.
Court No. 13-00018 Page 13

back wall kits”, the mounting systems are “designed to work with removable/replaceable

components” and the kits “need not include these non-essential parts to constitute a finished good.”29

Contrary to the plaintiff’s arguments, the Drapery Rail Kits Remand and Solar Panel

Mounting Ruling are not evidence of Commerce changing the way it determines whether all products

qualify for the finished goods exclusion. Rather, the court finds that the rulings indicate Commerce

has adjusted its methodology for determining if certain types of products qualify for the finished

goods kit exclusion in order to avoid unreasonable results when applying the Orders.30 The court

29
Remand at 12-13, citing Solar Panel Mounting Ruling at 6, 9.
30
The court notes that on remand Commerce appears to have taken a similar approach to
interpreting the revised finished goods kit methodology as applied in the Valves Ruling and the Auto
Parts Remand, in order to avoid cases where the previous approach may lead to an “absurd result”
for products it determined were subassemblies. Commerce ultimately concluded here on remand
that the rulings demonstrate “a subassembly will be excluded if it contains, at the time of
importation, all of the parts necessary to assemble a final finished good.” Remand at 13. In that
process, it referenced the Valves Ruling, where it reasoned that requiring all parts needed to assemble
a downstream product to be present for it to qualify as a “finished good kit” may in some instances
expand the scope of the Orders, which are intended to cover aluminum extrusions. See Remand at
10-12, citing Valves Ruling at 7, citing scope of the Orders. Commerce’s specific reference to the
Valves Ruling drew attention to its revision of its “finished goods kit” and “subassemblies” analyses
and “the manner in which it determines if a given product is a ‘finished good’ or ‘finished goods
kit.’” Id., citing Valves Ruling at 6-7. In the Valves Ruling, Commerce defined a subassembly as
“partially assembled merchandise” that is “designed to work with other parts to form a larger
structure or system”. Commerce determined that the scope language, which includes aluminum
extrusion components that form subassemblies “as imported as part of the finished goods kit”, as
well as the language defining “finished goods kits” both indicated that subassemblies may be
excluded from the scope if they enter as finished goods or finished goods kits and require no further
finishing or fabrication. Commerce thus concluded that the fire hose valve kit in question, for
assembly into a fire truck after importation and containing all the parts necessary to assemble a
completed side mount valve and requiring no further finishing or fabrication prior to being
assembled, qualified as a “finished goods kit” even without the fire truck accompanying the kit at
import. Valves Ruling at 7-8.
Commerce also referenced as support for its redetermination the Auto Parts Remand, in
which it applied the methodology of the Valves Ruling in determining certain auto parts for
(continued...)
Court No. 13-00018 Page 14

finds that Commerce’s remand definition of the “finished goods kit” methodology, as applied in the

Drapery Rail Kits Remand and Solar Panel Mounting Ruling, reflects the rulings and scope

language, is reasonable, and is supported by substantial evidence.

B. Application of Methodology

Although on remand Commerce reasonably defined the methodology applied in the

Drapery Rail Kits Remand and Solar Panel Mounting Ruling, it has failed to provide substantial

evidence to support a rational connection for its conclusion that the analysis from the rulings, as so

construed, is not applicable to the Trim Kits.31 As discussed supra, the language Commerce used

to describe its revised methodology in the remand reasonably allows for the application of the

revised analysis to three types of goods: goods that are “designed to display . . . customizable

materials,” or goods “designed to incorporate customizable materials,” or goods “designed to . . .

work with removable or replaceable components.”32 On remand, Commerce concluded that although

the Trim Kits include all the necessary parts to assemble a finished trim kit, may be assembled “as

is”, and require no further fabrication or finishing, they are not analogous to the products in the

rulings because they do not “incorporate or display customizable materials and therefore the

30
(...continued)
heating/cooling systems of a car as subassemblies because they were “inherently part of a larger
whole.” It found that the auto parts qualified as finished goods because they were both ready for
installation with no additional fabrication or finishing required, and that they were ready for
assembly without any additional hardware or parts even considering that they were imported without
a car. See Remand at 11-12, citing Auto Parts Remand at 10.
31
See Amanda Foods, 33 CIT 1407, 1417, 647 F.Supp.2d 1368, 1379 (2009), cited by
Yangzhou Bestpak Gifts & Crafts Co., Ltd. v. United States, 716 F.3d 1370, 1378 (Fed. Cir. 2013).
32
Remand at 13-16, Def’s Reply to Comm. at 5-6, 8-9, 13, Pl’s Comm. in Resp. at 6.
Court No. 13-00018 Page 15

reasoning of the Drapery Rail Kits and Solar Panel Mounting Systems Remand does not apply.” Id.

The court finds that Commerce provides substantial evidence to support its determination that Trim

Kits do not “incorporate” customizable material. However, the court also finds that Commerce fails

to point to substantial evidence to support the finding that the Trim Kits are not intended to “display”

an appliance or “work with removable or replaceable components.”

The plaintiff contends that its Trim Kits, when affixed to the cabinetry surrounding

an appliance, are akin to the products evaluated in the rulings and serve the purpose of the “aesthetic

enhancement of stainless steel refrigerators and freezers”. The plaintiff argues that, like the drapery

rails in the Drapery Rail Kits Remand, the banner stand displays in the Banner Stands Ruling, and

the solar panel kits in the Solar Panel Mounting Ruling, the Trim Kits are designed to enhance the

use of the removable or interchangeable components they display. The plaintiff also claims the Trim

Kits meet the “finished goods kits” criteria under the rulings, because the kits can be assembled “as

is” into a finished good and are sold separately from customizable appliances. See Remand at 6, 9,

15, see also Pl’s Remand Submission at 4-6, 8. The plaintiff contests that Commerce did not

provide an explanation of why the customizable nature of Trim Kits is not instructive in qualifying

those as excluded finished goods, when Commerce determined that the “customizable” nature of

the drapery rail kits considered in the Drapery Rail Kits Remand was crucial to exclusion of those

products from the scope of the Orders.33

Commerce opposes the plaintiff’s argument, claiming that the Drapery Rail Kits

Remand and Solar Panel Mounting Ruling did not evaluate if the kits “enhanced” a customizable

33
See Remand at 9, citing Pl’s Remand Submission at 6.
Court No. 13-00018 Page 16

material, as Meridian avers, but instead rested its consideration on whether the kits “incorporated

the customizable materials.”34 Addressing the criteron that a kit must “incorporate” a customizable

good, Commerce distinguishes a Trim Kit, which is affixed to cabinetry surrounding an opening for

an appliance, from goods that are “incorporated” by being hung, mounted or inserted onto or into

the imported kit.35 After conducting its analysis of why a Trim Kit does qualify as a good that

“incorporates” a customizable appliance, Commerce concludes that the Trim Kits do not “display

or incorporate a refrigerator” (italics added). Id. The analysis and explanations in the remand

provide the court with sufficient clarity on how Commerce reached its determination that Trim Kits

do not “incorporate” a refrigerator, but the same cannot be said for Commerce’s determination that

the Trim Kits do not “display” an appliance. See Timken U.S. Corp. v. United States, 421 F.3d at

1355 (citation omitted).

Commerce provides no analysis, outside of conclusory statements, to support its

conclusion that an “aesthetic frame” designed to “enhance the appearance of the cabinetry

surrounding the appliance in the consumer’s home and lend[ ] a customized, ‘built-in’ look” is not

intended to “display” a “customizable” freezer or refrigerator unit. To support its determination,

Commerce only states that the “aesthetic” function of the plaintiff’s Trim Kits does not place the kits

34
Remand at 15, citing Drapery Rail Kits Remand at 8 (describing the product as being
“designed to incorporate readily interchangeable drapers or curtains that can change with users’
needs and are intended to be customizable[”]) and Solar Panel Mounting Ruling at 9 (describing the
product as being “designed to work with removable/replaceable components”.).
35
Remand at 15, citing Scope of the Orders; Banner Stands Ruling at 10. Commerce
referenced to the drapes in the Drapery Rail Kits Remand that were “incorporated” by hanging on
a rail, the solar panels being mounted on mounts in the Solar Panel Mounting Ruling, and a picture
“inserted” into a picture frame with glass and backing for photo frames expressly included in the
Orders.
Court No. 13-00018 Page 17

in the same category as picture frames or drapery rail kits because the same could also be said for

carpet trim, a product expressly included in the Orders that enhances a floor and that can be used

with interchangeable carpets. Remand at 15. But in the Drapery Rail Kits Remand, Commerce

expressly states that the decorative bracket and finials of the drapery rail kit serve both a functional

and aesthetic purpose. Arguably, a decorative drapery rail aesthetically enhances the appearance of

a drape, and a picture frame aesthetically enhances the appearance of a photograph, and both can be

used with interchangeable materials. Here, however, Commerce provides no analysis on why a

photo frame is a means to display a customizable photograph or why a graphic display unit or a

drapery rail are means to display their respective customizable components, and why a Trim Kit is

not a means to do likewise.36 The mere conclusory statement that the Trim Kits share a characteristic

with a good expressly included in the Orders does not amount to substantial evidence on the record

that the goods do not in fact “display” a customizable material. The court finds no direction for

distinguishing between those goods which “incorporate” and those goods which “display,” and it is

left without direction as to the meaning of the latter term as well as Commerce’s reasoning behind

this portion of its remand determination. Commerce fails to adequately address in its remand what

is required for a product to qualify as one designed to “display” a customizable good and has not

explained with sufficient clarity why Trim Kits do not meet this criterion.

Commerce also fails to expressly conclude or analyze in its remand if, like the

products in the Solar Panel Mounting Ruling, the Trim Kits are designed to “work with

36
See, e.g., Remand at 16, stating only that the Trim Kits are not a “means to display
customizable materials”.
Court No. 13-00018 Page 18

removable/replaceable components” that can change with user needs.37 As discussed supra,

Commerce concluded that the reasoning of the Solar Panel Mounting Ruling does not apply to Trim

Kits. However, it arrived at this conclusion only after it had evaluated if the Trim Kits “incorporate”

customizable materials, without mentioning if the kits “work with removable/replaceable

components” or otherwise conducting a separate analysis for this criterion. See Remand at 15. After

conducting its “incorporate” analysis, Commerce acknowledges that the Trim Kits can be assembled

“as is,” but it concludes the fact that they are sold separately from an appliance irrelevant because

the same can be said of the carpet trim and fence posts, products expressly covered by the Orders.

However, Commerce provides no explanation or analysis for this determination, and the court is

unsure of the significance -- if any -- that Commerce places on this quality when determining a

good’s ability to “work with removable/replaceable components.” This feature is also, it would

seem, present in the solar mounting system sold separately from the solar panels it is designed to

work with that formed the basis of the Solar Panel Mounting Ruling. Commerce does not provide

any explanation to distinguish these products as they relate to Trim Kits or explanation or analysis

of what is required of a product to qualify as “work[ing] with removable/replaceable components,”

or why the appliances the Trim Kits ascetically enhance do not constitute “non-essential” removable

or replaceable parts for purposes of applying the revised “finished goods kit” analysis from the Solar

37
Remand at 12-14, referencing Solar Panel Mounting Ruling at 6, 9. As mentioned,
Commerce explains that in the Solar Panel Mounting Ruling it found that “like picture frames,
banner stands, and backwall kits, the mounting systems are designed to work with
removable/replaceable components”.
Court No. 13-00018 Page 19

Panel Mounting Ruling.38 In other words, Commerce’s analysis falls short of that minimally cleared

path that would enable the reader to understand the logic of the remand.

Therefore, the court cannot conclude that Commerce’s determination that the Trim

Kits are not analogous to the products designed to “work with removable/replaceable components”

in the Solar Panel Mounting Ruling or designed to “display customizable materials” in the Drapery

Rail Kits Remand, and its determination that the methodology or logic of these rulings does not apply

to the Trim Kits, are supported by substantial evidence. The court agrees that it did not “direct or

require Commerce find that Meridian’s trim kits are excluded” in the Opinion,39 and it here expresses

no view on the correctness of the Drapery Rail Kits Remand or Solar Panel Mounting Ruling (or any

other prior ruling, for that matter), it only here observes that Commerce’s ruling on remand evinces

inconsistency therewith. On further remand, Commerce must support its remand decision with

findings of fact grounded in substantial evidence of record,40 and if it again reaches the same

conclusion, it must sufficiently explain why the Trim Kits do not meet the “additional criteria

identified” in the prior scope rulings in order for the court to understand and review the analysis.41

38
Remand at 12-13, referencing Solar Panel Mounting Ruling at 6, 9. As discussed supra,
in the Solar Panel Mounting Ruling, it was determined that the mounting systems which worked
with removable/replaceable components did not need to include the “non-essential parts”, being solar
panels, to constitute a finished good.
39
Def’s Reply to Comm. at 6, 9.
40
Union Steel v. United States, 33 CIT 1392, 1399, 645 F. Supp. 2d 1298, 1305 (2009)
opinion set aside on reconsideration, 35 CIT ___, 804 F. Supp 2d 1356 (2011) judgment entered,
Slip Op. 13-105, 35 CIT ___ (Aug. 8, 2013).
41
Remand at 16. See Int’l Imaging Materials, Inc. v. U.S. International Trade Comm’n, 29
CIT __, Slip. Op. 06-11 at 13 (Jan. 23, 2006).
Court No. 13-00018 Page 20

III. Conclusion

As it stands, the administrative redetermination that the Trim Kits do not constitute

a “finished goods kit” excluded from the scope of the antidumping and countervailing duty orders

on aluminum extrusions from the People’s Republic of China relies upon incomplete analysis that

is in conflict with substantial evidence of record. See Yangzhou Bestpak Gifts & Crafts Co., Ltd. v.

United States, 716 F.3d at 1378, see also Universal Camera Corp. v. NLRB, 340 U.S. 474, 477

(1951). The matter must therefore be, and hereby is, remanded again. On remand, Commerce shall

proceed from a clean slate on the question of whether the Trim Kits fall within the scope of the

Orders, fully taking into account the prior relevant scope rulings in accordance with the foregoing.

Commerce shall submit its remand results no later than 60 days after the date of this order, and the

parties shall submit their proposed scheduling order(s) for comments on the second remand results

within 10 days thereafter.

So ordered.

/s/ R. Kenton Musgrave
R. Kenton Musgrave, Senior Judge
Dated: March 26, 2014
New York, New York