IN THE SUPREME COURT OF TEXAS
444444444444
NO . 11-0425
444444444444
PETROLEUM SOLUTIONS, INC., PETITIONER,
v.
BILL HEAD D/B/A BILL HEAD ENTERPRISES AND TITEFLEX, INC., RESPONDENTS
4444444444444444444444444444444444444444444444444444
ON PETITION FOR REVIEW FROM THE
COURT OF APPEALS FOR THE THIRTEENTH DISTRICT OF TEXAS
4444444444444444444444444444444444444444444444444444
Argued December 4, 2012
JUSTICE LEHRMANN delivered the opinion of the Court, in which CHIEF JUSTICE HECHT ,
JUSTICE GREEN , JUSTICE JOHNSON , JUSTICE WILLETT , JUSTICE GUZMAN , JUSTICE DEVINE , and
JUSTICE BROWN joined, and in Parts I and II of which JUSTICE BOYD joined.
JUSTICE BOYD delivered an opinion dissenting in part.
We deny the motions for rehearing of Bill Head d/b/a Bill Head Enterprises and Petroleum
Solutions, Inc. We withdraw our opinion of July 11, 2014, and substitute the following in its place.
Bill Head, doing business as Bill Head Enterprises (Head), hired Petroleum Solutions, Inc.
to manufacture and install an underground fuel system. Following a large diesel leak, Head sued
Petroleum Solutions for its resulting damages, and the trial court rendered judgment on the jury’s
verdict in Head’s favor. The trial court also rendered judgment in favor of third-party defendant
Titeflex, Inc., the alleged manufacturer of a component part incorporated into the fuel system, on
Titeflex’s counterclaim against Petroleum Solutions for statutory indemnity. The court of appeals
affirmed the judgment. Petroleum Solutions presents two principal issues for our review. First,
Petroleum Solutions challenges the trial court’s issuance of spoliation sanctions against it, which
included submitting a spoliation instruction to the jury and striking Petroleum Solutions’ statute-of-
limitations and statutory-indemnity defenses. Second, Petroleum Solutions complains that Titeflex’s
statutory-indemnity claim fails as a matter of law.
We hold that the trial court abused its discretion by charging the jury with a spoliation
instruction and striking Petroleum Solutions’ defenses because those sanctions do not conform to
the standards set forth in our recent decision in Brookshire Brothers, Ltd. v. Aldridge, 438 S.W.3d
9 (Tex. 2014). Because the trial court’s abuse of discretion was harmful with respect to the claims
between Head and Petroleum Solutions, we reverse the court of appeals’ judgment as to Head’s
claims and remand to the trial court for further proceedings between those parties. However, we
agree with the trial court and the court of appeals that Titeflex was entitled to statutory indemnity
from Petroleum Solutions and hold that any spoliation error with respect to the indemnity claim was
harmless. Therefore, we affirm the court of appeals’ judgment as to Titeflex’s indemnity claim.
I. Factual and Procedural Background
Head owns and operates the Silver Spur Truck Stop in Pharr, Texas. Head contracted with
Petroleum Solutions to install a diesel-fuel storage system that included pipes necessary to transport
the fuel from the tanks to the station’s fuel pumps. The parties agree that flex connectors—parts of
the piping system—were components of the new fuel system. However, they disagree about who
manufactured the connectors that Petroleum Solutions used in the system.
2
After installing the fuel system, Petroleum Solutions recommended installing an automatic
tank-gauging system to detect any fuel releases. Head agreed, and Petroleum Solutions completed
the system’s installation in October 1999. Shortly after both the fuel and gauging systems were
installed, Head began to experience problems, mainly with the gauging system, and requested
maintenance and repair work from Petroleum Solutions on numerous occasions. In November 2001,
Head contacted Petroleum Solutions about fluctuations in the fuel inventory data from the gauging
system. Petroleum Solutions investigated and discovered that a major diesel-fuel release had
occurred. The Texas Natural Resource Conservation Commission (now the Texas Commission on
Environmental Quality) recorded a recovery of approximately 20,000 gallons of diesel fuel from the
surrounding ground.
Petroleum Solutions workers immediately notified Head and Petroleum Solutions’ president,
Mark Barron, about the leak, and Barron traveled to the Silver Spur to help determine the cause.
After testing, Petroleum Solutions concluded that the leak originated in the piping that ran from the
tanks to the fuel dispensers. Barron subsequently informed the Silver Spur’s general manager,
Robert Carpenter, that the source of the leak was a faulty flex connector located under “Dispenser
Number 4.” Barron showed Carpenter the allegedly faulty connector and asked if Petroleum
Solutions could retain it for safekeeping and possible testing. Carpenter agreed to Barron’s request.
That was the last time Carpenter or Head saw the flex connector. Petroleum Solutions would later
say that Titeflex had manufactured the flex connector, but photos of the connector did not reveal the
manufacturer, and Petroleum Solutions was unable to produce records showing that Titeflex was the
manufacturer.
3
Petroleum Solutions reported the incident to its liability insurer, which engaged attorney
Elizabeth Neally to represent Petroleum Solutions. In February 2002, Barron gave the flex connector
to Neally, who sent it to metallurgist David Hendrix for evaluation along with instructions not to
perform destructive testing. Hendrix performed an unspecified analysis on the component, then
processed it into inventory for storage at WH Laboratories. In April 2002, Neally sent Hendrix a
letter inquiring about his review and inspection of the flex connector, and Hendrix responded with
an invoice for his professional engineering services, which included photographing the flex
connector, four hours of professional time, and one hour of laboratory time. Petroleum Solutions
did not contact Hendrix again or otherwise inquire about the connector until March 2006, shortly
after Head filed suit. By that time, the storage facility at WH Laboratories had been demolished, and
certain contents of the building had been discarded or destroyed in conjunction with the building’s
demolition. Howard Heinsohn, the lab’s manager, testified at a deposition that he orally advised
Hendrix that the building would be torn down and its contents destroyed, and that Hendrix retrieved
some items and told Heinsohn he could throw out the rest. However, nothing in the record suggests
Petroleum Solutions was informed that WH Laboratories would be torn down or even knew that the
connector was being stored there.
Beginning in December 2001, Head withheld payments from Petroleum Solutions, which it
blamed for causing the leak. In May 2002, Head’s attorney wrote a letter to Petroleum Solutions
threatening suit. While the letter requested that Petroleum Solutions contact Head to resolve their
dispute amicably, the letter did not request production of the flex connector. Head eventually filed
suit against Petroleum Solutions on February 13, 2006, asserting claims for breach of the warranty
4
of fitness, breach of the implied warranty of good and workmanlike services, and negligence.1
Because the lawsuit was filed more than four years after the leak was discovered, Head also pleaded
the discovery-rule and fraudulent-concealment exceptions to the statute of limitations. Petroleum
Solutions answered, asserting limitations and other affirmative defenses. It also alleged that Titeflex
had manufactured the missing flex connector that caused the leak.
Petroleum Solutions then filed a third-party petition against Titeflex, claiming indemnity and
contribution based on a products-liability theory. Head followed in Petroleum Solutions’ footsteps
and amended its petition to assert a strict products-liability claim directly against Titeflex. The
amended petition attributed the leak and the resulting damages to several deficiencies, including: a
failure of the line leak detector and gauging system; the faulty flex connector, which was “part of the
[fuel] system” and which Titeflex allegedly sold to Petroleum Solutions; and Petroleum Solutions’
failure to properly install or repair the fuel and gauging systems.
Titeflex moved for summary judgment on both Petroleum Solutions’ and Head’s claims,
urging that no evidence showed that a Titeflex-manufactured connector was used in the Silver Spur’s
fuel system. The trial court ultimately denied Titeflex’s motion. Petroleum Solutions also twice
moved for summary judgment on limitations grounds, but the trial court denied both motions.
Petroleum Solutions then designated an expert to opine that the damages resulting from the leak were
attributable to the flex connector, but the expert failed to attend three noticed depositions and was
de-designated by Petroleum Solutions on the eve of trial.
1
Head’s sixth amended petition is the live pleading in this action. In accordance with that pleading, the claims
submitted to the jury included negligence, negligent undertaking, breach of contract, fraud, breach of implied warranty
of good and workmanlike services, and breach of fiduciary duty.
5
In January 2008, Titeflex moved for sanctions against Petroleum Solutions. Titeflex claimed
that Petroleum Solutions spoliated evidence by failing to produce the allegedly faulty flex connector
and sought a jury instruction to that effect. Head then nonsuited its claims against Titeflex and also
moved for sanctions against Petroleum Solutions. Head argued that Petroleum Solutions
intentionally destroyed crucial evidence and requested that the trial court consider a broad range of
sanctions, including striking Petroleum Solutions’ pleadings. Petroleum Solutions responded to the
sanctions motions with an affidavit from Neally and the deposition testimony of Hendrix and
Heinsohn. Petroleum Solutions argued that it did not deliberately destroy any evidence, had not
engaged in culpable or negligent conduct with respect to the flex connector, and did not have a duty
to preserve the flex connector once the limitations period had expired.
While the sanctions motions were pending, Titeflex filed a counterclaim against Petroleum
Solutions, claiming it owed Titeflex a statutory duty of indemnity under Texas Civil Practice and
Remedies Code chapter 82. Eventually, unable to produce the allegedly faulty flex connector or,
after three failed attempts, an expert for deposition to state that a faulty flex connector caused the
leak, Petroleum Solutions nonsuited its third-party claims against Titeflex shortly before trial.
Titeflex’s indemnity counterclaim remained pending. Head’s live petition at the time of trial alleged
that Petroleum Solutions had misrepresented that the flex connector caused Head’s damages, and
that those damages were caused by defects in the systems that Petroleum Solutions manufactured
as well as by Petroleum Solutions’ failure to properly install, maintain, and repair the systems.
At a pretrial hearing on Titeflex’s and Head’s motions for sanctions, the trial court struck
Petroleum Solutions’ affirmative defenses, including its statute-of-limitations and statutory-
6
indemnity defenses, and ruled that a spoliation instruction would be given to the jury. Head’s and
Titeflex’s claims against Petroleum Solutions then proceeded to trial. At trial, Head urged that
Petroleum Solutions had repeatedly misrepresented the cause of the leak. Head offered expert
testimony that Petroleum Solutions’ improper installation of a union at a shear valve, not the flex
connector, caused the leak. The jury charge included the following spoliation instruction:
You, the jury, are instructed that Petroleum Solutions, Inc. destroyed, lost, or
failed to produce to this Court material evidence that by law should have been
produced as evidence for your deliberations. You are further instructed you may, but
are not required to, presume this evidence is unfavorable to Petroleum Solutions, Inc.
The jury found in Head’s favor and awarded Head nearly $1.2 million. As to Titeflex’s statutory-
indemnity claim, the jury found that Petroleum Solutions was a manufacturer, that Titeflex was a
seller, and that Titeflex incurred reasonable attorney’s fees and expenses of $450,853.62. The trial
court rendered judgment on the jury’s verdict, and Petroleum Solutions appealed.
The court of appeals, with one justice dissenting, affirmed the trial court’s judgment except
as to the amount of prejudgment interest. ___ S.W.3d ___, ___. The court concluded that the
sanctions order was not an abuse of discretion because Petroleum Solutions’ failure to preserve the
flex connector significantly prejudiced Head and Titeflex, and Petroleum Solutions’ repeated
attempts to minimize its fault amounted to bad faith deserving of severe sanctions. Id. at ___. The
court of appeals also concluded that Petroleum Solutions’ arguments regarding the statute of
limitations were not relevant, that there was legally and factually sufficient evidence supporting the
verdict on Head’s claims, and that Titeflex was entitled to statutory indemnity from Petroleum
Solutions. Id. at ___, ___. The dissenting justice took issue with the trial court’s failure to articulate
7
any connection between Petroleum Solutions’ inability to produce the flex connector and the striking
of Petroleum Solutions’ statute-of-limitations defense. Id. at ___ (Vela, J., dissenting). The dissent
would have remanded the case for a new trial in which Petroleum Solutions could assert its defenses.
Id. at ___.
II. The Trial Court’s Sanctions
Petroleum Solutions challenges the trial court’s imposition of spoliation sanctions and, more
specifically, the court’s submission of a spoliation jury instruction and striking of Petroleum
Solutions’ affirmative defenses, including its limitations defense. Petroleum Solutions contends that
the trial court imposed death-penalty sanctions that violate the test set forth in TransAmerican
Natural Gas Corp. v. Powell, 811 S.W.2d 913 (Tex. 1991). Applying the standard for spoliation
sanctions we recently adopted in Brookshire Brothers, 438 S.W.3d at 20–26, we hold that the trial
court abused its discretion and remand for a new trial.2
In Brookshire Brothers, we adopted a framework governing the imposition of remedies for
evidence spoliation. We explained that whether a party spoliated evidence and whether a particular
remedy is appropriate are questions of law for the trial court. Id. at 20. Because the trial court bears
this responsibility, evidence of the circumstances surrounding alleged spoliation is generally
inadmissible at trial, as such evidence is largely irrelevant to the merits and unfairly prejudicial to
the spoliating party. Id. at 26. We further held in Brookshire Brothers that, to find that spoliation
2
Petroleum Solutions contends it is entitled to rendition of judgment on grounds that the evidence was legally
insufficient to support the jury’s findings in Head’s favor on its claims for negligence, fraud, breach of fiduciary duty,
breach of contract, and breach of warranty. Because Petroleum Solutions failed to challenge the sufficiency of the
evidence supporting the jury’s finding in Head’s favor on its negligent undertaking claim, which provides an independent
basis to support the trial court’s judgment, we need not address this issue.
8
occurred, the trial court must make affirmative determinations as to two elements. First, the party
who failed to produce evidence must have had a duty to preserve the evidence. Id. at 20. “[S]uch
a duty arises only when a party knows or reasonably should know that there is a substantial chance
that a claim will be filed and that evidence in its possession or control will be material and relevant
to that claim.” Id. (citation and internal quotation marks omitted). Second, the nonproducing party
must have breached its duty to reasonably preserve material and relevant evidence. Id. A party
cannot breach its duty without at least acting negligently. Id. at 20–21 & n.8.
Upon finding that spoliation occurred, the trial court must exercise its discretion in imposing
a remedy. In determining what remedy, if any, is appropriate, the court should weigh the spoliating
party’s culpability and the prejudice to the nonspoliating party. Id. at 21. Prejudice is evaluated
based on the spoliated evidence’s relevancy to key issues in the case, whether the evidence would
have been harmful to the spoliating party’s case (or, conversely, helpful to the nonspoliating party’s
case), and whether the spoliated evidence was cumulative of other competent evidence that may be
used in its stead. Id. at 21–22 (citing Trevino v. Ortega, 969 S.W.2d 950, 958 (Tex. 1998) (Baker,
J., concurring)).
While the trial court’s discretion to remedy an act of spoliation is broad, it is not limitless.
We review a trial court’s imposition of sanctions under an abuse of discretion standard. Cire v.
Cummings, 134 S.W.3d 835, 838 (Tex. 2004). Texas Rule of Civil Procedure 215.2 allows a trial
court to impose “just” sanctions for discovery abuse. TEX . R. CIV . P. 215.2. As we reaffirmed in
Brookshire Brothers, courts generally follow a two-part test in determining whether a particular
sanction for discovery abuse is just. 438 S.W.3d at 21 (citing TransAmerican, 811 S.W.2d at 917).
9
First, a direct relationship must exist between the offensive conduct, the offender, and the sanction
imposed. See id.; Spohn Hosp. v. Mayer, 104 S.W.3d 878, 882 (Tex. 2003) (per curiam). To meet
this requirement, a sanction must be directed against the wrongful conduct and toward remedying
the prejudice suffered by the innocent party. TransAmerican, 811 S.W.2d at 917. Second, a sanction
must not be excessive, which means it should be no more severe than necessary to satisfy its
legitimate purpose. Id. This prong requires the trial court to consider the availability of lesser
sanctions and, “in all but the most exceptional cases, actually test the lesser sanctions.” Cire, 134
S.W.3d at 841.
In Brookshire Brothers, we also articulated more specific restrictions on a trial court’s
discretion to issue a spoliation instruction to the jury. We held that a trial court may submit a
spoliation instruction only if it finds (1) the spoliating party acted with intent to conceal discoverable
evidence, or (2) the spoliating party acted negligently and caused the nonspoliating party to be
irreparably deprived of any meaningful ability to present a claim or defense.3 438 S.W.3d at 23–26.
We noted in imposing this strict limitation that a spoliation instruction “can, in some sense, be
tantamount to a death-penalty sanction,” in that such an instruction can remove the focus of the trial
from the merits of the case and redirect it to the alleged conduct that gave rise to the sanctions. Id.
at 23. It follows, and we hold today, that in the context of remedying spoliation, the restrictions
articulated in Brookshire Brothers with regard to spoliation instructions also limit a trial court’s
3
Generally, we have stated that, consistent with due process considerations, discovery sanctions that “are so
severe as to preclude presentation of the merits of [a claim or defense] should not be assessed absent a party’s flagrant
bad faith or counsel’s callous disregard for the responsibilities of discovery.” TransAmerican, 811 S.W .2d at 918;
Spohn, 104 S.W .3d at 883. Similar reasoning underlies the limitations we placed on spoliation sanctions in Brookshire
Brothers.
10
discretion to issue other remedies akin to death-penalty sanctions, such as striking a party’s claims
or defenses.
In this case, we need not and do not decide whether Petroleum Solutions spoliated evidence.
We hold that, assuming it did, the trial court’s sanctions were an abuse of discretion because no
proof exists that Petroleum Solutions intentionally concealed evidence or that Petroleum Solutions’
spoliation irreparably deprived Head and Titeflex of any meaningful ability to present their claims.
First, no evidence shows that Petroleum Solutions acted with intent to conceal the flex connector,4
as nothing in the record suggests that Petroleum Solutions was ever informed that the facility where
the connector was being stored would be destroyed. To the contrary, the record shows the following
undisputed facts: (1) Barron took a component from the Silver Spur with the express consent of the
manager, Carpenter; (2) Barron gave the component to independent counsel, Neally; (3) Neally
engaged the services of a metallurgist, Hendrix; (4) Hendrix took possession of the component and
performed non-destructive testing; (5) Hendrix placed the component in a warehouse for storage;
(6) the warehouse was torn down; (7) Petroleum Solutions was not told the warehouse was being
torn down; (8) Head did not request that Petroleum Solutions produce the connector before the
warehouse was demolished or at any time before filing suit; and (9) Petroleum Solutions asked
Hendrix to return the connector when Head filed suit, but neither the warehouse staff nor Hendrix
could find it. In sum, no evidence demonstrates that Petroleum Solutions intentionally lost or
destroyed the connector.
4
Only Head maintains that Petroleum Solutions acted intentionally. Titeflex notes in its briefing that it “has
never contended that misplacement of the flex connector was deliberate or intentional.”
11
Further, no evidence shows that the missing connector irreparably deprived Head and Titeflex
of any meaningful ability to present their claims. At trial, Head’s theory of Petroleum Solutions’
liability was unrelated to the flex connector; Head successfully urged that Petroleum Solutions’
improper installation of a union at a shear valve, not the flex connector, caused the leak. This fact,
in conjunction with the fact that Head never requested access to the connector before filing suit,5
confirms that the missing flex connector did not irreparably hinder Head’s presentation of its claims.
And as discussed further below, the missing flex connector did not hinder Titeflex’s ability to
present its indemnity claim.
In sum, the trial court abused its discretion in charging the jury with a spoliation instruction
and striking Petroleum Solutions’ affirmative defenses because those sanctions do not comply with
the procedural and substantive standards set forth in Brookshire Brothers. The harm of such
sanctions, which foreclose (or at least severely impede) a party from presenting the merits of its
claims or defenses, is typically patent and is compounded by improper presentation of evidence and
argument to the jury on the spoliation issue.6 See Brookshire Bros., 438 S.W.3d at 29; Wal-Mart
Stores, Inc. v. Johnson, 106 S.W.3d 718, 724 (Tex. 2003). Accordingly, we reverse the court of
appeals’ judgment and remand the case to the trial court for further proceedings between Petroleum
5
To the extent Head argues that Petroleum Solutions misrepresented the cause of the leak so as to prevent Head
from filing suit within the limitations period, this argument will be relevant to the evaluation of Petroleum Solutions’
statute-of-limitations defense on remand.
6
W e leave to the trial court’s discretion the extent to which evidence of the missing connector is relevant to
whether Head’s claims are barred by limitations.
12
Solutions and Head consistent with this opinion.7 As discussed below, however, the unique
circumstances of Titeflex’s indemnity claim render harmless any spoliation error as it relates to that
claim.
III. Titeflex’s Statutory-Indemnity Claim
Finally, we address whether Titeflex, a component-product manufacturer and seller, is
entitled to indemnity from Petroleum Solutions, a finished-product manufacturer, under Texas Civil
Practice and Remedies Code section 82.002, a provision of the Texas Products Liability Act. As
described above, Head sued Petroleum Solutions and Titeflex under a products-liability theory,
Petroleum Solutions filed third-party claims against Titeflex for contribution and indemnity, and
Titeflex filed a counterclaim against Petroleum Solutions for statutory indemnity under section
82.002. Although both Head and Petroleum Solutions nonsuited their claims against Titeflex, the
parties proceeded to trial on Titeflex’s indemnity counterclaim. The jury awarded Titeflex
approximately $450,000 in attorney’s fees and expenses, and the trial court rendered judgment on
that verdict. The court of appeals affirmed.
A. Duty to Indemnify Between Finished-Product Manufacturers and Component-Product
Manufacturers
Section 82.002 requires the manufacturer of an allegedly defective product to indemnify an
innocent seller for any loss arising out of a products-liability action. TEX . CIV . PRAC. & REM . CODE
7
Petroleum Solutions contends that we should render judgment on its statute-of-limitations defense. As noted
above, the trial court twice denied Petroleum Solutions summary judgment on this defense. Because the trial court struck
the defense before trial, even if the court did so erroneously, it would be improper to render judgment for Petroleum
Solutions on limitations grounds on appeal of the final judgment. See Ackermann v. Vordenbaum, 403 S.W .2d 362, 365
(Tex. 1966) (refusing to review order denying summary judgment on appeal from final judgment).
13
§ 82.002(a); see also Fitzgerald v. Advanced Spine Fixation Sys., Inc., 996 S.W.2d 864, 867 (Tex.
1999). The Act describes a manufacturer’s duty to indemnify as follows:
A manufacturer shall indemnify and hold harmless a seller against loss arising out of
a products liability action, except for any loss caused by the seller’s negligence,
intentional misconduct, or other act or omission, such as negligently modifying or
altering the product, for which the seller is independently liable.
TEX . CIV . PRAC. & REM . CODE § 82.002(a). The term “loss” is defined to include “court costs and
other reasonable expenses, reasonable attorney fees, and any reasonable damages.” Id. § 82.002(b).
The Act broadly defines “products liability action,” “seller,” and “manufacturer”:
“Products liability action” means any action against a manufacturer or seller for
recovery of damages arising out of personal injury, death, or property damage
allegedly caused by a defective product . . . .
“Seller” means a person who is engaged in the business of distributing or otherwise
placing, for any commercial purpose, in the stream of commerce for use or
consumption a product or any component part thereof.
“Manufacturer” means a person who is a designer, formulator, constructor, rebuilder,
fabricator, producer, compounder, processor, or assembler of any product or any
component part thereof and who places the product or any component part thereof
in the stream of commerce.
Id. § 82.001(2)–(4). Under these definitions, “all manufacturers are also sellers, but not all sellers
are manufacturers.” Gen. Motors Corp. v. Hudiburg Chevrolet, Inc., 199 S.W.3d 249, 256 (Tex.
2006) (Hudiburg). And, with one exception not relevant here, nothing in the Act precludes one
person from being both a manufacturer and a seller of the same product or component. See id.
Titeflex contends that Petroleum Solutions owes it a duty to indemnify under section 82.002
because the fuel system is a product, Petroleum Solutions is the manufacturer of that product, and
14
Titeflex is the innocent seller of a component part allegedly used in Petroleum Solutions’ defective
finished product. In light of our analysis of the indemnity statute in Hudiburg, we agree.
In Hudiburg, a truck driver was injured and the driver of another vehicle was killed when the
truck, which had been assembled by attaching a service body to a cab chassis, split apart during a
collision. Id. at 252. A personal-injury and wrongful-death suit followed against both the chassis
manufacturer and Hudiburg, the dealer who had sold the truck and arranged for it to be assembled.
Id. In that suit, which eventually settled, the plaintiffs alleged that the vehicle, including its fuel
system, was unreasonably dangerous. Id. Hudiburg then brought a statutory-indemnity action
against the manufacturers of the cab chassis (GM) and the service body (Rawson-Koenig), the
“component products” of the truck. Id.
Clarifying the framework governing a manufacturer’s duty to indemnify under the Act, we
reaffirmed that the duty is triggered by the injured claimant’s pleadings. Id. at 256. Specifically, the
duty is triggered by allegations of a defect in the manufacturer–indemnitor’s product and is not
dependent on an adjudication of the indemnitor’s liability.8 Id. By contrast, section 82.002(a)’s
exception to the duty to indemnify for loss caused by the seller is triggered not by the pleadings, but
by an affirmative finding that the seller–indemnitee is independently liable. Meritor Auto., Inc. v.
Ruan Leasing Co., 44 S.W.3d 86, 91 (Tex. 2001) (“[I]t is the manufacturer’s ‘duty to indemnify’ that
applies regardless of outcome, . . . [b]ut for the Manufacturers to implicate section 82.008(a)’s
exception to that duty, it must be established that seller’s conduct ‘caused’ the loss.”).
8
Under the common law, however, an indemnitor’s liability for the product defect must be adjudicated or
admitted. Hudiburg, 199 S.W .3d at 255.
15
Further elaborating on the statutory-indemnity framework in the context of claims involving
both a finished-product manufacturer and seller as well as the manufacturer and seller of a
component part incorporated into that finished product, we held:
Under the statute, and disregarding the exception in section 82.002(d), the
manufacturer of a component product alleged by a claimant to be defective has a duty
to indemnify an innocent seller/manufacturer of a finished product which
incorporates the component from loss arising out of a products liability action related
to the alleged defect, but the manufacturer of an allegedly defective finished product
has a duty to indemnify the innocent seller/manufacturer of a component product for
the same loss. If neither the component-product manufacturer nor the
finished-product manufacturer is innocent, depending not on allegations but on proof,
both indemnity claims under the statute will fail. If both are innocent, again
depending on proof, the indemnity claims offset each other.
Hudiburg, 199 S.W.3d at 256–57 (emphasis added). In other words, depending on the alleged
product defect or defects, an injured claimant’s pleadings may trigger a duty to indemnify on the part
of the finished-product manufacturer, the component-product manufacturer, or both. See id. If
competing duties to indemnify are triggered, the ultimate success of those claims will depend on
what the evidence shows as to the fault of the indemnitee sellers. See id.
In light of the claimant’s allegations in Hudiburg that the component product manufactured
by GM—the chassis—was defective, we held that GM owed Hudiburg a duty to indemnify for losses
related to the personal-injury suit, to the extent Hudiburg was not independently liable.9 Id. at 262.
We also noted that, consistent with the statutory framework, “GM would be entitled to statutory
9
Rawson-Koenig, on the other hand, did not owe Hudiburg a duty to indemnify because the claimant’s
pleadings, which alleged only that the vehicle as a whole and the fuel system in particular were defective, could not fairly
be read to allege a defect in the service body, which was the component product Rawson-Koenig manufactured.
Hudiburg, 199 S.W .3d at 257–58; see also Meritor Auto., Inc., 44 S.W .3d at 91.
16
indemnity from Hudiburg—although GM has not sought indemnity—for losses related to allegations
of defects unrelated to the chassis, if GM was not independently liable for such losses.” Id.
Applying Hudiburg to the case at hand, we hold that Petroleum Solutions owed Titeflex a
statutory duty of indemnity. Head initially sued only Petroleum Solutions for damages resulting
from the fuel leak, alleging the leak was caused by both a defective flex connector as well as a
“faulty” line leak detector and leak-detection system. Shortly after Petroleum Solutions brought
third-party claims against Titeflex, Head amended its petition to assert a strict-liability claim directly
against Titeflex and to clarify the allegations that the leak-detection system as a whole was defective
and was manufactured by Petroleum Solutions. After nonsuiting Titeflex, Head again amended its
petition to retract the allegations of a defective flex connector and to allege only product defects that
were attributable solely to Petroleum Solutions. Based on Head’s pleadings, Petroleum Solutions,
the manufacturer of an allegedly defective finished product (the fuel system), owed Titeflex, the
alleged seller of a component part of that product, a duty to indemnify it under section 82.002 for
losses arising out of this products-liability action, to the extent Titeflex was not independently liable
for those losses.10 And while Titeflex’s losses are limited to its attorney’s fees and costs incurred
in the suit, such expenditures qualify as “losses” under the indemnity statute. TEX . CIV . PRAC. &
REM . CODE § 82.002(b).
10
We note that, based on Head’s early pleadings, Titeflex also owed Petroleum Solutions a competing duty to
indemnify it for losses related to alleged defects in the flex connector, to the extent Petroleum Solutions was not
independently liable. Hudiburg, 199 S.W .3d at 262. However, Head amended its pleadings to delete any allegations
of a defective flex connector, and Petroleum Solutions nonsuited its indemnity and contribution claims against Titeflex
before trial.
17
Citing Hudiburg and Owens & Minor, Inc. v. Ansell Healthcare Products, Inc., 251 S.W.3d
481 (Tex. 2008), the dissent contends that, even if Head’s pleadings triggered Petroleum Solutions’
duty to indemnify Titeflex for its losses in this action, that duty did not extend to alleged defects in
the flex connector that Petroleum Solutions did not manufacture. Similarly, Petroleum Solutions
argues that Hudiburg’s reasoning does not apply here because Titeflex was sued only for alleged
defects in the flex connector, and “[Petroleum Solutions] could not be liable to indemnify Titeflex
for a product that [Petroleum Solutions] did not manufacture.” That Petroleum Solutions did not
manufacture the flex connector, however, is immaterial. The indemnity statute broadly provides that
“[a] manufacturer shall indemnify and hold harmless a seller against loss arising out of a products
liability action,” except to the extent the seller is independently liable. TEX . CIV . PRAC. & REM .
CODE § 82.002(a). The purpose of section 82.002 is to protect innocent sellers by assigning
responsibility for the burden of products-liability litigation to product manufacturers. Hudiburg, 199
S.W.3d at 255, 262. When an injured claimant pleads that a manufacturer’s product is defective, an
innocent seller who suffers loss is protected regardless of whether it is upstream or downstream of
that product’s manufacturer. Id. at 256. Thus, as the manufacturer of an allegedly defective finished
product, Petroleum Solutions has a duty to indemnify an innocent seller of a component integrated
into that product, such as Titeflex, for its loss arising out of Head’s products-liability action.
The dissent’s reliance on Owens & Minor is inapposite. In that case, we held that a latex-
glove manufacturer did not owe an innocent distributor a duty to defend and indemnify it against
claims involving gloves that other companies manufactured. 251 S.W.3d at 482. From this holding,
the dissent opines that Titeflex cannot recover for its losses because Head’s pleadings did not
18
attribute the defective fuel system to Titeflex, only the flex connector. This application is improper
in light of the circumstances presented and renders the framework recognized in Hudiburg a nullity.11
Owens & Minor involved a one-way duty to indemnify owed by multiple manufacturers to a non-
manufacturing seller12 for its losses. By contrast, this case involves the competing duties to
indemnify owed to each other by a finished-product manufacturer and a component-product
manufacturer. As we held in Hudiburg, the duty to indemnify when both of these products are
alleged to be defective runs both ways, as Petroleum Solutions and Titeflex are both manufacturers
and sellers of their respective products vis-a-vis each other. 199 S.W.3d at 256. When these
competing claims are pursued, Hudiburg explains that the burden will ultimately fall on the party
whose product is found to be defective. See id. at 256–57 (recognizing that such competing claims
will both fail if the evidence shows that neither party is innocent, and will offset each other if the
evidence shows that both are innocent).
In this case, only Titeflex pursued its indemnity claim through trial, and, as discussed below,
no evidence supports a finding that Titeflex was independently liable for its loss. Accordingly,
Titeflex is entitled to recover for its loss arising out of this products-liability action.
11
W hile the dissent couches its analysis in terms of the scope of the duty, the result of the dissent’s interpretation
is that a component-product manufacturer could only be entitled to indemnity if an injured plaintiff alleged it was directly
responsible for unrelated defects in other components or the finished product. As a practical matter, that will rarely, if
ever, happen.
12
Only manufacturers owe a duty to indemnify under chapter 82. T EX . C IV . P RAC . & R EM . C ODE § 82.002(a).
19
B. Improvement to Real Property May Constitute a Product
Petroleum Solutions next argues that the fuel system was an improvement to real property,
not a “product” that it manufactures, and that the indemnity statute therefore does not apply. Our
decision in Fresh Coat, Inc. v. K-2, Inc. forecloses this argument. 318 S.W.3d 893 (Tex. 2010). The
issue in Fresh Coat was whether a synthetic-stucco system comprised of components that were
installed on a house’s exterior walls constituted a product for purposes of the indemnity statute. Id.
at 895. We explained that, pursuant to the statute, “a product is something distributed or otherwise
placed, for any commercial purpose, into the stream of commerce for use or consumption.” Id. at
897. We held that the stucco system was a product under that broad definition and rejected the
manufacturer’s argument that “products placed into the stream of commerce are not products once
they become integrated into . . . real property.” Id.
Here, Petroleum Solutions makes the same argument we rejected in Fresh Coat. Petroleum
Solutions cites several courts of appeals’ decisions for the general premise that the law distinguishes
between products and improvements to real property. However, none of the cases Petroleum
Solutions cites involved the indemnity statute, and they all predate our decision in Fresh Coat. We
therefore hold that the fuel system qualifies as a product under chapter 82 notwithstanding its
integration into real property.
C. Resolution of Titeflex’s Indemnity Claim
For the foregoing reasons, we agree with the trial court and court of appeals that Petroleum
Solutions owed Titeflex a duty to indemnify under section 82.002. Petroleum Solutions argues that,
because the trial court erroneously struck its indemnity defenses as a spoliation sanction, Titeflex’s
20
indemnity claim should be remanded for a new trial along with Head’s claims so that Petroleum
Solutions may seek a jury finding that Titeflex was independently liable for its loss. Petroleum
Solutions contends that the record contains excluded evidence implicating a defective product
manufactured by Titeflex that would have supported such a finding. We disagree. Having reviewed
all the record evidence on which Petroleum Solutions relies, both that admitted and that excluded
at trial, we find that the only evidence that Titeflex even manufactured the connector in question was
Barron’s statements (both in testimony and in letters sent by Petroleum Solutions in 2001 and 2002)
that Petroleum Solutions had identified a Titeflex connector as the culprit. Petroleum Solutions has
never been able to produce any documentation supporting that statement, and other evidence in the
record rebuts it. Moreover, other than Barron’s conclusory testimony that the missing connector
leaked during pressure testing and a statement in a one-page work report generically referencing a
“bad flex hose,” Petroleum Solutions has never identified any evidence that would support a finding
that the connector in question was defective or caused the leak. Petroleum Solutions’ expert on the
connector failed to attend his deposition and was de-designated on the eve of trial independently of
the trial court’s sanctions. See Nissan Motor Co. v. Armstrong, 145 S.W.3d 131, 137 (Tex. 2004)
(noting that “competent expert testimony and objective proof that a defect caused the [injury]” are
generally necessary to support a finding that a third party is responsible based on a design defect).
In sum, we see nothing in the record, including the evidence that the trial court excluded, that
constitutes more than a scintilla of evidence to support a finding that Titeflex was independently
liable for its loss. See Kindred v. Con/Chem, Inc., 650 S.W.2d 61, 63 (Tex. 1983) (“When the
evidence offered to prove a vital fact is so weak as to do no more than create a mere surmise or
21
suspicion of its existence, the evidence is no more than a scintilla and, in legal effect, is no
evidence.”). Accordingly, any error by the trial court in meting out spoliation sanctions was
harmless with respect to Titeflex’s indemnity claim.13 See Brown v. Goldstein, 685 S.W.2d 640, 641
(Tex. 1985) (holding that a judge may refuse to submit an issue to the jury “if no evidence exists to
warrant its submission”). Remanding that claim for a new trial would serve no purpose other than
delay and added expense for all involved. Accordingly, our reversal of the court of appeals’
judgment as to the claims between Head and Petroleum Solutions does not affect the validity of the
judgment in favor of Titeflex, and we affirm that portion of the judgment.
****
We hold that the trial court’s spoliation sanctions were an abuse of discretion and that the
court of appeals erred in affirming the judgment in Head’s favor. However, we agree with the
portion of the court of appeals’ judgment in favor of Titeflex. We therefore affirm the court of
appeals’ judgment in part, reverse it in part, and remand for further proceedings between Head and
Petroleum Solutions consistent with this opinion.
____________________________________
Debra H. Lehrmann
Justice
OPINION DELIVERED: December 19, 2014
13
Further, the only findings the jury made with respect to the indemnity claim, other than the amount of
attorney’s fees and expenses Titeflex incurred, were that Petroleum Solutions was a manufacturer and Titeflex was a
seller. The trial court, not the jury, found that Titeflex was “an innocent seller” and was entitled to indemnity as a matter
of law. Accordingly, the improper spoliation instruction was irrelevant to the indemnity claim.
22