Slip Op. 18-2
UNITED STATES COURT OF INTERNATIONAL TRADE
HYUNDAI STEEL CO.,
Plaintiff,
v.
UNITED STATES,
Defendant, Before: Jane A. Restani, Judge
AK STEEL CORP., ARCELORMITTAL Court No. 16-00161
USA LLC, CALIFORNIA STEEL INDUS.,
INC., NUCOR CORP., STEEL DYNAMICS, PUBLIC VERSION
INC., and UNITED STATES STEEL CORP.
Defendant-Intervenors.
OPINION
[Commerce’s final results in antidumping duty investigation of CORE from Korea remanded.]
Dated: January 10, 2018
J. David Park, Arnold & Porter Kaye Scholer LLP, of Washington, DC, argued for
plaintiffs. With him on the brief were Andrew Treaster, Daniel Wilson, Henry Almond, and
Sylvia Yun Chu Chen.
Elizabeth Speck, Commercial Litigation Branch, Civil Division, U.S. Department of
Justice, of Washington, DC, argued for defendant. Of counsel on the brief was James Ahrens II,
Office of Chief Counsel for Trade Enforcement and Compliance, U.S. Department of
Commerce, of Washington, DC.
Grace Kim, Joshua Morey, Kathleen Cannon, Paul Rosenthal, and R. Alan Luberda,
Kelley Drye & Warren, LLP, of Washington, DC, for defendant-intervenor ArcelorMittal USA
LLC.
Court No. 16-00161 Page 2
Roger Schagrin, Christopher Cloutier, John Bohn, and Paul Jameson, Schagrin
Associates, of Washington, DC, for defendant-intervenors Steel Dynamics, Inc. and California
Steel Industries, Inc.
Stephen Jones, and Daniel Schneiderman, King & Spalding, LLP, of Washington, DC,
for defendant-intervenor AK Steel Corporation.
Luke Meisner, Skadden Arps Slate Meagher & Flom, LLP, of Washington, DC, argued
for defendant-intervenor United States Steel Corporation. With him on the brief was Jeffrey
Gerrish.
Alan Price, Adam Teslik, Christopher Weld, Cynthia Galvez, Derick Holt, Laura El-
Sabaawi, Maureen Thorson, Stephanie Bell, Tessa Capeloto, Timothy Brightbill, and Usha
Neelakantan, Wiley Rein, LLP, of Washington, DC, for defendant-intervenor Nucor
Corporation.
Restani, Judge: In this action challenging a United States Department of Commerce
(“Commerce”) Antidumping Duty Investigation Determination regarding Corrosion-Resistant
Steel Products (“CORE”) from Korea, Hyundai Steel Co. (“Hyundai”) requests that the court
hold the final determination unsupported by substantial record evidence and otherwise not in
accordance with the law. Hyundai accordingly requests that Commerce’s determination be
remanded for correction of error.
BACKGROUND
Based on petitions filed by defendant-intervenors, various domestic steel producers, on
June 30, 2015, Commerce initiated an investigation concerning the possible sale of CORE from
various countries at less than fair value (“LTFV”). Certain Corrosion-Resistant Steel Products
From Italy, India, the People’s Republic of China, the Republic of Korea, and Taiwan: Initiation
of Less-Than-Fair-Value Investigations, 80 Fed. Reg. 37,228, 37,228 (Dep’t Commerce June 30,
2015). Hyundai, a Korean CORE producer and exporter, was selected on July 23, 2015, as one
of two mandatory Korean respondents in this investigation. Hyundai accounted for one of the
two largest volumes of Korean CORE exports, per U.S. Customs and Border Protection (“CBP”)
Court No. 16-00161 Page 3
entry data for the period of investigation. Respondent Selection for the Antidumping Duty
Investigation of Certain Corrosion-Resistant Steel Products from the Republic of Korea, A-580-
878, POI 04/01/2014–03/30/2015, at 8 (July 23, 2015). This action concerns Commerce’s
treatment, for computation of the United States sale price, 1 of Hyundai’s further manufactured
products, other than completed automobiles, including skelp, sheets or blanks (“SSBs”), tailor-
welded blanks (“TWBs”), and after-market auto parts. 2 To manufacture the latter two product
categories, Hyundai first sold CORE to its U.S. subsidiary, Hyundai Steel America, Inc.
(“HSA”), in coil form. HSA then sold the imported CORE: (1) in unaltered form; (2) in slightly
further manufactured form, e.g., as SSBs; or (3) as TWBs. HSA sold the foregoing products to
both affiliated and unaffiliated vendors that performed additional further processing before
selling the ultimate product to an affiliated automobile manufacturer. Hyundai Steel Section A
Questionnaire Response, A-580-878, POI 04/01/2014–03/31/2015, at 2–3 (Sept. 4, 2015). In
almost every case, the CORE sold through HSA is ultimately consumed in the production of
1
In determining whether the subject merchandise is being sold at “less than fair value,” a “fair
comparison shall be made between the export price or constructed export price and normal
value.” 19 U.S.C. § 1677b(a) (2015). Normal value is defined as “the price at which the foreign
like product is first sold . . . for consumption in the exporting country, in the usual commercial
quantities and in the ordinary course of trade and, to the extent practicable, at the same level of
trade as the export price or constructed export price.” 19 U.S.C. § 1677b(a)(1)(B)(i).
2
SSBs are products created by splitting, shearing, or stamping CORE coils. See Hyundai Steel’s
Section E and Additional Sales Data Response, A-580-878, POI 04/01/2014–03/31/2015, at Ex.
E-2 (Nov. 2, 2015). Skelp is produced by splitting coil, sheet is produced by shearing skelp or
coil, and blanks are produced by stamping (or pressing) skelp or coil. Id. TWBs are produced
by welding sheet or blanks in a butt joint configuration. Id.; Issues and Decision Memorandum
for the Final Affirmative Determination in the Antidumping Duty Investigation of Certain
Corrosion-Resistant Steel Products from the Republic of Korea, A-580-878, POI 04/01/2014–
03/31/2015, at 7 n. 9 (Dep’t Commerce, May 24, 2016) (“Final Det. I&D Memo”) (Hyundai uses
TWBs in automobile doors). [[
]]
CONFIDENTIAL INFORMATION OMITTED
Court No. 16-00161 Page 4
automobiles by Hyundai affiliates. Notice of Difficulty in Responding to Questionnaire and
Request for Alternate Calculation Method, A-580-878, POI 04/01/2014–03/31/2015, at 3 (Aug.
17, 2015) (“Notice of Difficulty”).
Early in the investigation, Hyundai unsuccessfully requested Commerce to apply the
“special rule” 3 in valuing Hyundai’s sales of further manufactured products for the purpose of
calculating Constructed Export Price. 4 Instead, Commerce determined that Hyundai must
submit a “Section E” response with cost and sales data for such products. Commerce published
3
In an ordinary case, the constructed export price (“CEP”) is the: “price at which the subject
merchandise is first sold (or agreed to be sold) in the United States . . . by or for the account of
the producer or exporter of such merchandise or by a seller affiliated with the producer or
exporter, to a purchaser not affiliated with the producer or exporter.” 19 U.S.C. § 1677a(b)
(1994).
The “special rule” applies where Commerce is seeking to determine the CEP of products
imported by the exporter or producer’s affiliate and with value added to the imported product in
the United States. See 19 U.S.C. § 1677a(e). If the value added by the affiliate “is likely to
exceed substantially” the value of the product upon importation, then Commerce “shall
determine” the CEP by using either (1) “[t]he price of identical [products] sold by the exporter or
producer to an unaffiliated person,” or (2) “[t]he price of other [products] sold by the exporter or
producer to an unaffiliated person.” 19 U.S.C. § 1677a(e)(1)–(2). The rule requires a “sufficient
quantity of sales to provide a reasonable basis for comparison” and that Commerce determines
that the use of such sales is appropriate. 19 U.S.C. § 1677a(e).
Under the “special rule,” therefore, Commerce would not use the actual sales price of the
specific sales. Instead, Commerce would substitute prices from sales of “identical” or “other”
merchandise. For example, where an importer sold a total of 90 identical units of CORE, 50 of
which did not qualify for the special rule and 40 of which did qualify for the special rule, if
Commerce were to apply the special rule to the latter units, the CEP applicable to all 90 units
would be the average sales price of the first 50 units. Whether this price would be higher or
lower than it would be without the “special rule” would depend upon the specific product, but it
nevertheless saves the respondent a significant reporting burden while easing Commerce’s
administrative burden.
4
Commerce did apply the “special rule” “when the first sale of corrosion-resistant steel to an
unaffiliated party [wa]s a completed automobile” produced by Hyundai Motor Manufacturing
Group (“HMMG”) or Kia Motor Manufacturing Group (“KMMG”). Decision Memorandum for
the Preliminary Determination in the Antidumping Duty Investigation of Certain Corrosion-
Resistant Steel Products from the Republic of Korea, A-580-878, POR: 04/01/2014–03/31/2015,
at 11 n.35 (Dec. 21, 2015) (“Prelim. Det. I&D Memo”). Hyundai does not argue here that its
sales of SSBs qualify for the “special rule.” Pl. Br. at 33–35.
Court No. 16-00161 Page 5
its preliminary determination on January 4, 2016, with a preliminary antidumping duty of 3.51
percent for Hyundai. Certain Corrosion-Resistant Steel Products From the Republic of Korea:
Affirmative Preliminary Determination of Sales at Less Than Fair Value and Postponement of
Final Determination, 81 Fed. Reg. 78, 79 (Dep’t Commerce Jan. 4, 2016) (“Preliminary
Determination”). 5 Between January and March of 2016, Commerce conducted verifications of
Hyundai’s reported home market sales, U.S. sales, and cost of production data. Over Hyundai’s
objections, however, Commerce, finding Hyundai’s submissions deficient, declined to verify
data associated with Hyundai’s affiliates’ U.S. manufacturing operations, or the sales associated
with such products. Cancellation of Hyundai Steel Company’s Constructed Export Price (CEP)
Verification of Further Manufactured Sales, A-580-878, POI 04/01/2014–03/31/2015, at 1–2
(Dep’t Commerce, Mar. 8, 2016) (“Verification Cancellation Letter”).
After having issued three supplemental questionnaires regarding Hyundai’s further
manufactured product cost and sales data in November 2015, December 2015, and February
2016, Commerce ultimately issued a final determination and order which applied an adverse
inference to the facts available (“AFA”) in calculating a final dumping margin of 47.8 percent
for Hyundai. Final Determination of Sales at Less Than Fair Value and Final Affirmative
Determination of Critical Circumstances, 81 Fed. Reg. 35,303, 35,304 (Dep’t Commerce June 2,
2016) (“Final Determination”); as amended by Certain Corrosion-Resistant Steel Products From
India, Italy, the People’s Republic of China, the Republic of Korea and Taiwan: Amended Final
Affirmative Antidumping Determination for India and Taiwan, and Antidumping Duty Orders,
81 Fed. Reg. 48,390, 48,393 (Dep’t Commerce July 25, 2016) (“Antidumping Duty Order”). In
5
Hereafter, citations to the titles of documents related to Commerce’s investigation of Korean
CORE will omit the portion of the title which precedes the colon.
Court No. 16-00161 Page 6
the memorandum appended to its Final Determination, Commerce noted myriad problems with
Hyundai’s responses to Commerce’s information requests. Issues and Decision Memorandum
for the Final Affirmative Determination in the Antidumping Duty Investigation of Certain
Corrosion-Resistant Steel Products from the Republic of Korea, A-580-878, POI 04/01/2014–
03/31/2015, at 7–14, 31–33 (Dep’t Commerce May 24, 2016) (“Final Det. I&D Memo”).
Hyundai timely filed a summons to commence this action on August 23, 2016, and filed a
complaint on September 6, 2016. Docket Nos. 1, 7. See 19 U.S.C. § 1516a(a)(2)(A) (2006); 28
U.S.C. § 2636(c) (1993). Hyundai moved for judgment on the agency record on March 20,
2016. Docket No. 51. This opinion follows briefing and oral argument by the parties and certain
defendant-intervenors.
JURISDICTION AND STANDARD OF REVIEW
The court has jurisdiction pursuant to 28 U.S.C. § 1581(c) (2016). Commerce’s final
results in an administrative review of an antidumping duty order are upheld unless they are
“unsupported by substantial evidence on the record, or otherwise not in accordance with law.”
19 U.S.C. § 1516a(b)(1)(B)(i).
DISCUSSION
Hyundai alleges Commerce’s Final Determination is deficient in two respects. First, it
argues Commerce unreasonably failed to apply the “special rule” applicable to merchandise with
value added after importation to Hyundai’s TWBs and auto parts. Second, Hyundai argues
Commerce erred in applying AFA with respect to Hyundai’s further manufactured TWBs, auto
parts, and SSBs.
Court No. 16-00161 Page 7
I. Commerce’s decision not to apply the “special rule” applicable to merchandise with
value added after importation was reasonable.
Hyundai first argues Commerce unreasonably declined to apply the “special rule”
applicable to merchandise with value added after importation to its TWBs and auto parts. Pl. Br.
at 33–41. Under 19 U.S.C. § 1677a(e) (1994), where the value added to an imported product in
the United States “is likely to exceed substantially” the value of the product upon importation,
Commerce “shall determine the constructed export price” using the price of either identical or
other subject merchandise sold by the producer to an unaffiliated entity. Under the applicable
regulations, a substantial excess in value requires an “estimate[d]” excess of “at least 65 percent
of the price charged to the first unaffiliated purchaser . . . in the United States.” 19 C.F.R.
§ 351.402(c)(2) (2013). Though Commerce “normally will determine” the prerequisite satisfied
in such circumstances, id., even where this threshold is met, application of the “special rule” is
left to Commerce’s reasonable exercise of discretion. RHP Bearings LTD v. United States, 288
F.3d 1334, 1344–46 (Fed. Cir. 2002).
On August 15, 2015, Hyundai submitted a letter requesting that Commerce apply the
“special rule” to its further manufactured products sold to unaffiliated purchasers in the United
States. Notice of Difficulty at 2. In response, regarding Hyundai’s sales of TWBs and auto
parts, Commerce requested that Hyundai “provide a calculation of the percentage of the value
added to the imported merchandise under consideration after importation and prior to sale to the
unaffiliated vendor.” Additional Guidance on information required to substantiate Hyundai Steel
Corporation’s Request for Alternative Calculation Method, A-580-878, POI 04/01/2014–
03/31/2015, at Attach. 1 (Dep’t Commerce Sept. 16, 2015). No specific guidance was provided
concerning how to account for the value added to further manufactured products incorporating
multiple subject imports. See id. Commerce cannot, however, be expected to provide specific
Court No. 16-00161 Page 8
instructions regarding aspects of a respondent’s manufacturing process of which it is unaware.
There is no indication in the record that, at the outset, Commerce was aware of this particular
reporting issue. 6
Nine days later, Hyundai responded with information on its sales of TWBs and auto
parts. Response to the Department’s Request for Additional Information, A-580-878, POI
04/01/2014–03/31/2015, at Ex.4 (Sept. 25, 2015) (“September 25 Response”). In a letter dated
October 15, 2015, Commerce determined, without explanation, that Hyundai failed to
demonstrate that the value added in the United States “is equal to or greater than 65 percent of
the imported coil with respect to Hyundai’s further manufactured sales of certain auto parts [and
TWBs],” and accordingly declined to apply the “special rule.” Hyundai Steel Company’s
Exclusion Request, A-580-878, POI 04/01/2014–03/31/2015, at 1 (Dep’t Commerce Oct. 15,
2015) (“Section E Request”).
Here, Hyundai first argues that Commerce failed to describe its preferred method for
evaluating value added, in violation of the Uruguay Round Agreements Act Statement of
Administrative Action (“SAA”). The SAA indicates “Commerce will provide” interested parties
with a description of the method chosen to evaluate value added. Uruguay Round Agreements
Act, Statement of Administrative Action, H.R. Rep. No. 103-316, vol. 1, at 825–26 (1994),
6
Although Hyundai alleges otherwise, Pl. Br. at 21, the record of an earlier ex-parte meeting
involving Commerce and Hyundai does not mention any particular issue. Ex Parte Meeting with
Hyundai Steel Company, A-580-878, POI 04/01/2014–03/31/2015, at 1 (Dep’t Commerce Aug.
21, 2015). The Notice of Difficulty which preceded this meeting referenced only reporting
issues regarding a possible Section E submission. Notice of Difficulty at 9–14.
Court No. 16-00161 Page 9
reprinted in 1994 U.S.C.C.A.N. 4040, 4165 (“SAA”). 7 Defendant-intervenors contend that by
not mandating a “precise calculation,” the SAA does not require Commerce to provide a detailed
explanation supporting its decision to apply the “special rule.” Def.-Int. Br. at 16.
In relevant part, the SAA provides:
[F]or purposes of estimating whether the value added in the United States is likely
to substantially exceed the value of the imported product, it is the
Administration’s intent that Commerce not be required to perform a precise
calculation of the value added. Requiring such a precise calculation would defeat
the purpose of the new rule of saving Commerce the considerable effort of
measuring precisely the U.S. value added. Commerce will provide interested
parties, normally as part of the preliminary determination, with a description of
the method chosen and an explanation regarding the selection of such method.
SAA at 826. Defendant-intervenors’ interpretation of this passage, which omits the last sentence
and focuses on the absence of a need for “precise calculation,” is unavailing. “[P]recise
calculation” is more logically juxtaposed with “estimation.” To give meaning to the entire
passage, including the last sentence, it is reasonably read as requiring that Commerce provide
some description of its method of estimating whether the value added in the United States is
likely to substantially exceed the value of the imported product. This likewise serves the
purposes underlying the “special rule.” See Antidumping Duties; Countervailing Duties, 62 Fed.
Reg. 27,296, 27,353 (Dep’t Commerce May 19, 1997) (“the purpose of section 772(e) is to
reduce the administrative burden on the Department”). Neither the “special rule” statute, nor its
7
The SAA is an “authoritative expression” when interpreting and applying the Uruguay Round
Agreements Act. 19 U.S.C. § 3512(d) (1994). See also Micron Tech., Inc. v. U.S., 243 F.3d
1301, 1309 (Fed. Cir. 2001).
Court No. 16-00161 Page 10
regulations, 8 nor the SAA, however, specify a particular method of calculation that could be
applicable in all cases.
By clarifying the methods by which respondents’ submissions will be evaluated,
Commerce reduces its administrative burden by warding off inapposite submissions or avoiding
the burden of having to recalculate the value added by itself. Here, Commerce contends that the
insufficiencies of Hyundai’s calculations were adequately explained in Commerce’s Final
Determination. 9 See Final Det. I&D Memo at 24–25. See also Decision Memorandum for the
Preliminary Determination in the Antidumping Duty Investigation of Certain Corrosion-
Resistant Steel Products from the Republic of Korea, A-580-878, POI 04/01/2014–03/31/2015,
at 11 (Dep’t Commerce Dec. 21, 2015) (“Prelim. Det. I&D Memo”) (providing no further
explanation for the insufficiencies of Hyundai’s calculations). Yet, upon reviewing Hyundai’s
September 25 Response, Commerce likely should have been aware of Hyundai’s particular
reporting complication, and yet it offered no detailed description of its preferred method of
estimation before issuing its Final Determinations. In this case, however, if there were a
procedural misstep, it is of no moment. Availability of the “special rule” is to be determined
early on, in order to leave time for the main ordinary calculations, if necessary. Its intended
beneficiary is Commerce, thus, a respondent has the burden to demonstrate its eligibility.
8
The applicable regulation states generally: “The Secretary normally will estimate the value
added based on the difference between the price charged to the first unaffiliated purchaser for the
merchandise as sold in the United States and the price paid for the subject merchandise by the
affiliated person.” 19 C.F.R. § 351.402(c)(2).
9
In its Final Determination, Commerce interpreted the “special rule” regulation as indicating that
“the appropriate value added calculation for further manufacturing compares: (i) the total value
of the Hyundai-produced CORE used to produce the TWB (or auto part); and (ii) the price
charged to the first unaffiliated purchaser for the TWB (or auto part).” Final Det. I&D Memo at
24 (emphasis added).
Court No. 16-00161 Page 11
Hyundai failed to satisfy the 65% value-added threshold necessary for application of the “special
rule.”
Hyundai’s September 25 submission relied upon an unreasonable calculation method.
This is not the first value-added case; in the absence of more specific instructions from
Commerce, Hyundai could have adapted an analogous approach from a prior case to calculate
the value added to its further manufactured products. Hyundai does cite DRAMS from Korea as
support for its approach. Plaintiff Br. at 35, 38; Dynamic Random Access Memory
Semiconductors of One Megabit or Above From the Republic of Korea; Preliminary Results of
Antidumping Duty Administrative Review, 60 Fed. Reg. 47,149-03, 47,150 (Dep’t Commerce
Sept. 11, 1995) (“DRAMs from Korea”). 10 In DRAMS from Korea, a case involving imported
DRAMS combined on a circuit board to manufacture memory modules after importation,
Commerce applied the following approach: “For DRAMs that were further manufactured into
memory modules after importation, we deducted all value added in the United States, pursuant to
10
Although Commerce rightly notes that the “special rule” statute was not in effect at the time
DRAMs from Korea was decided, Def. Br. at 20, the “special rule” statute does not preclude
recourse to methods of calculation which predated its adoption, to the extent that basic concepts
such as further manufacturing remain the same. Even though it was obvious in DRAMS from
Korea that there were multiple DRAMS on each memory module sold in the United States,
Hyundai asserts that Commerce permitted the total adjusted U.S. price for a memory module to
be compared to the constructed foreign market value (“FMV”) for a single DRAM. This was not
Commerce’s approach in DRAMS from Korea, and in any case it would be nonsensical to
proceed in such a manner, before or after the special rule. In DRAMS from Korea, Commerce
found no foreign market sales of memory modules featuring the same configurations of DRAMS
as the memory modules produced and sold in the U.S. To construct the FMV, Commerce thus,
inter alia, “summed the cost of production for each DRAM included on each type of module to
obtain the cost of all the imported components included on the module.” DRAMS from Korea,
61 Fed. Reg. at 20,219. The constructed FMV was then compared with the U.S. sales price for a
memory module featuring identical DRAMS, minus, inter alia, the value added by U.S. further
manufacturing. Id. It would thus defeat the purpose of this calculation, meant to compare
identical groups of DRAMS, to subtract the value of one or more foreign-produced DRAMS as
part of the value added by U.S. further manufacturing.
Court No. 16-00161 Page 12
[§ 1677a(e)]. The value added consists of the costs of the materials, fabrication, and general
expenses associated with the portion of the merchandise further manufactured in the United
States, as well as a proportional amount of profit or loss attributable to the value added.”
DRAMS from Korea, 60 Fed. Reg. at 47,150 (emphasis added); see also Dynamic Random
Access Memory Semiconductors of One Megabit or Above From the Republic of Korea; Final
Results of Antidumping Duty Administrative Review, 61 Fed. Reg. 20,216, 20,216 (Dep’t
Commerce May 6, 1996) (adopting the same calculation method). In calculating the value
added, DRAMS from Korea thus included additional materials associated with further
manufacturing in the U.S., such as a circuit board, but excluded all imported subject materials,
such as the DRAMS affixed to those circuit boards. By contrast, Hyundai’s calculation method,
which counted the value of one subject import as part of the “value added” to a product made of
two subject imports, is not supported by past practice and is unreasonable. September 25
Response at Ex. 4. 11
By failing to offer any reasonable calculation, whether or not it was one preferred by
Commerce, Hyundai did not meet its burden; Hyundai was double-counting a credit. After
removing the value of the second CORE, based on the record, Hyundai’s sales of TWBs and auto
parts do not meet the 65-percent threshold. 12 Final Det. I&D Memo at 24–25. Hyundai
contends that its November and December data would permit a favorable recalculation, but as
11
Moreover, this was indicated to Hyundai in defendant-intervenors’ comments on its September
25, 2015, submission. U.S. Steel Comments, A-580-878, POI 04/01/2014–03/31/2015, at 2–6
(Oct. 2, 2015).
12
This conclusion is also supported by a study commissioned by Defendant-Intervenors for
purposes of their August 20, 2015, comments on Hyundai’s August 15, 2015, letter. Def.-Int.
Br. at 17; U.S. Steel Comments Regarding Hyundai’s August 17, 2015 Notice of Difficulty, A-
580-878, POI 04/01/2014–03/31/2015, at Ex. 2 (Aug. 20, 2015).
Court No. 16-00161 Page 13
described in Part II of this opinion, that data was untimely. As Hyundai failed to satisfy the
prerequisites of 19 C.F.R. § 351.402(c)(2), Commerce’s decision not to apply the “special rule”
to Hyundai’s sales of TWBs and auto parts was not unreasonable or arbitrary and represented a
proper exercise of its discretion. 13 The court now turns to calculations under normal methods.
II. Commerce’s application of AFA was reasonable as to Hyundai’s sales of TWBs and
auto parts, but unreasonable as to Hyundai’s sales of SSBs.
Hyundai next challenges Commerce’s adverse application of facts otherwise available in
determining the dumping margin for sales of SSBs, TWBs, and auto parts.
A respondent in an antidumping investigation is obligated to prepare an “accurate and
complete record in response to questions plainly asked by Commerce.” Tung Mung Dev. Co. v.
United States, 25 C.I.T. 752, 789 (2001) (citing Olympic Adhesives, Inc. v. United States, 899
13
Hyundai’s argument that the complexities associated with reporting on its further
manufactured products justify Commerce’s application of the “special rule” likewise fail.
Section 1677a(e) does not require application of the “special rule” based on complexity alone.
Although Commerce has applied the “special rule” in past cases where respondent encountered
reporting difficulties, all cases cited by Hyundai are distinguishable. In HRS from the
Netherlands, respondent had already satisfied the 65-percent threshold. Decision Memorandum
for the Preliminary Determination in the Less-Than-Fair-Value Investigation of Certain Hot-
Rolled Steel Flat Products from the Netherlands, A-421-813, POI 07/01/2014–06/31/2015, at
11–12 (Dep’t Commerce Mar. 14, 2016), unchanged in Certain Hot-Rolled Steel Flat Products
From the Netherlands: Final Determination of Sales at Less Than Fair Value and Negative Final
Determination of Critical Circumstances, 81 Fed. Reg. 53,421 (Dep’t Commerce Aug. 12, 2016).
In CRS from Korea, Commerce applied the “special rule” because it was able to verify
respondent’s reporting with respect to the further manufactured products in question. Issues and
Decision Memorandum for the Final Affirmative Determination in the Antidumping Duty
Investigation of Certain Cold-Rolled Steel Products from the Republic of Korea, A-580-881, POI
07/01/2014–06/30/2015, at 65–66 (Dep’t Commerce July 20, 2016). In PET Film from
Thailand, the manufacturer bought film from many producers, including respondent, whereas
HSA only purchased CORE from Hyundai. Use of Hyundai’s CORE was, at least in theory, thus
significantly easier to track. Notice of Preliminary Determination of Sales at Not Less Than Fair
Value: Polyethylene Terephthalate Film, Sheet, and Strip from Thailand, 73 Fed. Reg. 24,565,
24,568–69 (Dep’t Commerce May 5, 2008), unchanged in Notice of Final Determination of
Sales at Less Than Fair Value: Polyethylene Terephthalate Film, Sheet, and Strip from Thailand,
73 Fed. Reg. 55,043 (Dep’t Commerce Sept. 24, 2008).
Court No. 16-00161 Page 14
F.2d 1565, 1571 (Fed. Cir. 1990)). Commerce is authorized by 19 U.S.C. § 1677e(a) to make a
determination on the basis of “facts otherwise available” where, inter alia: (1) necessary
information is not available in the record; or (2) an interested party (a) withholds requested
information; (b) fails to timely provide information in the form requested; (c) significantly
impedes proceedings; or (d) provides information which cannot be verified under 19 U.S.C.
§ 1677m(i). See, e.g., Ningbo Dafa Chem. Fiber Co. v. United States, 580 F.3d 1247, 1251 (Fed.
Cir. 2009). In this case, Commerce alleges that recourse to facts otherwise available was proper
because certain information was not reasonably available in the record, § 1677e(a)(1), Hyundai’s
December 29 database submissions were untimely, § 1677e(a)(2)(b), and Hyundai significantly
impeded the proceeding through delays and the provision of unusable information,
§ 1677e(a)(2)(c). See Prelim. Det. I&D Memo. at 12; Final Det. I&D Memo at 13; Def. Br. at
24.
All scenarios described in § 1677e(a) are subject to the requirement that Commerce, upon
determining that a respondent has submitted non-compliant information, promptly inform that
respondent of the nature of the deficiency and, to the extent practicable in view of statutory
investigation time-limits, provide an opportunity to remedy or explain the deficiency. 19 U.S.C.
§ 1677e(a) (2015), 1677m(d) (2015). If respondent is unable to timely remedy the deficiency,
Commerce may, subject to 19 U.S.C. § 1677m(e), disregard “all or part of the original and
subsequent responses.” 19 U.S.C. § 1677m(d); SAA at 865.
Section 1677m(e) precludes Commerce from ignoring information, even if it doesn’t
satisfy all requirements established by Commerce, where the interested party can demonstrate:
(1) it “acted to the best of its ability” in supplying compliant information; and (2) the information
(a) is timely submitted, (b) is verifiable, (c) is not so incomplete that it cannot furnish a reliable
Court No. 16-00161 Page 15
basis for making the determination, and (d) can be used without undue difficulties. 19 U.S.C.
§ 1677m(e). If these criteria are not satisfied, Commerce is not statutorily obligated to allow
respondent to remedy its submission. See Papierfabrik Aug. Koehler SE v. United States, 843
F.3d 1373, 1382 (Fed. Cir. 2016), cert. denied, 2017 WL 3324989 (U.S. Dec. 11, 2017) (No. 17-
171).
To resolve this case, the court must first consider whether Commerce’s determination
that, under § 1677e(a), Hyundai failed to provide requested data is supported by substantial
evidence. If so, the court must consider whether Commerce met its obligations, under
§ 1677m(d), to notify Hyundai of deficiencies in its submissions. If Commerce has satisfied its
obligations, the court must next determine whether substantial evidence supports a finding that
Hyundai failed to satisfy the elements of § 1677m(e). For data which fails to satisfy § 1677m(e),
the court must finally consider whether Commerce drew an adverse influence under § 1677e(b)
based on substantial evidence and in accordance with the law.
a. Commerce established that requested data regarding Hyundai’s sales of TWBs,
auto parts, and SSBs was missing, such that Commerce had to resort to other
facts available.
The court must determine whether substantial evidence indicates that Commerce both
made a request and the fact of the missing information. “The reason for the failure is of no
moment. The mere failure of a respondent to furnish requested information—for any reason—
requires Commerce to resort to other sources of information to complete the factual record on
which it makes its determination.” Nippon Steel Corp. v. United States, 337 F.3d 1373, 1381
(Fed. Cir. 2003). In Commerce’s Final Determination, it found deficiencies with Hyundai’s
(1) costs and sales data associated with TWBs and auto parts, and (2) costs data associated with
SSBs. Final Det. I&D Memo at 7–14, 36–38; Prelim. Det. I&D Memo. at 10–13.
Court No. 16-00161 Page 16
Hyundai argues that Commerce cannot claim the information was missing because it was
never properly requested. Indeed, “unless the requisite information has been fairly requested [by
Commerce], it is inappropriate to take recourse to [other facts available].” Koyo Seiko Co. v.
United States, 92 F.3d 1162, 1165 (Fed. Cir. 1996). Compare Allegheny Ludlum Corp. v.
United States, 215 F. Supp. 2d 1322, 1339, 24 C.I.T. 1424, 1442–43 (2000) (finding that, where
Commerce requested data related to all “home market sales” and the standards for home market
sales were clear, it had not “‘hidden the ball’ in its initial requests for information . . . ”); with Ta
Chen Stainless Steel Pipe, Ltd. v. United States, 23 C.I.T. 804, 818–19 (1999) (finding that,
where Commerce had failed to “specifically” request information regarding a particular
affiliate’s US sales, it had failed to provide respondent with sufficient notice). Hyundai argues
that Commerce’s instructions presented a “shifting target” as to how Hyundai should have
formatted its calculations, and did not account for manufactured products incorporating multiple
product control numbers (“CONNUMs”). Pl. Br. at 23, 28, 30.
As § 1677e(a) allows responses to be set aside based on inadequacy of either form or
substance, such a deficiency would preclude finding a proper request. Commerce first requested
data on Hyundai’s further manufactured products on October 15, 2015, in its “Section E”
questionnaire. Section E Request at 1. Three supplemental “Section E” questionnaires were
subsequently issued on November 19, 2015, December 15, 2015, and February 5, 2016.
Although the standards applicable to Hyundai’s further manufactured goods reporting
were less settled than the “home market sales” at issue in Allegheney Ludlum, it is likewise clear
that in this case Commerce has not “hidden the ball.” See 215 F. Supp. 2d at 1439. Commerce’s
October 15 letter requested the following: (1) sales data for TWBs and auto parts, and (2) “a
section E response and a data base for [TWBs and auto parts], as well as for the products which
Court No. 16-00161 Page 17
are coded [SSB] in the section C data base submitted on September 29, 2015.” Section E
Request at 1. The supplemental request which followed featured twelve questions aimed
primarily at clarifying units used, explaining calculation methods, and requesting that certain
gaps be filled. Second Supplemental Questionnaire to Sections B&C, and First Supplemental to
Further Manufacturing, A-580-878, POI 04/01/2014–03/31/2015, at Attach. 1:1–2 (Dep’t
Commerce Nov. 19, 2015) (“First Sec. E Supp. Q.”). The December 15, 2015, supplemental
request generally focused on manufacturing costs, as well as Hyundai’s calculations regarding its
individual processors and their associated expense ratios. Antidumping Duty Less Than Fair
Value Investigation of Certain Corrosion-Resistant Steel Products from the Republic of Korea,
A-580-878, POI 04/01/2014–03/31/2015, at 3–4 (Dep’t Commerce Dec. 15, 2015) (“Second Sec.
E Supp. Q.”).
The final supplemental request sought to clarify Hyundai’s breakdown of the components
incorporated into each further manufactured product. Hyundai claimed to have implemented the
same approach used in Mexican Galvanized Wire, wherein respondent was instructed to adapt
Commerce’s standard reporting by breaking down the percentage of each subject and non-
subject input in a further manufactured product by weight. Hyundai’s approach, however,
omitted non-subject inputs, a difference for which Commerce sought explanation. See
Supplemental Questionnaire to Section E, A-580-878, POI 04/01/2014–03/31/2015, at Attach. 1
(Dep’t Commerce Feb. 5, 2016) (“Third Sec. E Supp. Q.”); Galvanized Steel Wire from Mexico:
Second Supplemental Questionnaire, A-201-840, POI 01/01/2010–12/31/2010, at 6–8 (Int’l
Trade Admin. Sept. 16, 2011) (“Mexican Galvanized Wire”). Though it would have certainly
simplified the process for Commerce to have directed Hyundai to apply the Mexican Galvanized
Court No. 16-00161 Page 18
Wire approach from the outset, taken together, the foregoing correspondence was sufficiently
specific to satisfy Commerce’s burden to request the information.
Moreover, Hyundai’s exclusion of non-subject inputs in conducting the Mexican
Galvanized Wire calculations for its TWBs and auto parts sales skews subsequent calculations
by yielding different percentages when determining the make-up of a finished manufactured
product, percentages used to calculate adjusted gross price and manufacturing costs. Hyundai
Steel’s Response to the Department’s Supplemental Section E Questionnaire, A-580-878, POI
04/01/2014–03/31/2015, at Attach. 1:1–2 (Feb. 10, 2016) (“Hyundai’s Supp. Sec. E Q.
Response”). See Def.-Int. Br. at 32–33. This constitutes two violations of § 1677e(a): First,
Hyundai omitted data related to non-subject inputs, violating § 1677e(a)(1); and second, Hyundai
failed to report data in a form requested by Commerce, violating § 1677e(a)(2)(b). Commerce
noted myriad other deficiencies in Hyundai’s TWB and auto parts data, 14 but having established
the above, it is only necessary to note that Hyundai’s December 29 databases did not fill gaps
regarding its TWB, auto part, or SSB data.
Hyundai notes that the request which precipitated Hyundai’s December 29 response
directed it to “provide a new further manufacturing cost database.” Second Sec. E Supp. Q. at 4.
14
These included the following: Contrary to Hyundai’s narrative responses, the quantity of
subject inputs used to produce a further manufactured product did not equal the sales quantity of
the subject input. Prelim. Det. I&D Memo at 11. Hyundai twice revised the manufacturing cost
of TWBs downward without explanation. Prelim. Det. I&D Memo at 12. When asked for an
explanation, see Second Sec. E Supp. Q. at 3, Hyundai magnified the problem by making
additional, unrequested changes, see Hyundai Steel’s Response to the Department’s
Supplemental Section E Questionnaire, A-580-878, POI 04/01/2014–03/31/2015 (Dec. 29, 2015)
(“Hyundai’s Supp. Sec. E Q. Response”); Verification Cancellation Letter at 1–2. Finally,
Hyundai’s incorporation of processing costs incorrectly reported weighted averages and omitted
shearing costs, despite the fact roughly one-third of Hyundai’s TWB inputs require shearing.
Verification Cancellation Letter at 2; Def. Br. at 26.
Court No. 16-00161 Page 19
This particular request, however, was limited to “changes resulting from the questions above,” id.,
and Commerce’s Second Supplemental Questionnaire never referred to changes in the costs of SSBs.
Hyundai’s Supp. Sec. E Q. Response. Regarding TWBs and auto parts, Hyundai argues the
databases were timely attempts to reconcile its affiliates’ general and administrative (“G&A”)
expense ratios, revisions it contends were plainly envisioned by Commerce’s questionnaire,
which generally aimed at reconciling individual producers’ expenses. Second Sec. E Supp. Q. at
4; Pl. Br. at 25. Hyundai went much further than even that interpretation would allow, by, for
example, revising its G&A expense ratio further downward (from 2.35 percent to 1.75 percent),
instead of explaining how its G&A expense ratio was calculated, as requested. Def. Br. at 29–
30. Hyundai’s non-responsive databases are excludable under § 1677e(a)(2)(b). 15
Regarding the sufficiency of Hyundai’s SSB data, Commerce found that Hyundai’s
December 29 submission included significant, unexplained downward adjustments in
manufacturing costs and yield loss. There were, furthermore, inconsistencies among Hyundai’s
narratives, exhibits, and databases. Verification Cancellation Letter at 1–2. Both errors fall
under either § 1677e(a)(1) or § 1677e(a)(2)(c).
As Hyundai failed to submit fairly requested information regarding its TWBs, auto parts,
and SSBs, under § 1677e(a) Commerce reasonably identified a gap in the record.
15
As an omission grounded only in § 1677e(a)(2)(b), a full analysis would consider whether
Commerce acted in accordance with § 1677m(c)(1), which requires Commerce to “consider the
ability” of a respondent who promptly notifies Commerce of its inability to submit information
in the requested form and manner, together with a full explanation and suggested alternative
forms. As Commerce has other grounds for omitting Hyundai’s TWB, auto part and SSB data,
which Hyundai does not claim are remedied by the additional databases, the court need not reach
this issue. Even if this were considered, Commerce’s ex parte correspondence with Hyundai
over the course of the investigation, indicates that it acted in accordance with the law by
considering Hyundai’s reporting difficulties, which were in any event repeatedly overstated by
Hyundai.
Court No. 16-00161 Page 20
b. Commerce timely identified Hyundai’s data deficiencies regarding its TWBs and
auto parts, and provided an opportunity to respond, but did not timely identify
Hyundai’s data deficiencies regarding its SSBs.
The parties frame Hyundai and Commerce’s exchange of information quite differently.
Commerce characterizes its supplemental “Section E” questionnaires as providing Hyundai an
opportunity to correct deficiencies in its initial “Section E” response of November 2, 2015.
Commerce thus argues that § 1677m(d) does not require it provide Hyundai with a further
opportunity to correct the deficiencies in its supplemental responses. Hyundai, on the other
hand, characterizes the supplemental questionnaires as requesting new information, rather than
identifying prior errors. It therefore contends the questionnaires are themselves subject to
§ 1677m(d)’s requirement that a respondent be given an opportunity to correct deficiencies in a
response. See Final Det. I&D Memo at 30. Supplemental questionnaires do not, by their nature,
necessarily indicate error in a respondent’s earlier submission. A questionnaire may, for
example, simply reflect the agency’s determination that new information would aid in its
decision-making. To determine whether Commerce’s characterization of the questionnaires is
supported by substantial evidence, the court turns to the questionnaires themselves.
Commerce’s characterization of the supplemental questionnaires at issue is indeed
persuasive. Although portions of Commerce’s first supplemental questionnaire could be
construed as simply requesting new information, see, e.g., First Sec. E Supp. Q. at Questions 1–
3, others are clearly aimed at remedying deficiencies in Hyundai’s November 2, 2015, response,
see, e.g., id. at Questions 4, 6–8, 10 (identifying inconsistencies and overlap in Hyundai’s data,
requesting Hyundai comply with Commerce’s original reporting instructions to report each
component as a separate sale, and further requesting Hyundai specify units for a number of its
figures). Commerce’s Second Supplemental Questionnaire concerns Hyundai’s November 30,
Court No. 16-00161 Page 21
2015, response and again identifies specific deficiencies. Second Sec. E Supp. Q. at Questions
3–4 (noting the downward adjustment in TWB processing costs and the ambiguity as to which
cost buildup related to which processor); Final Det. I&D Memo at 30. It furthermore requested
Hyundai explain its reporting and provide further production expense breakdowns. Id. at
Questions 6–7. Finally, Commerce’s Third Supplemental Questionnaire concerned Hyundai’s
December 29, 2015, submission, and noted inconsistencies among two of Hyundai’s variables,
requesting Hyundai to “explain and document why” these variables were different. Third Sec. E
Supp. Q. at Attach. 1. Commerce’s questionnaires thus constitute opportunities for Hyundai to
correct data deficiencies under § 1677m(d).
Commerce is obligated to notify Hyundai promptly of the nature of its data deficiencies.
19 U.S.C. § 1677m(d). Hyundai argues Commerce’s five-week delay in responding to its
December 29 submission fails to satisfy this standard, considering the limited statutory
timeframe for an antidumping investigation. Pl. Br. at 29–30. As Hyundai’s December 29
submission was itself a correction of earlier deficient submissions, it falls outside the strictures of
§ 1677m(d). Commerce’s Third Supplemental Questionnaire was aimed at fixing deficiencies in
Hyundai’s attempts to revise its initial responses. Furthermore, Hyundai was notified of the
particular issue addressed by the Third Questionnaire in Commerce’s Preliminary Determination.
Compare Prelim. Det. I&D Memo at 11; with Third Sec. E Supp. Q. at Attach. 1. Commerce’s
First and Second Supplemental Questionnaires, which are subject to § 1677m(d), followed mere
weeks after the submissions to which they referred and were certainly prompt. Furthermore,
these supplemental questionnaires adequately notified Hyundai of the nature of its deficiencies,
and requested specific corrections.
Court No. 16-00161 Page 22
Between issuing its Second and Third Supplemental Questionnaire, Commerce in its
Preliminary Determination indicated further deficiencies in Hyundai’s initial reporting, including
unexplained and unsolicited changes to Hyundai’s further manufacturing costs, inconsistencies
between Hyundai’s narrative response and database, and a mathematically incorrect
methodology for reporting sales quantity. See Prelim Det. I&D Memo at 11–13. Hyundai never
addressed these concerns, but contends it was never given the opportunity to do so. Commerce’s
Preliminary Determination indicated that: “We intend to provide Hyundai with such an
opportunity [to remedy these reporting deficiencies] in the weeks ahead.” Id. at 12.
Commerce’s Preliminary Determination was announced on December 21, 2015, and was
followed on December 29, 2015, by Hyundai’s Second Supplemental Questionnaire response.
Commerce alleges that the quoted phrase from its Preliminary Determination I&D Memo was a
reference to Hyundai’s then-forthcoming December 29 response, whereas Hyundai argues
Commerce effectively promised an additional opportunity to respond which never materialized.
In other circumstances, the court has noted that Commerce “should do its utmost to be
fair” in selecting the data it uses. Husteel Co., Ltd. v. United States, 98 F. Supp. 3d 1315, 1345
n.20 (CIT 2015), opinion after remand, 180 F. Supp. 3d 1330, appeal docketed for opinion after
remand, No. 17-1013 (Fed. Cir. Oct. 5, 2016). Promising a further opportunity to address
deficiencies and failing to provide it does not satisfy this standard. Commerce’s Second
Supplemental Questionnaire indeed requests additional data regarding Hyundai’s further
manufacturing costs, see Second Sec. E Supp. Q. at Questions 3–4, 6–7, however it does not
mention inconsistencies between Hyundai’s narrative response and database, or a mathematically
incorrect methodology for reporting sales quantity. The single question on Commerce’s Third
Supplemental Questionnaire implicates one issue identified in the Preliminary Determination,
Court No. 16-00161 Page 23
but is not the broader “opportunity to remedy its further manufactured sales responses” which
Commerce appeared to suggest. Prelim. Det. I&D Memo at 12; Third Sec. E Supp. Q. at Attach.
1. Thus, Commerce created an expectation and failed to deliver.
For most of Hyundai’s excludable data, this failure does not alter the analysis. Hyundai
was indeed provided an opportunity to remedy some excludable data. Commerce’s Second
Supplemental Questionnaire allowed Hyundai to remedy or explain its downward revision of its
TWB costs and rectify issues with its average processing costs. Second Sec. E Supp. Q. at
Questions 3–4, 6–7. Hyundai was likewise afforded the chance to address discrepancies among
its quantity variables in Commerce’s Third Supplemental Questionnaire. Third Sec. E Supp. Q.
at Attach. 1. Other excludable data fell outside the scope of any remedial opportunity alluded to
by Commerce in its Preliminary Determination. Most importantly, Hyundai’s unsolicited
December 29 databases were not presented as a response to Commerce’s Preliminary
Determination, but rather as a response to an earlier Supplemental Questionnaire. As an
unsolicited portion of a questionnaire response not yet submitted at the time of the Preliminary
Determination, these databases could not have been what Commerce had in mind when
referencing an opportunity to cure then-existing deficiencies. Under § 1677m(d), this data was
reasonably excluded.
Commerce’s failure to provide its promised opportunity to address deficiencies does,
however, affect Commerce’s recourse to “facts otherwise available” in lieu of Hyundai’s SSB
data. As Hyundai has noted, issues with this data were not meaningfully highlighted until
Commerce’s Verification Cancellation Letter. See Verification Cancellation Letter at 2; Final
Det. I&D Memo at 29–30. This failure to timely notify is itself a violation of § 1677m(d).
Furthermore, the issues ultimately highlighted included discrepancies between the narratives and
Court No. 16-00161 Page 24
associated exhibits, exactly the sorts of discrepancies referred to in the Preliminary
Determination. Prelim. Det. I&D Memo at 12. In the Preliminary Determination, however,
these discrepancies were not specifically linked to Hyundai’s SSB data. Id. Thus, Commerce
both failed to provide prompt notice of a deficiency and acted unreasonably in promising an
opportunity to remedy this discrepancy, failing to provide such an opportunity, and then holding
the discrepancy against Hyundai. Further, Commerce’s Third Supplemental Questionnaire
precluded Hyundai from submitting “any new or revised sales, cost, or further manufacturing
databases in response.” Third Sec. E Supp. Q. at Attach. 1. Thus, Hyundai’s forbearance in not
affirmatively moving for exceptional treatment after the Preliminary Determination to submit
more information was reasonable. Accordingly, this matter will be remanded for Commerce to
address Hyundai’s SSB cost data, and to recalculate the overall margin as necessary.
c. Hyundai did not submit verifiable information concerning its sales of TWBs and
auto parts, and thus Commerce was not required to utilize this information
despite its deficiencies.
Hyundai argues its TWB and auto part data satisfies the five-part test under § 1677m(e)
and should nonetheless be included, even if it did not satisfy Commerce’s reporting
requirements. The extra databases included in Hyundai’s December 29 report did not, as
discussed above, fairly fall within the confines of Commerce’s Second Supplemental
Questionnaire. Thus, those databases do not satisfy the timeliness prong of § 1677m(e).
Hyundai’s repeated downward revisions of its TWB costs, the issues associated with its
TWB and auto part processing costs, and the discrepancies in its quantity variables will be
assessed together as follows. The parties strongly disagree as to whether this data was
“verifiable” within the meaning of § 1677m(i). If so, this data satisfies one prong of § 1677m(e),
and the remaining prongs must be assessed. Verification is typically regarded as a “spot check”
Court No. 16-00161 Page 25
of a respondent’s submissions. See Micron Tech., Inc. v. United States, 117 F.3d 1386, 1396
(Fed. Cir. 1997). Despite Hyundai’s contention to the contrary, Commerce need not accept
information it declines to verify “on its face.” Under § 1677m(i), Commerce is obligated only to
verify information it uses in making a final determination. Naturally, the ability to be verified is
a prerequisite. See JTEKT Corp. v. United States, 675 F. Supp. 2d 1206, 1252, 33 C.I.T. 1797,
1849–50 (2009).
Hyundai argues that, because Commerce had already verified other data at the facility
containing Hyundai’s further manufactured goods data, that it was both possible and feasible for
Commerce to verify both. Pl. Br. at 33. Commerce and defendant-intervenors contend that
Hyundai’s further manufactured goods data was so fundamentally flawed that it was
unverifiable. Def. Br. at 39; see generally Verification Cancellation Letter. Hyundai responds
that if Commerce found the data “unverifiable,” it would have been easy enough to submit it to
verification to test this hypothesis. Pl. Br. at 33. This pithy argument, however, ignores the fact
that Commerce’s cited grounds for unverifiability included “inconsistencies, and . . . multiple
unexplained, or insufficiently explained, changes” in Hyundai’s data. Verification Cancellation
Letter at 1. Commerce again cited these errors in more depth in its Final Determination Memo.
Final Det. I&D Memo at 29–30. As Section II(a) of this opinion indicated, these findings are
supported by substantial evidence. See JTEKT Corp., 675 F. Supp. 2d at 1252. Such
deficiencies are not fairly testable, as the crux of the deficiency is that Commerce, upon
reviewing the submissions in question, cannot discern which data is meant to be tested. Thus,
the remaining data at issue does not satisfy the verifiability prong of § 1677m(e). Commerce
was not required to consider Hyundai’s TWB or auto part data under § 1677m(e), and thus its
recourse to other facts available regarding this data was reasonable.
Court No. 16-00161 Page 26
d. Commerce’s application of an adverse inference when calculating Hyundai’s
antidumping margin was reasonable with regards to Hyundai’s TWB and auto
part data.
Commerce is authorized to “use an inference that is adverse to the interests of [a] party in
selecting from among the facts otherwise available” where that party has failed to cooperate to
the best of its ability. 19 U.S.C. § 1677e(b)(1). See SAA at 870. An adverse inference is thus
predicated upon an information request directed to an interested party and that party’s failure to
cooperate to the best of its ability. The existence of a request for information from Commerce
was established as discussed, supra. The remaining issue is whether Hyundai cooperated with
these requests to the best of its ability.
A respondent satisfies the “best of its ability” standard when it “put[s] forth its maximum
effort to provide Commerce with full and complete answers to all inquiries in an investigation.”
See Nippon Steel, 337 F.3d at 1382. The Federal Circuit noted this standard does not demand
perfection, but does not condone “inattentiveness, carelessness, or inadequate record keeping.”
Id. Instead, the statutory framework “requires the respondent to do the maximum it is able to
do.” Id. A respondent’s attempts to avoid supplying requested information generally preclude a
“best of its ability” finding. See Qingdao Taifa Grp. Co., Ltd. v. U.S., 637 F.Supp.2d 1231,
1239–40, 33 CIT 1090, 1096–97 (2009).
“The purpose of the adverse facts statute is ‘to provide respondents with an incentive to
cooperate’ with Commerce’s investigation, not to impose punitive damages.” Essar Steel Ltd. v.
United States, 678 F.3d 1268, 1276 (Fed. Cir. 2012) (quoting F.lli De Cecco Di Filippo Fara S.
Martino S.p.A. v. United States, 216 F.3d 1027, 1032 (Fed. Cir. 2000).). Accordingly, “[i]n
employing adverse inferences, one factor the agencies will consider is the extent to which a party
may benefit from its own lack of cooperation.” SAA at 870.
Court No. 16-00161 Page 27
Hyundai emphasizes that it submitted fifteen responses, participated in three separate
verifications wherein only minor issues were found, and repeatedly sought guidance from
Commerce regarding its reporting difficulties. Pl. Br. at 20–22. Furthermore, Hyundai notes, it
made every effort to devise allocation methods to account for the subject CORE portion of the
final product prices, despite the fact that certain aspects of its production process were not
represented easily in Commerce’s standard questionnaire. Pl. Br. at 23–24. Hyundai alleges
Commerce has “rarely, if ever, attempted to account for” such a complex further manufacturing
process in its dumping margin calculations. Id. at 23.
In response, Commerce notes that despite multiple attempts, Hyundai’s repeatedly
unusable or deficient responses indicate inattentiveness. Final Det. I&D Memo at 38.
Commerce further notes that Hyundai later rescinded many of its claimed reporting difficulties,
and underestimated the percentage of its sales affected by faulty submissions. Def. Br. at 36–37.
Whereas Hyundai claimed only one percent of sales were affected, Commerce later discovered
that ten percent of sales were affected. See Final Det. I&D Memo at 38. Commerce further
argues that it attempted to accommodate Hyundai by offering filing extensions, agreeing to ex
parte meetings when requested, and providing multiple chances for Hyundai to remedy its filing
deficiencies. Final Det. I&D Memo at 13–15, 29–30. There is, however, no indication, other
than unsubstantiated allegations that Hyundai engaged in “delay tactics,” Def.-Int. Br. at 38, that
Hyundai deliberately concealed or withheld information, so that a broader use of AFA might be
applicable.
Commerce did not act arbitrarily or contrary to law in determining to apply an adverse
inference in applying “facts otherwise available,” restricted to Hyundai’s further manufactured
sales of TWBs and auto parts. Although Hyundai appears to have been diligent in many ways, it
Court No. 16-00161 Page 28
did not act to the “best of its ability” in complying with Commerce’s requests for TWB and auto
parts data. Minor delays and inaccuracies may be excusable where a respondent’s complex
supply chain is difficult to translate into Commerce’s standard forms. Nevertheless, “[i]n
preparing a response to an inquiry from Commerce, it is presumed that respondents are familiar
with their own records.” Nippon Steel, 337 F.3d at 1383. The most significant shortcomings in
Hyundai’s performance are its repeated retractions of claimed reporting difficulties and its
inaccurate estimation of how many sales were affected by its reporting errors. These suggest, at
minimum, the sort of inattentiveness Nippon Steel held not to satisfy the “best of its ability”
standard.
CONCLUSION
For the foregoing reasons, Hyundai’s motion for judgment on the agency record is
GRANTED, in part, and DENIED, in part. This matter is REMANDED for Commerce to
provide Hyundai the opportunity to remedy data deficiencies as to SSBs, and to recalculate
Hyundai’s antidumping margin as appropriate.
/S/ Jane A. Restani
Jane A. Restani
Judge
Dated: January 10, 2018
New York, New York