STATE OF MICHIGAN
COURT OF APPEALS
STEVEN ILIADES and JANE ILIADES, UNPUBLISHED
July 19, 2016
Plaintiffs-Appellants,
v No. 324726
Oakland Circuit Court
DIEFFENBACHER NORTH AMERICA INC, LC No. 12-129407-NP
Defendant-Appellee.
Before: RONAYNE KRAUSE, P.J., and JANSEN and STEPHENS, JJ.
JANSEN, J. (dissenting).
I respectfully dissent. I would affirm the trial court’s order granting summary disposition
in favor of defendant in this product liability action under the theory that plaintiff’s conduct
constituted unforeseeable misuse.
The parties dispute whether plaintiff’s conduct constituted a misuse of the press and
whether his conduct was reasonably foreseeable. The statute at issue in this case, MCL
600.2947(2), provides, “A manufacturer or seller is not liable in a product liability action for
harm caused by misuse of a product unless the misuse was reasonably foreseeable. Whether
there was misuse of a product and whether misuse was reasonably foreseeable are legal issues to
be resolved by the court.” Misuse is defined as “use of a product in a materially different
manner than the product’s intended use.” MCL 600.2945(e).
Misuse includes uses inconsistent with the specifications and standards applicable
to the product, uses contrary to a warning or instruction provided by the
manufacturer, seller, or another person possessing knowledge or training
regarding the use or maintenance of the product, and uses other than those for
which the product would be considered suitable by a reasonably prudent person in
the same or similar circumstances. [Id.]
“Foreseeability of misuse may be inherent in the product or may be based on evidence that the
manufacturer had knowledge of a particular type of misuse.” Portelli v IR Constr Prod Co, Inc,
218 Mich App 591, 599; 554 NW2d 591 (1996).
Plaintiff’s action of partially climbing into the press constituted a misuse of the press.
The evidence established that plaintiff acted contrary to the instructions provided by a person
-1-
with knowledge or training regarding the use of the press. According to plaintiff, he reached into
the press to retrieve parts. His torso and back were inside the press. Plaintiff testified during his
deposition that his left foot remained on the platform and his right knee “leaned in” onto the
guard or the metal skirting on the front of the press so that he could reach further into the press.
Plaintiff’s conduct was contrary to his training. The type of press used by plaintiff may operate
in either manual mode, in which an operator must push a button or move a joystick with regard
to every motion made by the press, or automatic mode, in which the operator initiates a cycle and
then the press moves without additional actions by the operator. Plaintiff’s supervisor, Charles
Green, found plaintiff trapped in the press while the press was in automatic mode.
Joe Whiteside, a trainer who worked for Flexible Products for 17 years and who operated
a press every day for 15 years, was the person who trained plaintiff. Whiteside trained a number
of other people before training plaintiff. Whiteside trained plaintiff never to reach inside the
press when it is in automatic mode. Instead, he explained that an operator must put the press in
manual mode before going inside it. He explained during his deposition, “There’s two main
rules. One is to always, whenever you’re going inside the press, to ensure that it’s on manual . . .
.” With regard to the light curtain, Whiteside told plaintiff, “Do not bypass the light curtain.”
He explained during his deposition that the light curtain is a safety device and that an operator
must put the press in manual mode before going into the press regardless of the light curtain
because the light curtain was not designed to be an “on/off switch.” He also explained that it is
unnecessary to reach into a press to pull out a part while the press is in automatic mode because
clean-up occurs at the end of the shift. Plaintiff did not contradict Whiteside’s testimony in his
deposition. Although plaintiff testified that he was never told that he could not reach into the
press and that “[t]he emphasis was put on a light curtain,” plaintiff did not indicate that
Whiteside instructed him that he could reach into the press without putting the press in manual
mode or that he could partially climb into a press in order to obtain a part. Therefore, the
evidence established that plaintiff was instructed not to reach into a press without putting it in
manual mode and not to use the light curtain as an on/off switch.
It is clear that plaintiff used the press contrary to the warnings and instruction provided
by Whiteside. Whiteside is a person who possessed knowledge or training regarding the use of
the product through the 15 years he worked continuously with the presses and through his
experience as a trainer. Whiteside instructed plaintiff not to reach into a press when it is in
automatic mode and not to bypass the light curtain. I conclude that the evidence established that
plaintiff misused the press by partially climbing into the press to retrieve parts while the press
was in automatic mode. See MCL 600.2945(e).
The trial court also did not err in concluding that the misuse was not reasonably
foreseeable. I agree with the majority that some manner of accidental or nonaccidental reaching
into a press while the press is in automatic mode was reasonably foreseeable, which is why the
light curtain was installed. However, I disagree with the majority’s conclusion that plaintiff’s act
of partially climbing into the press while the press was in automatic mode was reasonably
foreseeable.
First, there is no indication that this type of incident ever occurred before. The light
curtain on Press Number 25 was installed in 1997. There is no evidence that any other injuries
occurred from an operator partially climbing into a press during the over 13-year period that the
-2-
light curtain system was in place before plaintiff’s accident. Several witnesses testified that they
had not received a report of another incident occurring under similar circumstances. James
Michalak, a maintenance general supervisor, was unaware of any press operator climbing into a
press in order to retrieve parts. The majority alludes to the fact that a regular operator of Press
Number 25 noticed that the press would clear even if something traversed the press opening.
James Preston, a production supervisor who had used Press Number 25 in the past, testified in
his deposition that the light curtain reset when he leaned into or reached into the press to obtain a
runner. He admitted that his action of standing inside the light curtain was contrary to his
training and that he “wasn’t supposed to be doing that.” Preston also explained that he did not
inform his supervisor regarding the issue. Instead, the issue seemed to only happen with Preston
because he was “so skinny,” and he was the only one who encountered the issue with the press.
Furthermore, Preston did not testify that he partially entered the press by lifting one leg onto the
ledge of the press in the manner that plaintiff did, instead testifying that he reached into or leaned
into the press. Consequently, there is no indication that anyone had ever suffered the type of
injury that plaintiff suffered as a result of climbing partway into the press.
Second, there is no indication that climbing or partially climbing into a press from the
front while the press is in automatic mode was common practice, and the fact that press operators
relied on the light curtain to stop the press does not establish that plaintiff’s conduct was
reasonably foreseeable. The majority concludes that the evidence created a genuine issue of fact
regarding whether the press operators could practically remove the finished products from the
presses without reaching into the presses. There is no dispute that the operators were required to
obtain parts from inside the press on occasion. However, the operators were required to put the
press in manual mode beforehand in order to prevent the press from cycling while the operator
was reaching inside it. The majority further concludes that press operators routinely relied on the
light curtain when removing finished products from the presses. While it is true that there was
evidence indicating that the press operators relied on the light curtain to stop a press in order for
the operators to momentarily reach into the press and remove parts, there was no indication that
the press operators routinely climbed or partially climbed into the press through the front
opening in order to obtain parts while the press was in automatic mode.1 In fact, there appears to
be no legitimate reason why a press operator would partially climb into a press while it was
cycling in automatic mode. Therefore, I conclude that plaintiff’s conduct was not reasonably
1
Plaintiff put his upper body and torso inside the press, and he placed his right knee onto the
metal skirting on the front of the press. The press came down onto plaintiff’s lower back and
pushed his chest into his thigh. As a result, plaintiff’s lower back and knee were injured. The
location and extent of plaintiff’s injuries highlight the fact that he went grossly beyond merely
placing his hand into the press, which is reasonably foreseeable behavior, and instead partially
climbed into the press, which is not reasonably foreseeable behavior.
-3-
foreseeable. See MCL 600.2947(2). Accordingly, I would affirm the trial court’s order granting
summary disposition in favor of defendant.
/s/ Kathleen Jansen
-4-